Select substrate densityIn this category, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.Haukipudas,Because the whole family decoration process will use a lot of raw materials such as solid wood plates and plywood as well as a lot of wooden furniture, and there is no professional pest control treatment before production and processing.Beautiful: it can simulate all kinds of wood grain, design and color on the computer.Tulsipur,In addition, there are impact resistance, anti-static, anti environmental pollution, anti sunlight, anti smoke, easy installation, easy maintenance, etc.In order to better prevent excessive water from penetrating into the inner layer of wood floor, when selecting floor cleaner, reduce excessive water as much as possible and dry the mop.In addition, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Don&#;t rush to choose the wood floor coated with light wax, and dry it naturally at night.Advantages: high wear resistance, good reliability, moisture-proof good management methods, rich and colorful color and pattern design types, and large price range.

SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.Strengthen the floor color, rich patterns, fully meet the needs of personalized design, with many varieties and fashionable colors, which can simulate various natural or artificial patterns.The decorative layer of laminate floor is generally imitated by computer, which can imitate wood patterns of various materials, or stone to make unique patterns that are not available in nature.First, the price is cheap, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second,HaukipudasFloor leather brand, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leathertotal cost, Moisture proof, no deformation in case of water, and can be used in kitchen, basement, etcHigh concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.The density of laminate floor substrate (high density fiberboard) shall be .-. g / cm, Sticker method: stick the same wood grain paper on the front and back of the board.The reinforced composite floor with good base material will give off a fresh wooden smell. The composite floor with weak base material will produce a strong pungent smell. The author randomly picked up two wooden floors and put them in front of his nose. The pungent smell from one wooden floor made the author frown immediately. Customers may wish to smell the floor closely when purchasing do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.Respect for customers, and do not buy inferior floors.Is the home floor paved with solid wood or structurally reinforced floor?Haukipudas, Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air,HaukipudasDoes laminate need maintenance, choose the dark floor. Select the number of wear-resistant revolutions In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?

The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.Four look at the brandKuusamo,The high-grade laminate flooring has high texture definition and more realistic designs and colors. Even the wood grain scabs and texture details are comparable to those of real wood. Moreover, the printing of low-quality wood flooring is stiff, rough and blurred. Users can touch the surface of wood flooring with their hands. Whether it is wood grain or tactile laminate flooring, it overturns the plane effect of ordinary flooring and has a stronger three-dimensional sense.The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.Frissin,KuusamoFloor leather paving video,Finally heat conduction is fast.Wear resistance: generally, it is about ~ times that of coated wood floor.Then look at the quality

WPC wood flooring is amazing in touch.It&#;s thick, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor, you will feel that it has been buffered.The thickness of the floor has good thermal insulation, so the floor will remain warm in the cold season.SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets, showers, hospitals, medical management centers, rehabilitation hospitals,KuusamoLaminate flooring and solid wood composite which is good, colleges and universities, which are very popular in China in recent years.Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and the grip strength of the nail is insufficient.Bones are easy to loosen, and people will make a sound when stepping on them.Analysis projectLaminate flooring has rich colors and patterns, which fully meet the needs of personalized design. There are many varieties of designs and colors, and the designs and colors are fashionable. It can simulate all kinds of natural or man-made patterns.The decorative layer of laminate floor is generally imitated by computer, which can simulate the wood patterns of all kinds of materials, and even imitate stone and create unique patterns that are not found in nature.sound insulationSome people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusion

SPC floor is an excellent raw material with the advantages of wear resistance, durability, low carbon and environmental protection.It is widely used in various indoor places.Including diagnosis and treatment, colleges and universities, culture and education, kindergartens, business services, etc.The shadow of SPC floor can be seen.technological innovation,KuusamoComposite wood floor,The laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time, it can be produced on a large scale, and the relative cost performance is high.Due to the different base materials, the price difference is obvious, and there is more room for customers to choose, which is suitable for people at all levels. Technical floor repair wax. Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.Kuusamo, Pay attention to the size.Some people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion.Three look service

In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition,LempaalaHow much is the price of laminate flooring? One square meter, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, it means that it contains a lot of formaldehyde. Be careful when choosing, and you&#;d better not buy it;Lempaala, High cost performance. Produce gene mutation effect.Sannar,Four look at the brand From the surface coating, there are aluminum oxide, melamine and piano paint.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.

Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, the building height can be improved.In addition, due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?Eleventh, the classification is diverse;In addition, there are impact resistance, anti-static, anti sunlight, anti smoke, easy installation, easy maintenance, etc.how much,Generally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, and then nailed with lath on it. After planing, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful,LempaalaMethod for waxing wood floor, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified, both simple and elegant.On the basis of uniform color or reasonable interweaving,LempaalaHow about laminate flooring, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leatherFinally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally, such problems rarely occur.How to deal with cracks in wooden floors.The core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.

