Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used,Old ZagolaEnvironmental protection of solid wood composite floor,Old ZagolaSPC floor specification, the quality index is unstable, and the formaldehyde seriously exceeds the standard. From the surface coating, there are aluminum oxide, melamine and piano paint.Old Zagola,Muscovy longan: the texture is fine but the toughness is poor. Some samples in the store have small cracks, but it still does not affect the use.Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor, which has the advantage of environmental protection.Faro Airport,From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.The density of laminate floor substrate (high density fiberboard) shall be .-. g / cm and it is not appropriate to have too low or too high density. Produce gene mutation effect.

Feature editing voiceNinth, laser cutting is simple and easy.When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact,Old ZagolaPrice of waterproof board, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example, the minimum speed of national composite floor is rpm.Therefore, Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, flame retardant, non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processSecondly, the cracking of the paint surface of the wood floor has nothing to do with the wood floor itself, but the paint surface technology has nothing to do with it, or the long-term storm, the drying shrinkage of the wood floor and the cracking of paint wrinkles.

From the surface coating, there are aluminum oxide, melamine and piano paint.Work courses,Advantages of solid wood composite floor:Eleventh, the classification is diverse;The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Old Zagola,The thickness of SPC floor is mainly selected according to personal needs.Of course, the floor thickness affects the floor price and the service life will be different, the better. We need to select according to whether the installation will affect the door closing or other s;Whether the overall effect after installation will be uncoordinated;Material budget and other aspects to select the most appropriate floor thickness.The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.The flame retardant grade is B