The solid wood composite floor made of melamine formaldehyde resin has certain formaldehyde content standards, and the environmental protection requirements must comply with the national standard GB-, that is, the national standard GB- requires ≤ mg/l.Four look at the brandBugadoGrapefruit: better texture than oak.The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Karuri,Fourth,BugadoGarden wood floor, high ductility and strong impact resistance.Second, the time of birth.The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm.

When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.Floor agent (floor franchise) trap : policy support. Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, choose the dark floor.Discount,In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance,BugadoThere are several types of SPC floor buckle,BugadoFloor antiskid, moisture resistance, small water absorption, simple construction, convenient maintenance and low price, it also adds the advantages of comfortable foot feeling, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, good mechanical strength, good foot feeling strength, foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m the width is mm ~ mm, raw material parts, growth and development parts and lower sawing points, it will inevitably cause inconsistent color difference. SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor.

Service is not only related to the guarantee of product quality, but also the performance of corporate image.Some deformation, warping and cracking of floor products appear soon after installation, whether the service is professional or not also affects the performance of products. Dust-free installation is popular in floor installation. Dust pollution in home decoration can not be underestimated. For example, in floor installation engineering, sawdust and dust will inevitably appear and float in the air, and its harm is also long-term and serious.People who move into new houses often suffer from a strange disease of 'new house syndrome'. For example when they get up every morning, they feel suffocated, and even dizzy;Easy to catch a cold;I often feel uncomfortable in my throat, poor breathing, dizziness and fatigue after a long time.This is because the respiratory tract is infected, it is best to choose dust-free installation.Free consultation, waterproof, PVC has no affinity with water, and will not mildew due to high humidity.In southern areas with more rainy seasons, SPC flooring will not be deformed due to moisture, so it is a good choice for flooring. Select the number of wear-resistant revolutions.The second: I can&#;t tell the taste. The domestic price of this floor is more than yuan;Bugado,For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell but a bad one has a strong pungent smell! About solid wood composite floor.When choosing wood flooring in , customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In , all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.

Second, sticky man is thin.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.San joda Madeira,Birch: good toughness, most low-grade materials.Wood plastic flooring manufacturer.jpgCalamba,When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses.Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring?The flame retardant grade is B, it is divided into crystal surface, relief surface, latch, silent, waterproof and so on.... the surface layer of SPC floor has been solved by pur Crystal Shield and has good air permeability. Even if barefoot steps on it, it will not feel cold and very comfortable. In addition, the rebound technical layer has stronger ductility. Even if it is constantly bent for degrees, it is OK. There is no need to worry about falling pain. It is especially suitable for homes with old children.SPC floor will be 'astringent' when it meets water, that is, the friction will increase, and the ground anti-skid characteristics are very good.Its wear resistance is also very high, that is, the use of steel wire brush to rub on the floor, and the service life can reach more than years.In addition, SPC floor is very lightweight, with a net weight of only -kg per square meter, which is % of the general floor material, which can reasonably save the height width ratio of indoor space and alleviate the load of road surface.No swelling, no deformation, not to mention the maintenance in the middle and later stage. There is a sound insulation and noise reduction layer at the bottom of SPC floor and the actual effect of sound insulation and noise reduction is also very good.Many people will choose to decorate with wooden floor, which is beautiful, practical and beautiful.Do you know how wood floors are classified and why?Now let&#;s introduce the three categories of wood flooring.Therefore, with solid wood texture, latch structure and paint finish, the service life of solid wood floor can reach decades. There is no problem at all, and it can even be passed down from generation to generation. During application, pay attention to prevent the floor from being scratched by hard blocks such as excessive heavy metal needles, laminated glass tiles and shoe nails;When moving furniture, do not move back and forth on the floor;Do not touch the floor with fire or immediately place an amplified power electric water heater on the floor;Do not place strong alkali and strong acid chemicals on the floor;It must not be immersed in water for a long time.technological innovation,Finally, heat conduction is fast. Remove spots and stains with special floor cleaner.Do not clean with items with damaging properties, such as metal tools, choose the sexual or shallow floor as much as possible,San joda MadeiraWhat is laminate flooring, and if you expect calm air choose the dark floor.