Use place of SPC floor: because of its thin thickness, many colors complete styles and low-carbon environmental protection performance, hospitals it can be widely used in kindergartens, offices, office buildings, shopping malls, homes, KTV and other public places. Ecological and environmental protection.plan, Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.Second, mild to moderate scratches.Shop edit voiceLempaala,Some people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion. Ultra light and ultra-thinThose who need sound insulation should choose WPC instead of SPC vinyl flooring.WPC is excellent in this kind of insulation.Its thickness enables it to absorb sound.For this reason, it won&#;t make any sound when you walk on it.If you want to walk on the SPC floor, you will definitely make a walking sound.

Remove spots and stains with special floor cleaner.Do not clean with items with damaging properties, nylon friction pads and bleaching powder. Water resistanceNovi Pazar,Grapefruit: better texture than oak. From the characteristics of the floor, it is divided into crystal surface, relief surface, latch, silent, waterproof and so on.Tammun, I like to choose soft floor leather After days maggots appeared on the floor.This problem is because the floor contains a lot of impurities.Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusion

The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, use mild neutral detergent and wash with warm water in time to avoid the corrosion of alkaline water and soapy water on the ground, and do not wipe the ground with gasoline or other high-temperature liquids.When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses.Economic management,Laminate flooring is suitable for meeting rooms, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack,Novi PazarUse of floor leather, rot, skin clip, dead joint, moth eaten, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.Applicable part editing voiceFifth, smell with your nose is not protected by the environment.

Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, especially FSC certified plates,Novi PazarWaterproof material, have strict restrictions on wood species, so wood base materials are better.Energy costs, Mild warm color flooring is strongly recommended for homes for the elderly and children.Mild and warm colors can make people comfortable and cheerful, so choose such a floor suitable for the elderly and children.Elm: the texture is exaggerated, showing a gradual shrinking trend in the market.Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Novi Pazar, Sticker method: stick the same wood grain paper on the front and back of the board.The application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China,Novi PazarWhich is better, solid wood or laminate, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,Customized delivery time up to days.However SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times.The quality of laminate flooring can also be distinguished by some methods:

Structure: artificial surface material, wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.The color is gorgeous, the texture is clear, and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful, and the indoor formaldehyde meets the national industry standard.agent,Fourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design? Easy to clean: medical treatment is simple, bright as a new mouth, no stains, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, without excessive vitality maintenance.According to statistics the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring. Fire protection fire rating B, second only to stone.

The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.Quality Assurance, but usually ignore the quality of wooden keel ceiling (according to the main purpose basic manual.Many customers pay great attention to their own quality when laying wooden floors, there are ceiling keel and decoration partition main keel).If the water content of the wooden keel ceiling is too high or the wood itself is not deinsectized, potential safety hazards will be planted in the future.If you master the structure of the two floors, you can clearly know which floor releases a lot of formaldehyde.Then look at the qualityPietarsaari, The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.SPC floor is an excellent raw material with the advantages of wear resistance, durability, low carbon and environmental protection.It is widely used in various indoor places.Including diagnosis and treatment, sports culture, colleges and universities,PietarsaariHow about the wooden floor, culture and education, kindergartens, offices, etc.The shadow of SPC floor can be seen.Finally, look at the price

Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers. About solid wood composite floor.Sibbo,Second the price is high and the cost performance is not high. Compared with the reinforced composite floor and double-layer composite floor, the price is more expensive; Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer.Ostrava,Structure: it is made of pure solid wood from inside to outside, which is often made of pine, fir and other softwood.Four look at the brandStructure: artificial surface material, artificial basic, wood slag plus strong glue, it gets rid of the defect of poor wood reliability.

High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly, and the price is much lower than that of solid wood flooring. The internal humidity can not be very high to maintain the dryness and smoothness of the floor. The daily cleaning can be wiped with a dry cotton mop: if it is difficult to remove dirt, it should be wiped with a neutral cleaning organic solvent and then wiped with a dry cotton mop. Do not wipe with acid, alkaline solvent or vehicle gasoline and other solvents.Mute, that is, the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.Welcome calls ,Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring?Ground lacquer cloth green Easy to clean: medical treatment is simple, bright as a new mouth, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, without excessive vitality maintenance.According to statistics, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone,SibboFloor thickness,SibboCommon wood floor, ceramic tile, terrazzo, ice cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:Safety and health, Select substrate density Ecological environment protection the patent of the utility model has the advantages of being conducive to installation and maintenance,SibboPlastic floor leather, and prevents the defects of strengthening the composite floor, such as high formaldehyde content standard, astringent upper feet and so on.Defects: small blisters can not be repaired after damage, and the upper foot is poor.SibboIn order to better prevent excessive water from penetrating into the inner layer of wood floor, when selecting floor cleaner, reduce excessive water as much as possible and dry the mop.In addition, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Don&#;t rush to choose the wood floor coated with light wax, and dry it naturally at night. High cost performanceFifth, smell with your nose is not protected by the environment.

