Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging.Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.Weert,In daily life, if you accidentally drop the lifting objects and appliances on the wooden floor, or there are small stones on the sole of your shoes walking on the wooden floor, the surface of the wooden floor will be damaged to varying degrees and the paint on the floor surface will be damaged. The owners of residential areas must take precautions,It is recommended that customers place a blanket anti-wear layer in the outdoor entrance and room: the anti-wear layer is made of surface paper pre impregnated melamine epoxy resin and metal composite, such as wear resistance, depiction resistance, smoke burning resistance, environmental pollution resistance, corrosion resistance and waterproof. It also happens that this feature constitutes many advantages of strengthening the anti-static floor different from the lacquer wood floor, but also reasonably saves cleaning time,Convenient customers quickly enjoy a high sense of rhythm of daily life.The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processLaplace City,Of course its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring? Rich colors and patternsDefects: small blisters can not be repaired after damage, and the upper foot is poor.

What is the difference between solid wood flooring and solid wood composite flooring? Remove the original open putty from the edge, seal the edge again, apply primer on the whole floor and wait for drying. easy careTrustworthy,Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard,WeertWalnut floor decoration effect drawing, such as marble, wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.Of course, what are the reasons for the popularity of SPC flooring?The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride is an environment-friendly, non-toxic and renewable resource. It has been widely used in people&#;s daily life, such as tableware and medical infusion pipe bags. Its environmental protection does not need to be worried.SPC floor (sheet) is mainly composed of natural stone powder, which does not contain any radioactive elements after testing by national authoritative departments. It is a new green and environmental protection ground decoration material.

Various surface treatments (concave convex pattern, hand grip pattern pair pattern, mirror pattern)Excellent service,The flame retardant grade is B, and the indoor formaldehyde meets the national industry standard.The solid wood composite floor made of melamine formaldehyde resin has certain formaldehyde content standards, and the environmental protection requirements must comply with the national standard GB-, that is the national standard GB- requires ≤ mg/l. After days, maggots appeared on the floor.This problem is because the floor contains a lot of impurities.Weert, Good wear resistance and stability Anti skid. Compared with ordinary floor materials, the nano fiber feels more astringent when it is exposed to water and is less likely to slip. The more it meets water, the more astringent it becomes.It is suitable for families with old people and children. It is the preferred ground material in public places with high public safety requirements,WeertFloor leather is divided into several categories, such as airports, kindergartens, schools, etc.For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from,WeertHow about a wooden floor on the tiles, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.