Problem: The power indicator light of the aluminum alloy elevator is not on, and the lifting does not operate. Method: Check whether the power cord is correctly connected to the power socket; Check whether the circuit breaker switch is closed and whether the leakage protection switch is tripped.Regularly check whether the operation of each mechanism is normal and whether there is any noise. If any faults are found, they must be promptly eliminated.Prato,Attention: When replacing the adjusting steel wire rope, the half round head bolt should be unscrewed first to allow the moving nut to roll together with the force bolt, so as not to move the nut up and down too much and damage other components. After replacing the safety wire rope of the aluminum alloy elevator platform, adjust the position of the collision rod from the beginning to reach the ultra-high limit position. The limit switch of the aluminum alloy elevator platform should be regularly inspected and replaced or repaired in case of damage.Regularly check all wires and cables for damage. Timely bandage and replace damaged parts.Borlange,An aluminum alloy elevator equipment consisting of a walking mechanism, hydraulic mechanism, electric mechanism and support mechanism. The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve,PratoAluminum alloy lifting platform, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.The contact opening and closing of the travel switch of each safety device must be reliable, rags, and removed parts should be checked for forgetting. After confirming that there are no errors. Only then can it be closed.Compact structure, small size in transportation status, able to enter the car of general elevators, as well as smooth door openings and narrow passages.When repairing an aluminum alloy elevator, in order to protect the safety of workers and ensure the repair effect there are many precautions to pay attention to during the maintenance process. We have summarized the relevant matters for your reference only.new product,Performance characteristics of Xiangte aluminum alloy elevator: The hydraulic system of aluminum alloy elevator products is generally equipped with safety protection devices such as anti fall, overload, and power outage. The entrance and exit of the table are equipped with hanging chains or crossbars, guardrails, and warning lights or bells for the operation of the lifting platform, as well as safety switches that close the lifting platform circuit when the door is open. Extremely generous, operators can operate in multiple layers, jog or safe mode.After working for hours, the mechanical and electrical systems of the elevator will be overhauled.After working for hours, the mechanical and electrical systems of the elevator will be overhauled.

Each box,PratoMobile aluminum alloy elevator, distribution box, and the contact crater should be polished in a timely manner.Check if the power transmission chain between the aluminum alloy steel plates is working properly.The application of hydraulic aluminum alloy elevators in our production is already very common, and they play an important role in our production,PratoAluminum alloy profile elevator, especially in high-altitude operation of goods.Prato,Regularly check the connection of each part and tighten it if there is any looseness. The tightness of the body connecting bolts should be checked when the body is under pressure (the rotating arm can be used to cause compression), and all connecting shafts must have split pins and be sufficient. Professional itemsThe scientific design schemes for aluminum alloy elevators mainly include leveling and locking circuits, telescopic balance circuits variable amplitude balance circuits, emergency lowering systems, etc. In order to prevent sudden damage to the hydraulic system or pipelines of the platform due to accidents, and to ensure that the workbench does not experience situations that endanger the safety of personnel and equipment such as sudden arm fall or workbench overturning, we have designed different solutions for each system according to its different conditions.Hydraulic aluminum alloy elevators operate up and down, and can provide us with a safe and stable platform. We can provide security for our safety when working at heights.