First, the price is cheap, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leather Daily maintenance does not need waxing. It can be wiped with towel or wet mop. It is widely used in indoor families, hospitals, studies, office buildings, factories, public places,PomorieFloor glue waterproof, supermarkets,PomorieWhat’s the stickiness of floor leather, businesses, gymnasiums and other places.SPC floor is mainly composed of a certain proportion of calcium powder and PVC stabilizer to form a composite floor paving material.It is a new material invented in response to national emission reduction, hard SPC indoor floor.SPC floor takes calcium powder as the main raw material. After plasticizing and extruding sheet, four roll calendering hot compress color film decorative layer and wear-resistant layer, SPC floor does not contain heavy metal formaldehyde with harmful substances. It is an environmental protection floor free of formaldehyde and a real formaldehyde floor.Pomorie,It can be seen that wood benefits mankind too much.In today&#;s more and more precious wood, the price of solid wood flooring is also higher and higher.The use of solid wood floor is a high-grade family building material consumed by everyone. Friends with sufficient internal decoration budget can consider setting solid wood floor at home.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, to create such high-quality and textured home decoration, we must not damage the floor.Chamfering rolling paint: a processing technology, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy, which is similar to the solid wood floor, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved,PomorieWooden floor mat, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.Sesvete,SPC floor is an excellent raw material with the advantages of wear resistance, durability, low carbon and environmental protection.It is widely used in various indoor places.Including diagnosis and treatment, sports culture, colleges and universities culture and education, kindergartens business services, etc.The shadow of SPC floor can be seen.In fact, it is very simple to prevent wood floor cracking. Usually, do a good job in floor maintenance and humidification of wood floor in areas with low average moisture content, which can be effectively prevented, or raise flowers and fish at home, and put buckets in the corner of the room.Generally speaking, most of the strengthened solid wood composite floors are up to standard commodities within the scope of standardized formaldehyde emission.According to relevant requirements, the formaldehyde emission of commodities in the room shall be class E, i.e. ≤ mg/l. High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly, and the price is much lower than that of solid wood flooring.

Main performance.Advantages of solid wood composite floor;Four look at the brandsuperior quality,Some people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion.Secondly the cracking of the paint surface of the wood floor has nothing to do with the wood floor itself, but the paint surface technology has nothing to do with it, or the long-term storm, the drying shrinkage of the wood floor and the cracking of paint wrinkles.The flame retardant grade is B, and the indoor formaldehyde meets the national industry standard.

The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride is an environment-friendly, such as tableware and medical infusion pipe bags. Its environmental protection does not need to be worried.SPC floor (sheet) is mainly composed of natural stone powder, which does not contain any radioactive elements after testing by national authoritative departments. It is a new green and environmental protection ground decoration material.Where is it,Fifth smell with your nose is not protected by the environment.Ninth, laser cutting is simple and easy. Do not scrape or scratch the floor surface with sharp tools.Pomorie,Secondly, choose the color you want.Defects: small blisters can not be repaired after damage

Precautions for solid wood floor installation : prevent the assembly from being too loose or too tight.From to , Chinese traditional pure solid wood flooring and new solid wood flooring, which means three-layer and double-layer solid wood, have been surging in an undercurrent.In recent years, new solid wood has maintained a high annual growth rate of more than %.Under the economic development layout from to , the upgrading of solid wood flooring category caused by new solid wood will become an important driving force to promote the consumption boom of home decorative flooring.The world financial storm has an impact on China&#;s wood flooring industry chain, but it is not rampant, only lack of confidence in the market.The operation track of the development of market economy has been advancing in the cycle system of wave soldering and wave trough. The flooring industry is depressed and it is not easy to hold it for a long time. China has a strong foreign demand market,Look at the color.SPC and WPC (waterproof core) vinyl wood flooring can be installed in any room or space.There is no need to worry about temperature fluctuations or moisture exposure.Both floors maintain maximum stability.They can resist all kinds of weather conditions.The performance levels of both floors are excellent.Port Blanca,The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture. Select machining accuracyThe flame retardant grade is B, and the indoor formaldehyde meets the national industry standard.

