FrackbrookWhich is a good cold storage project installationWhat are the privacy behaviors
release time:2023-01-10 12:57:42
lack of refrigerant, low pressure too low, excessive air intake, compressor jamming.Feasibility of the design scheme: the design of the quick-frozen warehouse can not be taken for granted. Many restrictive factors should be considered. In practice, a reasonable design scheme should be given according to local conditions. For example,FrackbrookCold storage manufacturer, the large-scale quick-frozen warehouse I built for my family should be refrigerated with ammonia in theory, because the refrigeration capacity of ammonia refrigeration is large, and I found that it is cheap to replicate cold through actual field investigation.Frackbrook,Balance windows shall be provided for the fabricated controlled atmosphere storage.The cold storage shall be regularly overhauled and maintained, so as to reduce the failure rate of the refrigeration unit and achieve good refrigeration effect.Santa-Rosa-de-Lima,Pay attention to the energy saving of the lighting system: the lighting of the cold storage should be considered comprehensively according to the area, height and warehouse temperature of the cold storage on the basis of safety, from the perspective of energy saving and environmental protection. The lighting in the cold storage is concentrated in the working area.It is required to set up a special tally room (area), and the temperature of the tally area is usually controlled at ~ + ℃.Application of parallel compressor in cold storage: the requirement of refrigeration capacity is large, and to refrigeration compressors under Malige need to be used on weekdays; Long term operation, large load peak valley difference and significant departmental load; Frozen and refrigerated objects are novel foods that are easy to decay and degenerate, and have strict requirements for temperature and humidity.


FrackbrookWhich is a good cold storage project installationWhat are the privacy behaviors



Thermal insulation rigid polyurethane has low thermal conductivity and good thermal performance. When the density of rigid polyurethane is ~ kg / m, the thermal conductivity is only . ~ .w / (m.k), which is the lowest among all thermal insulation materials at present.Clean the bearing of the fan and replace the oil.Generally, in the actual operation of the refrigeration system,FrackbrookInstallation of cold storage equipment manufacturer, because the temperature conditions are constantly changing, only by relying on the careful operation of the cold storage management personnel and accurately adjusting the operation of the refrigeration equipment of the cold storage,FrackbrookFruit and vegetable fresh-keeping cold storage installation company, can the refrigeration system always be in the ideal working state and achieve the effect of energy saving.Product range,Requirements for the cold storage time of the device: the cold storage of the refrigeration system using ammonia as refrigerant shall be supported in the place with low population density around.The cold storage shall be regularly overhauled and maintained, so as to reduce the failure rate of the refrigeration unit and achieve good refrigeration effect.In order to maintain a constant low temperature in the cold storage, attention should be paid to the installation of cold storage panels in Guizhou: the floor, wall and flat roof of the cold storage are laid with a certain thickness of thermal insulation materials to reduce the incoming heat from the outside. In order to reduce the absorption of solar radiation, the surface of the external wall of the cold storage is painted white or light color. Therefore, cold storage building is different from general industrial and civil buildings, and has its unique structure. Cold storage buildings should prevent the entry of air and the diffusion of water vapor.


FrackbrookWhich is a good cold storage project installationWhat are the privacy behaviors



Other aspects: in the design process of food cold storage, it is also necessary to consider the cooperation between the cold storage and on-site fire fighting, ventilation, water and electricity systems. It should meet the requirements of safety, science and environmental protection. When designing and installing the cold storage, the drainage problem must be considered, and the following points should be paid attention to during redesign and installation.device management,There are two kinds of refrigeration in the cold storage group: immediate refrigeration and simple refrigeration.Meteorological elements include local average temperature, relative temperature and summer monsoon frequency.Cork board: cork board can be said to be a relatively primitive kind of cold storage. The thermal conductivity of cork board is relatively low, and it is easy to obtain, so it is not difficult to process, so it is generally used as the insulation board in some ordinary cold storage. If you want to pursue better thermal insulation performance, you have to look at the following materials.Frackbrook,The installation of top warehouse plate should be carried out alternately with the installation of wall plate and the wall plate should leave a gap for withdrawing construction equipment; During the installation of the top warehouse plate, the end steel sheet at the overlap with the wall plate shall be disconnected for mm to prevent the cold bridge from running cold; Two layers of foaming materials shall be evenly and continuously punched on the joint surface between each top warehouse plate. Rivets shall be pulled and fixed at the internal and external lap joints of the steel plate, and the rivet spacing shall be mm; According to the design drawings if there are supporting beams, columns and supporting steel frames in the warehouse, the setting out and positioning shall be carried out and accurate and clear marks shall be made according to the requirements of the design drawings; Weld or install the support beam column, support steel frame, etc., and the welded junction shall be moisture-proof and treated according to the drawing requirements.The importance of regular oil discharge, descaling and air discharge in the refrigeration system of the warehouse.The three-dimensional automatic cold storage adopts a computer, which can complete the loading, unloading and stacking in the storage, the control of storage temperature and the operation of refrigeration equipment.

comment list
  • road repair farmer

    FrackbrookWhich is a good cold storage project installation The delivery is fast and the quality is good, but the logistics is a bit slow. Overall it is good, continue to support!

  • Gas filling station

    Every time I receive the goods is very pleasant, but as long as I think of evaluating it, my head is big. Fortunately, a omnipotent friend recommended your home FrackbrookWhich is a good cold storage

  • kai tong plastic products co., ltd.

    The stuff is really good, but FrackbrookWhich is a good cold storage project installation the price is a bit more expensive, but it is still worth the money. This is the first time I bought it, thanks

  • tianyi trading co., ltd.

    FrackbrookWhich is a good cold storage project installationHow much is the best price, and I will give you a comment, can FrackbrookWhich is a good cold storage project installation be cheaper?

  • Changyou Manufacturing Service Liability Company

    FrackbrookWhich is a good cold storage project installation The goods have arrived, much better than what you see in the picture!

©2009-2024Industrial Microblog  Sitemap