However,DelcevoCan SPC floor be used outdoors, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor, because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor, it can realize glue free, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example, in case of water immersion and other accidents, the floor can be quickly removed and reinstalled.If you live for many years and want to move away, you can also remove the floor and reinstall it in a new home. For the floors of some precious tree species such as teak, this is very important, because the logs are more and more precious, and the floor can maintain and increase its value.Finally, heat conduction is fast.Delcevo,When choosing laminate flooring, we should first see whether it is produced by regular manufacturers and whether there is an authoritative certification report;Secondly open the moisture-proof layer of the floor, expose the substrate, smell the pungent smell, and the formaldehyde content is likely to exceed the standard.Usually,DelcevoLaminate picture, the methods for measuring formaldehyde emission include perforation extraction method, air dryer method and bellows method.How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving, the indoor ground shall be treated first.Skive,Small blisters can not be repaired after damage, and the upper foot is weak.The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.Second soak in water.
For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!In daily life if you accidentally drop the lifting objects and appliances on the wooden floor, or there are small stones on the sole of your shoes walking on the wooden floor, the surface of the wooden floor will be damaged to varying degrees and the paint on the floor surface will be damaged. The owners of residential areas must take precautions,It is recommended that customers place a blanket anti-wear layer in the outdoor entrance and room: the anti-wear layer is made of surface paper pre impregnated melamine epoxy resin and metal composite, such as wear resistance, smoke burning resistance, environmental pollution resistance, corrosion resistance and waterproof. It also happens that this feature constitutes many advantages of strengthening the anti-static floor different from the lacquer wood floor which not only meets the requirements of contemporary people for home decoration, but also reasonably saves cleaning time,Convenient customers quickly enjoy a high sense of rhythm of daily life.Main differences between WPC and SPC flooringThe cost is reasonable,The cross-section of the floor is rubbed with a file to generate heat in the cross-section, and formaldehyde is fully volatilized (formaldehyde is accelerated at more than degrees, and you can smell the pungent smell at the same time). At this time, generally you can smell three different levels of smell Ultra light and ultra-thinMore accurately, SPC floors with obvious pungent smell should not be environmentally friendly.SPC rural grass-roots raw materials themselves do not contain indoor formaldehyde. The qualified SPC floor should be . There is no formaldehyde release. It is likely to have the taste of air fragrance and modifier. It is not easy to cause harm to everyones body and make people feel uncomfortable.Although the installation method of SPC latch floor is the same as that of wood floor, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey, the SPC lock floor of different brands will have edge warping, arching, large expansion joints, and even lock fracture after paving on individual sites.
High cost performanceresources,The fire safety performance of SPC floor and homogeneous transparent waterproof coiled material floor shall meet the national industry standard gb-b, only second to marble.The reinforced composite floor with good base material will give off a fresh wooden smell. The composite floor with weak base material will produce a strong pungent smell. The author randomly picked up two wooden floors and put them in front of his nose. The pungent smell from one wooden floor made the author frown immediately. Customers may wish to smell the floor closely when purchasing, and do not buy inferior floors.In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.Delcevo,If you want to polish a lot of things, you can minimize the spread of dust in the whole house by closing the door and covering it with plastic cloth, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced? From the characteristics of the floor it is divided into crystal surface, latch, silent, waterproof and so on.