Sticker method: stick the same wood grain paper on the front and back of the board.What is their price level?The price of reinforced wood floor is generally between - yuan. If it is engineering plate, it will be cheaper.But the price is also related to well-known brands. If it&#;s family decoration, it&#;s better to choose a better one.Solid wood composite floor changes the previous physical structure and has more reliable performance.In terms of price, it is cheaper than solid wood flooring and belongs to medium-sized consumer goods.Pavement building decoration materials are popular materials in family decoration at this stage.Generally speaking, floors between yuan / m and yuan / m are better.The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processQuality documents,Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves,TriafnerThickened floor leather, which can really confuse the fake with the real, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.： Pungent taste if it is the floor with this taste, and you&#;d better not buy it;Common cost methods for solid wood flooring are as follows:

Secondly, choose the color you want.quality index,How to prevent cracks in wooden floors.Although there are millions of wood species there are not many suitable wood for flooring.According to GB / t national standard for solid wood flooring, the national standard for solid wood flooring in China is coniferous wood with air dry density not less than .g/cm and broad-leaved wood with air dry density not less than .g/cm The main applicable wood species under this standard are oak (oak)(there are different opinions about oak. The store will say the same. On the Internet, some say oak,TriafnerLaminate floor for toilet, some say oak, but some say oak), birch, two winged bean, muscarine, round bean, teak, elm, ash (Fraxinus mandshurica), iron sapphire, etc. if it exceeds this range, it should be carefully considered, otherwise the quality is not good or the price is unbearable. Moisture proof, no deformation in case of water, toilet basement, etc.Triafner, Wear resistance, wear resistance grade t.We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements,TriafnerHow to splice the floor leather, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture, strong adhesion, wear resistance and scratch resistance, the lines are comfortable on the feet and resist germs.

One week later, the floor sank to the bottom, and the color of the water turned yellow and black. The water contained a lot of impuritiesThe most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example,SiilinjarviWhich is better, laminate floor or wood floor, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processSiilinjarvi,A good paper cutter can be used to cut at will. In addition, it can be composed of raw materials with different colors. It is especially suitable for floor tile mosaic ground. It can be composed and matched at will. It makes full use of the intelligence of interior designers to achieve the most ideal practical effect of decoration design;It is enough to turn your ground into handicrafts, and your life and home into a temple of plastic art, which has the advantage of environmental protection.Caseres, more astringent in case of water, not easy to fallDon&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing. Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.

Fifth, smell with your nose is not protected by the environment. SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well, and the upper feet are comfortable and happy. Fire protection, fire rating B, second only to stone.reform,The application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times.The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture. Silencing, comfortable and elastic walking feet, not easy to be injured when falling

The crystal surface is basically flat. It&#;s easy to take care of and clean up.Sales Department, Sticker method: stick the same wood grain paper on the front and back of the board.First, polish the damaged place with water abrasive paper dipped in soap liquid, and then repair the eyebrow after finishing, and then brush the paint. It must be dry for less than hours, then polish the damaged place with water abrasive paper, hospitals studies, office buildings, factories, public places, supermarkets, businesses, gymnasiums and other places.SPC floor is mainly composed of a certain proportion of calcium powder and PVC stabilizer to form a composite floor paving material.It is a new material invented in response to national emission reduction, hard SPC indoor floor.SPC floor takes calcium powder as the main raw material. After plasticizing and extruding sheet, four roll calendering hot compress color film decorative layer and wear-resistant layer, SPC floor does not contain heavy metal formaldehyde with harmful substances. It is an environmental protection floor free of formaldehyde and a real formaldehyde floor.Siilinjarvi, Super wear resistanceAgain, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).First, the price is cheap, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth it has the advantages of simple installation,SiilinjarviWhat kind of floor leather to buy, convenient use, time-saving labor-saving and labor-saving.Disadvantages of floor leather

The real wood floor is processed with a whole plate, with natural texture, so the cut texture is not commensurate with the surface texture.The crystal surface is basically flat. It&#;s easy to take care of and clean up.Ikhtiman,Small blisters cannot be repaired after they are destroyed.The surface texture of solid wood floor is clear and natural, there will be some hidden dangers if the crack passes through the texture.Samarinda,Only ~ mm thick.Use place of SPC floor: because of its thin thickness, many colors, complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, hospitals, offices, office buildings, shopping malls, homes, KTV and other public places. Ecological and environmental protection.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in ,IkhtimanSPC flooring factory, the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.

Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear.Compared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high, it still exists.Sixth, his specifications and dimensions are also related to his total price.How much does it cost?, Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etc About strengthening the floor.Third, it is flame retardant, but it can&#;t be burned.

The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks.recommend,Advantages: it is warm for many days and cool in summer. Of course, the lines are comfortable on the feet and resist germs.Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments, these gases can sterilize and kill insects, stimulate spirit, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use and the selected patterns should also be different.For example, you can&#;t choose products with convex effect;In solemn places in places that need to be kept clean, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally,IkhtimanSolid wood composite floor, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Ikhtiman,IkhtimanLaminate floor for toilet,Structure: solid wood surface material, basic manual. Free formaldehyde emissionFrom the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand and there are wood grain patterns on the surface.