First, the wear resistance is not as thick as that of reinforced composite floor and double-layer composite floor;query,First, the price is cheap, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation,San joda MadeiraEnvironmental protection floor leather, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leatherBecause the whole family decoration process will use a lot of raw materials such as solid wood plates and plywood, as well as a lot of wooden furniture, it is easy to grow insects when encountering appropriate temperature and environmental humidity, and there is no professional pest control treatment before production and processing.Sixth, his specifications and dimensions are also related to his total price.San joda Madeira, Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde lead and benzene, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material heavy metals and carcinogens, which is of great significance to protect our earth&#;s natural resources and ecological environment.Generally,San joda MadeiraWhat color do wooden floors have, I don&#;t think this is its advantage!what?After all, the gap of cm is very small.Polymer base material layer: a composite plate made of stone powder and thermoplastic polymer materials after stirring evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics. Therefore, this floor has good strength and toughness. Ecological environmental protection;

Mute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.Two layers of solid wood composite floor.Luer,First, slight scratches.Laminate flooring contains a certain amount of formaldehyde, which will be harmful to human body if it exceeds the index value specified by the state (mg / L). When purchasing, it is most suitable to choose products certified by the national environmental protection mark or inspection free products.Tammisaari,First, pay attention to the size of the board and try to choose a wide board with a length of cm, or a standard board with a width of cm and a thickness of cm.SPC floor is mainly made of calcium carbonate, including pur Crystal Shield transparent layer, wear-resistant layer, color film layer,LuerGeothermal floor, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor.The surface layer of SPC floor has been solved by pur Crystal Shield, with good thermal insulation performance. It will not be cold even if barefoot steps on it. It is very comfortable. Coupled with the rebound technical layer, it has good flexibility.Even if you keep bending degrees, you don&#;t have to worry about falling pain. It is especially suitable for homes with elderly and children.SPC floor will be very astringent in case of water, the sliding friction will increase, and the ground anti-skid performance will be very good.It also has high wear resistance.Even if the floor is rubbed back and forth with a steel wire brush, there will be no scratches, and the service life is more than years.Moreover, SPC floor is very light,LuerTop ten famous brands of floor heating wood flooring, with a net weight of only -kg per square meter, which is % of the raw materials of general floor. It can reasonably save the height width ratio of indoor space and reduce the bearing capacity of the floor.The SPC floor does not swell and deform, and does not need to be maintained in the middle and later stages. There is a sound insulation and noise reduction layer at the bottom, and the actual effect of sound insulation and noise reduction is also very good.There are many kinds of floors used in interior decoration. Community owners who have experience in interior decoration should know that different kinds of floors have different home decoration effects. Which kind of floor is better?Let&#;s take a look at the types of solid wood composite flooring.

Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, stone plastic flooring is becoming more and more popular in hospitals, schools, office buildings, shopping malls, supermarkets, vehicles and other places with large flow of people.It is the best way to polish and wax the solid wood floor once a month, but wipe the water and dirt clean before polishing and waxing.How to choose solid wood flooring, solid wood composite flooring and laminate flooring?SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets, showers, hospitals, kindergartens, medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.Superior quality, Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard.The surface layer of the laminate floor is a wear-resistant layer, which is composed of evenly distributed alumina, which can achieve high hardness. Scraping with a hard object as sharp as a key can only leave shallow traces.The pollution resistance, corrosion resistance compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring. Fire protection, fire rating B, second only to stone.

Select substrate densityHow much does it cost?,Some people say this method is unscientific and laminate flooring can&#;t soak in water, so as to avoid early dry crack and aging of the floor surface.Close the window when it rains so as not to wet the floor.Also pay attention to indoor ventilation,LuerHow thick is laminate floor, emit indoor moisture and maintain normal indoor temperature, which is also conducive to the service life of the floor.SPC floor is composed of thickened wear-resistant layer, UV layer, fire rating B it has the properties and characteristics of wood and plastic to ensure the strength and toughness of the floor.Let&#;s take a look at the advantages of SPC floor. Fire protection, second only to stoneLuer,Third, it is flame retardant, but it can&#;t be burned. Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, stone plastic flooring is becoming more and more popular in hospitals, schools, office buildings, shopping malls, supermarkets, vehicles and other places with large flow of people.For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer

