SarovaUsed pipeline pumpProfessional standards for Industry Segmentation
release time:2023-01-10 10:00:41

  The non service life of the equipment is not as long as possible. If it is not used for a long time, it will not only easily corrode the parts,  In this way, the upper guide housing is installed in turn. After the pump is installed, pull the pull nut, take out the gasket, tighten the pull nut evenly, and then rotate the electric pump from the coupling. The rotation must be uniform.  In addition to the main impeller inside the equipment, a set of impeller for mixing will be added at the bottom of the equipment, so that some mortar slowly settled inside the equipment can be mixed with water to become a flowing medium,SarovaSelf priming non clogging sewage pump, so that the equipment can be used without itsIzegem,  The use of water pumps for agricultural drainage and irrigation can improve the ability of agriculture to resist natural disasters, increase production and ensure income and provide material conditions for agricultural mechanization and water conservancy.  In fact, it can only be opened or closed, and the action time when opening and closing is relatively short.  Some impurities will entangle the impeller, the open impeller will be used, so there is no need to worry about getting stuck in the process of transporting sewage.


SarovaUsed pipeline pumpProfessional standards for Industry Segmentation



   One frequency converter with one slurry pump is adopted for installation. The specific transformation method is as follows: close the return valve adopt the water level closed-loop control mode, install the liquid level sensor on the inner wall of the tank by the manufacturer of the slurry pump, and use the PID adjustment of the frequency converter. When  Tighten the terminal blocks.  The application of pumps involves all aspects of work and production, and the types of pumps are also diverse. Some of the same pump have several names, and some of the names are very similar, which makes it difficult to distinguish. Today, we will introduce the submersible pump and the submersible slurry pump. Is there any difference between the twobuild,  Potential is convenient and flexible. It is easy to operate. It can be operated by a fool who turns on the power supply under immersion; It has a wide range of applications. In many cases, it belongs to a portable workstation, which can be brought wherever it is needed because it does not need too many auxiliary facilities.  Submersible slurry pump shaft seal type: packing, packing and auxiliary impeller seal, mechanical seal, etc.  Sex is different. Although the submersible slurry pump is widely used, the correct application is very important. Due to the limitation of the name of the slurry pump, some people outside the industry misunderstand this. In fact, the impurity pump, dredging pump, etc. are all in the application scope of the slurry pump


SarovaUsed pipeline pumpProfessional standards for Industry Segmentation



  Body. So that the pump can realize high concentration transmission without auxiliary devices. The unique sealing device can effectively balance the pressure inside and outside the oil chamber,SarovaWear resistant slurry pump, so that the pressure at both ends of the mechanical seal can be kept balanced, which maximizes the reliable operation of the mechanical seal and greatly extends its service lifeWhich one is better,  There is a difference between submersible slurry pump and sewage pump. Although the media conveyed by the two are not pure water and other media, the difference between slag slurry and sewage is still large. Let&#;s take a look at the difference between the two.  What faults will the water pump control cabinet often encounter in use? The water pump cannot work: cause: a. the power supply is not connected or the output phase of the control cabinet is missing; b. The water pump has been burnt out, and the water pump can not supply water: cause: A. whether there is water in the pool; b. Whether there is gas in the pump body that is not discharged; c. Inlet and outlet water  The submersible slurry pump is a slurry pump which is connected with the motor and works under the water at the same time. Compared with horizontal slurry pump and vertical slurry pump, the biggest advantage is that it is flexible, convenient and easy to apply to various working conditions. The most important technical point of submersible slurry pump is the tightness between its motor and pump body Stability and reliability of seals.Sarova,  If there is a standby pump, it is recommended that the two pumps be used in turn. When the equipment is in use, it can pretend that a filter screen plays the role of filtration,SarovaVertical non clogging sewage pump, so as to avoid a lot of impurities entering the equipment and causing pump jamming.   repair and level the welding part of the submersible slurry pump with a file, clean the part to be bound with alcohol again and wipe it dry.   selection of raw materials for flow passage parts: the raw materials for flow passage parts of the pump can be selected according to the particle composition, particle size, shape, hardness, concentration, acid, alkali and other characteristics of the transported materials.

comment list
©2009-2024Industrial Microblog  Sitemap