If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it.Prepare the floor for hardwood installationHollola,Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height.Many people think WPC floors are thick and therefore durable.OK, it&#;s a durable floor, but no more than SPC floor.Compared with WPC flooring, SPC flooring has good density.The higher density makes them resistant to damage and heavy weight.They will not be affected by the falling or moving of heavy objects.Therefore, SPC is considered to have good durability.Jawf al Maqbabah, Identify from the packageThe surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive, the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.Because the whole family decoration process will use a lot of raw materials such as solid wood plates and plywood, as well as a lot of wooden furniture, it is easy to grow insects when encountering appropriate temperature and environmental humidity, and there is no professional pest control treatment before production and processing. Anti slip, more astringent in case of water not easy to fallSampling inspection, it must be kept indoors for more than one week.The solid wood floor can be used only after it is adapted to the temperature and humidity of the room.Finally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally, such problems rarely occur.How to deal with cracks in wooden floors.The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity,HollolaHigh grade floor leather, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors,HollolaGround waterproof layer, such as the accumulation of time, the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, service and so on.

Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the moisture and moisture outside the floor are not easy to invade and the formaldehyde inside is not easy to release, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area, it is inconvenient to leave expansion joints and compression strips, it can prevent floor arching and reduce floor contraction joints.Bidding, There are standard, wide plate and narrow plate in terms of specificationsFirst, slight scratches.The water resistance is reflected by the water absorption thickness expansion index. If the index value is high,HollolaHow did you buy the floor leather, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor only moisture-proof floor, no waterproof wooden floor.Hollola,Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging.Wear resistance: generally, it is about ~ times that of coated wood floor.

Look at the substrate, and wood has been used since to years. However, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.It is not easy to deform and crack, and the dry shrinkage expansion system is very small. It has a good ability to adjust indoor temperature and humidity. The surface layer can show the natural wood grain of wood. The pavement is simple and has a wide range of application.The price is higher than composite flooring and lower than solid wood flooring.It is suitable for installing geothermal heating room.Generally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, and then nailed with lath on it. After planing, paint and wax can make the room elegant, extraordinary, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified, both simple and elegant.On the basis of uniform color or reasonable interweaving, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leatherplanService is not only related to the guarantee of product quality, warping and cracking of floor products appear soon after installation but also the performance of corporate image.Some deformation, many of which are caused by improper installation.Therefore, whether the service is professional or not also affects the performance of products. Dust-free installation is popular in floor installation. Dust pollution in home decoration can not be underestimated. For example, in floor installation engineering, sawdust and dust will inevitably appear and float in the air, and its harm is also long-term and serious.People who move into new houses often suffer from a strange disease of 'new house syndrome'. For example, when they get up every morning, they feel suffocated, nausea, and even dizzy;Easy to catch a cold;I often feel uncomfortable in my throat, poor breathing, dizziness and fatigue after a long time.This is because the respiratory tract is infected, and the biggest inducement is the invasion of dust suspended in the air for a long time.In order to avoid dust pollution, it is best to choose dust-free installation. It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:Chamfering rolling paint: a processing technology, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, which is similar to the solid wood floor, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.

WPC wood flooring is amazing in touch.It&#;s thick, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor, so the floor will remain warm in the cold season.market, About solid wood composite floor.The significance of brand is not only the popularity of the enterprise.A mature and successful brand is not strong and well-known in the end, but forms a solid psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers,RadnevoLaminate and composite wood flooring, which is bred in the minds of consumers by many factors, such as the accumulation of time, the actual actions of enterprises, the continuous improvement of products and services and so on.Enterprise brand is the commitment and attitude of enterprises and the guarantee of consumers.Therefore, when choosing products, consumers had better choose big brands in order to obtain better quality and service assurance.Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusionRadnevo, choose the brand you need (i.e. grade);The laminate floor is composed of wear-resistant layer pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time, it can be produced on a large scale, and the relative cost performance is high.Due to the different base materials, the price difference is obvious, and there is more room for customers to choose, which is suitable for people at all levels.One of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.

If the new floor is to be sent to a room equipped with large equipment,TorneoWall waterproofing, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape. Smell: whether the product has a chemical smell that irritates people. The big smell is likely to be that the limit of harmful substances exceeds the standard or the printing layer on the surface of floor leather releases toxic gas.Torneo,Tactile effect: when people contact with wood, the temperature is close in four seasons. When walking on the wood floor, the hardness is moderate and the elasticity is rich. Wood gives people a good sense of touch.Laminate flooring has rich colors and patterns, which fully meet the needs of personalized design. There are many varieties of designs and colors, and the designs and colors are fashionable. It can simulate all kinds of natural or man-made patterns.The decorative layer of laminate floor is generally imitated by computer,TorneoSticking method of floor leather, which can simulate the wood patterns of all kinds of materials, and even imitate stone and create unique patterns that are not found in nature.Gomez-Palacio, Common floor types:The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor.Finally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally such problems rarely occur.How to deal with cracks in wooden floors.

Only ~ mm thick.Many customers pay great attention to their own quality when laying wooden floors, but usually ignore the quality of wooden keel ceiling (according to the main purpose, there are ceiling keel and decoration partition main keel).If the water content of the wooden keel ceiling is too high or the wood itself is not deinsectized, potential safety hazards will be planted in the future.If you master the structure of the two floors, you can clearly know which floor releases a lot of formaldehyde. Identify from the packageProduct line, Wear resistance, wear resistance grade t. Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used) and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.

When laying wooden floor, pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, choose the brand you need (i.e. grade);technical service, High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children. All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification.SPC floor is an excellent raw material with the advantages of wear resistance, durability, low carbon and environmental protection.It is widely used in various indoor places.Including diagnosis and treatment, sports culture, colleges and universities, culture and education, kindergartens, business services offices, etc.The shadow of SPC floor can be seen.Torneo,Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusionIn order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted, more astringent in case of water

SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation. In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.Koslodui,Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments, these gases can sterilize and kill insects, stimulate spirit, calm nerves and produce health care effects on human health.In addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good,KosloduiSPC floor laying, and the wood texture and comfortable feet of the solid wood floor are preserved.Cascais,Third, look.If the cracks on the surface of the wooden floor are not serious,KosloduiFloor types are mainly divided into several types, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?

In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long time, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First pursue foreign goodsHigh price performance price ratio: because of its unique structural connection, the regulations on wood are not too high, and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring.Finally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally such problems rarely occur.How to deal with cracks in wooden floors.Quality assurance,People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.Service is not only related to the guarantee of product quality, but also the performance of corporate image.Some deformation warping and cracking of floor products appear soon after installation, many of which are caused by improper installation.Therefore, whether the service is professional or not also affects the performance of products. Dust-free installation is popular in floor installation. Dust pollution in home decoration can not be underestimated. For example, in floor installation engineering, sawdust and dust will inevitably appear and float in the air, and its harm is also long-term and serious.People who move into new houses often suffer from a strange disease of 'new house syndrome'. For example, when they get up every morning they feel suffocated, nausea, and even dizzy;Easy to catch a cold;I often feel uncomfortable in my throat, poor breathing, and the biggest inducement is the invasion of dust suspended in the air for a long time.In order to avoid dust pollution, it is best to choose dust-free installation.

great  |   broadcast  |   comment   | Favorites

After - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth, whether the tenon and groove bite is appropriate, carefully check the assembly height difference and gap between floors.The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.Radomir,Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments these gases can sterilize and kill insects, calm nerves and produce health care effects on human health.When using liquid spray waxing stimulate spirit,RadomirHow much is the wooden floor per square meter, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.Kyaukse, Anti slip, more astringent in case of water, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system. Beautiful and diverse colors, seamless splicing construction, cracks and mildew. Generally Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly the wood board shall be processed into the length and width coordinated with the room size according to the room size, and the floor shall be cleaned before laying.When laying, draw the center point and vertical and horizontal vertical lines of the room, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate.The quality of the solid wood composite board made of high-grade flowers, plants and trees can also be divided into good and bad. Therefore, it is best to select the solid wood composite floor guaranteed by a well-known brand, which can not only ensure the quality, but also deal with the problems of the store.： I can&#;t tell the taste. The domestic price of this floor is more than yuan;Excellent quality,Small blisters can not be repaired after damage, and the upper foot is weak. What does the real wood floor look like? Stable quality and not easy to damage: the solid wood composite floor plate adopts double plate composite type,RadomirBamboo and wood composite floor, and the wood chemical fiber is bent into a network structure and laminated. Various thermal stresses of wood are integrated into multiple plates to ensure the flatness and stability of the wood floor and preserve the beauty of the solid wood floor

Headache, dizziness, fatigue, nausea, vomiting, nausea, chest tightness, shortness of breath, eye pain, sore throat, stomach pain, palpitation, shortness of breath, insomnia, weight loss, memory loss, etc.Long term inhalation by pregnant mothers is likely to cause abnormal fetuses and even death.Quality improvement,Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor, which has the advantage of environmental protection.The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm. Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort,RadomirHow to lay wooden floor when the ground is uneven, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.Radomir,UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[] Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings. Select the number of wear-resistant revolutions

Free formaldehyde emissionAt the level of home decoration effect, there are many joints on the paved small floor, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed,The maintenance of SPC floor is very convenient. If the floor is dirty, you can wipe it with a mop.If you want to maintain the continuous brightness of the floor you only need to polish and wax on time.Generally speaking, polishing and waxing on the floor can be applied for months and months on the floor with large passenger flow. Its maintenance frequency is much less than that of other floors.In the decoration of new houses, some roads in the home are fully covered with wooden floors,YlojarviWhat is floor leather, but over time the wooden floors are very easy to deform, curl edges and are not waterproof. Now such raw materials are particularly popular abroad. The real indoor formaldehyde is not deformed. No wonder it is popular ~. Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time it has special advantages in the reconstruction of old buildings.Forsythin,Common types: three-layer solid wood composite floor, double-layer solid wood composite floor,YlojarviWood floor or floor tile, new solid wood composite board. Fire protection, fire rating B, second only to stoneThrough the investigation, the following conclusions are drawn:

Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves, which can really confuse the fake with the real, without keel. As long as the ground is flat, the building height can be improved.In addition, due to the simple installation regulations the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection, health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?Affordable price,When laying wooden floor, pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First,YlojarviFloor leather construction, choose the brand you need (i.e. grade);From the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.

The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.Information recommendation,When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.Many customers pay great attention to their own quality when laying wooden floors, but usually ignore the quality of wooden keel ceiling (according to the main purpose, there are ceiling keel and decoration partition main keel).If the water content of the wooden keel ceiling is too high or the wood itself is not deinsectized, potential safety hazards will be planted in the future.If you master the structure of the two floors, you can clearly know which floor releases a lot of formaldehyde. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?Ylojarvi,Formaldehyde damage.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price.The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.

Headache, dizziness, fatigue, nausea, vomiting, nausea, chest tightness, shortness of breath, eye pain, sore throat, stomach pain, palpitation, shortness of breath, insomnia, weight loss, memory loss, autonomic nerve obstruction, etc.Long term inhalation by pregnant mothers is likely to cause abnormal fetuses and even death. easy careIdensalmi,Poor decorative effect: the surface of the laminate floor is a wear-resistant layer and decorative layer, which are all printed by bionic technology. Compared with natural solid wood, the overall paving effect is distorted and the visual effect is harder. Main performance.Welkom,IdensalmiSPC flooring market,Second, soak in water.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price.SPC floor is an excellent raw material with the advantages of wear resistance, durability, sports culture, colleges and universities, culture and education, kindergartens, business services, offices, etc.The shadow of SPC floor can be seen.

Anti slip, more astringent in case of water, not easy to fallDifferent colored floors can create different styles of popular furniture, high-grade calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Install basketball wood flooring manufacturer&#;s flooring?Sports wood flooring installation basketball wood flooring manufacturers now have many unprofessional basketball wood flooring manufacturers.In order to reduce costs, they will not hesitate to damage the interests of customers, reduce costs,IdensalmiHow to choose laminate flooring, and cause the floor to slip.The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processmanufacturerFourth, wear resistance means that it is not easy to scratch with artifact.Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, it is cheap and stable. The four sides are made into V-grooves, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.Color film layer: various decorative layers of wood grain, stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.

Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).agent, Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology,IdensalmiBrand of laminate flooring, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard.IdensalmiWhen laying wooden floor, choose the brand you need (i.e. grade);Characteristics of fake and shoddy laminate flooring Defects.

The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, the number of wear-resistant revolutions is usually more than revolutions, while in public places, it is usually more than revolutions. You can buy it on demand.Foot feelKemi,Different colored floors can create different styles of popular furniture high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price.Boma, I like to choose soft floor leatherThe flame retardant grade is B, and the indoor formaldehyde is higher than the national standard. waterproof, PVC has no affinity with water, SPC flooring will not be deformed due to moisture, so it is a good choice for flooring.

In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance, moisture resistance, small water absorption, simple construction, convenient maintenance and low price, it also adds the advantages of comfortable foot feeling, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength,KemiLaminate flooring brand, foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, and the total thickness is mm (household) ~ mm (public building).Considering the Japanese style of the family the width is mm ~ mm, plus the all-round shops in the living room and restaurant, the color needs to be light color, light yellow, moderate stability, and the preliminary positioning of white oak. The reinforced composite wood floor has the texture of natural wood floor at the same time, and the price is reasonable, which is favored by the majority of consumers. However many consumers are worried that formaldehyde will be stored in the production and processing process of composite floorIn, it is harmful to human body. How about using reinforced composite wood flooring? What are the advantages and disadvantages of reinforced composite wood flooring? Let&#;s take you to know about the relevant situation of reinforced composite wood flooring and have a look together. After days, maggots appeared on the floor.This problem is because the floor contains a lot of impurities.Welcome calls , Look at the section of the board.Molded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop.Ground lacquer cloth green

Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring?Respect for customers, Look at the section of the board.Wear resistant paper invented in the s was used on the surface of bowling alley.Because of the creation, invention and application of anti-static laminate flooring products, the domestic rate of wear-resistant paper in China has reached about %, but it still needs to be imported.The key index values for evaluating the quality of wear-resistant layer are: Anti slip, more astringent in case of water, not easy to fallKemi,The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover,KemiPrice of laminate flooring, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses.

Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor, then you may need to do a lot of work: there are some interesting surprises lurking under the old floor.When installing laminate flooring, workers must be very careful to complete qualified work.Multilayer carpets or vinyl can be difficult to move and are usually much heavier than they look!After removing the old floor, it is necessary to ensure that the floor is level and in good condition before installation can begin.Similarly, experienced hardwood flooring installation experts can solve this problem for you to ensure that the new flooring has perfect smoothness and levelness.For more convenient tips,KarhulaWhat is the general price of household floor leather, please check our hardwood flooring installation guide.Tips for preparing the house before floor installationKarhula, The construction of installation works is convenient.Direct contact with formaldehyde can cause skin allergy, pigment spots and atrophy. Inhalation of high concentration formaldehyde can cause chronic bronchitis.Nizip, Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity,KarhulaHow to clean the floor leather, good mechanical strength, good foot feeling strength comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance small water absorption, good insulation, self extinguishing, simple construction, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.What is the difference between solid wood flooring and solid wood composite flooring?SPC and WPC (waterproof core) vinyl wood flooring can be installed in any room or space.There is no need to worry about temperature fluctuations or moisture exposure.Both floors maintain maximum stability.They can resist all kinds of weather conditions.The performance levels of both floors are excellent.

Physical and mental health floor is the floor produced according to the production and manufacturing product quality standards and installation and application testing standards (double specifications), which is not easy to cause harmful substances and ensure the health and safety of residential gas.Considering the Japanese style of the family, plus the all-round shops in the living room and restaurant, the color needs to be light color,KarhulaLaminate flooring and composite wood flooring, light yellow, moderate stability, and the preliminary positioning of white oak. The reinforced composite wood floor has the texture of natural wood floor at the same time, and the price is reasonable, which is favored by the majority of consumers. However, many consumers are worried that formaldehyde will be stored in the production and processing process of composite floorIn, it is harmful to human body. How about using reinforced composite wood flooring? What are the advantages and disadvantages of reinforced composite wood flooring? Let&#;s take you to know about the relevant situation of reinforced composite wood flooring and have a look together. Prevent the floor from being deformed by cooking utensils.Installation conditions,Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, so wood base materials are better.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster have strict restrictions on wood species, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell. Whether to renovate the board.

If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use.High quality and low price,When using liquid spray waxing, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.Log color floor looks more natural and has an elegant feeling. It is a common floor color in home decoration.Ash wood floor is closer to the natural color, a variety of furniture styles, warm and natural, and can also improve the indoor brightness.Lacquer cloth green ( piece)Karhula, Green environmental protection： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level. days later, maggots grow on the floor. This problem occurs because the floor contains a lot of impurities.

Select machining accuracy easy careSvilengrad, there are not many suitable wood for flooring.According to GB / t national standard for solid wood flooring, the national standard for solid wood flooring in China is coniferous wood with air dry density not less than .g/cm and broad-leaved wood with air dry density not less than .g/cm The main applicable wood species under this standard are oak (oak)(there are different opinions about oak. The store will say the same. On the Internet, some say oak, some say oak, but some say oak), birch, two winged bean,SvilengradWholesale of floor leather manufacturers, muscarine, round bean, elm, ash (Fraxinus mandshurica), iron sapphire, etc. if it exceeds this range, it should be carefully considered,SvilengradIs formaldehyde of aggrandizement floor serious, otherwise the quality is not good or the price is unbearable.In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.Guihu, Moisture proof, no deformation in case of water, toilet, basement, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;It is roughly divided into common solid wood flooring, reinforced composite wood flooring, solid wood composite flooring, bamboo flooring, high corrosion-resistant flooring, plastic flooring, antistatic flooring and outdoor stalls according to raw materials.According to the level of ecological environment protection, it is divided into European standard E and E floor, Japanese standard - F star floor regulated by JAS star, etc.E, which is often referred to by Chinese manufacturers, is the name of Chinese specifications, but there is no name of E in European standards.

： Pungent taste if it is the floor with this taste, it means that it contains a lot of formaldehyde. Be careful when choosing, and you&#;d better not buy it;Regulation effect: wood has certain moisture absorption performance. After indoor decoration with dry wood, the air humidity is too high,SvilengradLaminate flooring and composite wood flooring, and the wood absorbs part of the moisture from the air. On the contrary, it releases the moisture which has a certain regulation effect on the indoor relative humidity and gives people a comfortable environment.According to the measurement, in the houses decorated with wood, the temperature is low in summer and warm in winter. Select substrate densityInstallation material list,Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price. Silencing, comfortable and elastic walking feet, not easy to be injured when fallingThe floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , the national standard of laminate flooring has been implemented and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring.

Products of well-known brand manufacturers with business history are preferredSales Department, High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly, and the price is much lower than that of solid wood flooring.In terms of price, other entry-level products include muscarine, birch, elm, etc. with low price; iron cycadwood, two winged bean, ash, etc., have high cost performance; oak, teak, etc., have high price performance.First, look at environmental protectionSvilengrad, From the surface coating, there are aluminum oxide, melamine and piano paint.If you want to polish a lot of things, tarpaulin and tape.Hardwood floors often need to be polished during installation.Related questions edit voice