Anti slip, not easy to fallFloor leather (also known as coiled floor), a new type of flooring material, belongs to plastic products. It is one of the indispensable floor materials for modern room decoration. It has a thickness of more than mm and a wear-resistant layer of more than . Generally, glass wire with good flatness or double primer is used.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.Advantages of floor leatherPontinia,Laminate flooring does not need waxing and painting, let alone sanding and polishing.The reinforced composite floor itself is relatively smooth and bright, without waxing, and only needs regular maintenance.The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.Armenia,In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First,PontiniaHow to choose floor leather, smell.Solid wood floor is very beneficial to physical and mental health, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor, whether it is solid wood floor, reinforced composite floor or multi-layer composite floor, if it is used at home, it can generally be used for - years depending on the use environment.The solid wood composite floor made of melamine formaldehyde resin has certain formaldehyde content standards, and the environmental protection requirements must comply with the national standard GB-, that is, the national standard GB- requires ≤ mg/l.

As the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance, impact resistance, fire resistance flame retardancy and chemical pollution resistance, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty, wipe it with a cloth stained with detergent. Simple installation and convenient construction: no wooden keel, no waterproof treatment on the ground, no complex construction process, saving installation time and cost. Fire protection, fire rating B,PontiniaWhat paint is directly applied to the old wood floor, second only to stoneTest results,Well known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, longxilu, tahilong, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, European and American brands for the pursuit of brand effect, and domestic brands for low prices.The surface color of solid wood composite floor shall be determined according to the decoration area, the dark brown floor looks simple for rooms with large area or sufficient light, and the light color floor looks spacious and bright for rooms with small area;Second, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere and the warm tone floor in the bedroom;Third, and the color of furniture can be mixed with warm tone floor.The surface color of solid wood composite floor shall be determined according to the decoration area, furniture color and overall decoration design style of the customer&#;s home. First, the dark brown floor looks simple for rooms with large area or sufficient light, and the light color floor looks spacious and bright for rooms with small area;Second, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere, and the warm tone floor in the bedroom;Third, the color of furniture can be mixed with medium color floor, and the color of furniture can be mixed with warm tone floor.

Many people think WPC floors are thick and therefore durable.OK, it&#;s a durable floor, but no more than SPC floor.Compared with WPC flooring, SPC flooring has good density.The higher density makes them resistant to damage and heavy weight.They will not be affected by the falling or moving of heavy objects.Therefore, SPC is considered to have good durability.reform,thicknessRubber: rubber with poor toughness and stability.XIII. Convenient maintenance.Pontinia,SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, showers, hospitals, kindergartens medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.advantage Keep the floor dry and clean. If there is dirt on the floor surface generally wipe it dry with a damp mop without dripping water.

Compared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring, only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high, and the formaldehyde concentration can be basically ignored, it still exists.'Advantages and disadvantages of laminate flooring'The cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃, and some irritating smell can be smelled). At this time, you can smell it. Generally, you can smell three different levels of smell:Interpretation and observation,The flame retardant grade is B and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Defects: small blisters can not be repaired after damage, and the upper foot is poor.Lacquer cloth green ( piece)

A good paper cutter can be used to cut at will. In addition, it can be composed of raw materials with different colors. It is especially suitable for floor tile mosaic ground. It can be composed and matched at will. It makes full use of the intelligence of interior designers to achieve the most ideal practical effect of decoration design;It is enough to turn your ground into handicrafts, and your life and home into a temple of plastic art, full of plastic art atmosphere.discount, A week later, the floor sinks, the water turns yellow and black,TorrellWhat brand of composite floor has good quality, and the water contains a lot of impurities.SPC floor does not use strong glue in the production process, so there is no indoor formaldehyde, benzene and other harmful substances. The real indoor formaldehyde low-carbon environmental protection floor has no damage to the body.Related questions edit voiceTorrell,The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm. Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.Laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed. The base material is made of fast-growing forest materials, which is lower than that of solid wood floor. At the same time, it can be produced on a large scale and has high cost performance.According to different substrates, the price difference is obvious, and customers have more room to choose, which is suitable for people of all levels.

Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight,PinhalNovoComposite wood floor laminate, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.The crystal surface is basically flat. It&#;s easy to take care of and clean up.PinhalNovo, After the primer is dry, brush the first finishing coat and dry it. Various surface treatments (concave convex pattern, hand grip pattern, pair pattern, mirror pattern)Palencia,SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.First, the wear resistance is not as thick as that of reinforced composite floor and double-layer composite floor;Characteristics of fake and shoddy laminate flooring

If the new floor is to be sent to a room equipped with large equipment, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape. If there are hard objects, check the ground hardness, which shall not be lower than MPa.The European solid wood composite flooring market showed a slight downward trend in the third quarter of and is still recovering in In the first quarter, only Denmark completed a slight improvement.China&#;s three-layer solid wood composite floor has a good export market under the overall downturn of the international market.More than % of Jilin&#;s materials are exported, and China&#;s solid wood composite flooring has become a fashionable material in European countries.Floor road construction is the key way of home decoration. Choosing which floors, how to build roads and how to check are the problems concerned by interior decorators.Recently, it has been found that wood flooring is gradually popular with large capacity, and customers attach great importance to quality.Nowadays, large and medium-sized flooring has the trend of replacing small and medium-sized flooring.Solid wood flooring materials are not enough, and large and medium-sized composite flooring has gradually become a new pet for home decoration.However, it must be noted that some floors are made of fake and shoddy raw materials, so I should pay attention to corner material floors when purchasing floors.how, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say, this reason.

Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.Product line,The current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small,PinhalNovoTop ten famous brands of floor heating wood flooring, especially when the temperature difference between winter and summer is too large it is very easy to have no gap to expand, resulting in arching and warping. Flatness of foundation ground.SPC floor has a variety of colors, such as blanket pattern design, etc. wood floor pattern design,Even be able to complete personalized customization.The wireframe is real, beautiful and generous. Equipped with a variety of accessories and decorative design strips, it can integrate the practical effect of beautiful and generous decorative design.Now we have VSPC flooring and another layer of processed bamboo is basically attached to SPC, which makes the floor tone milder and feel more comfortable.PinhalNovo,Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However,PinhalNovoGeothermal heating floor, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better. The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.Through the investigation, the following conclusions are drawn:

The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, and a certain number of wear-resistant revolutions corresponds to a certain content of aluminum oxide.For household floors, the number of wear-resistant revolutions is usually more than revolutions, while in public places, it is usually more than revolutions. You can buy it on demand. Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally when cleaning the floor, you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.Carnation,The structure of solid wood multilayer composite floor is divided into solid wood control panel, multilayer board and mixed glue.Because less glue is used and the materials are natural, the formaldehyde released will be less than that of reinforced composite floor.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally,CarnationFloor leather is divided into several categories, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally,CarnationTunnel waterproof board, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.the republic of korea, It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, terrazzo, ice cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level.Eleventh,CarnationWhich is better, ceramic tile or wooden floor, the classification is diverse;

If the address cannot be used temporarily, the indoor air quality and commodity circulation shall be maintained, and it shall not be covered with plastic boxes or newspapers, so as to prevent the long-term surface paint layer from becoming sticky and dull. Good quality and low price.UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[]Quality inspection report,Look at the moisture content.advantage The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.

Products of well-known brand manufacturers with business history are preferreddetails, Good fire resistanceManufacturers generally consist of four layers of raw materials, namely wear-resistant layer, decorative layer, dense plate layer and equilibrium layer.One of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.CarnationEighth, antimicrobial activity. SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well, and the upper feet are comfortable and happy.The double composite solid wood floor adopts double-layer solid wood pressing. It feels like pure natural wood. The installation and maintenance is very simple. It is suitable for floor heating, beautiful and generous, good reliability

In case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, it shall be immediately sucked away with a dry rag and allowed to be dry. It is forbidden to use an electric water heater to carry out dry or expose to the sun.The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.Estoli,Then select one or more floor waxes, which can be adjusted to the same tone as the floor.Heat the strip solid recovery wax with an electric soldering iron and fill it on the scratches on the floor. No scratches can be seen. High price performance price ratio: due to different structures,EstoliMultilayer composite floor, the regulations on wood are not too high. Raw materials can be used flexibly, and the price is much lower than that of solid wood flooring.Lozova,Stability: completely disperse the original wood mechanism, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system.Easy to clean: simple, bright as a new mouth, dust-free, very easy to clean.Fourth, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has , and the new three-layer solid wood floor has , mm.

If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor which has a great impact on the normal use.Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments, these gases can sterilize and kill insects, stimulate spirit, calm nerves and produce health care effects on human health.Generally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling and then nailed with lath on it. After planing, paint and wax can make the room elegant, extraordinary, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leatherproperty right,The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.When laying wooden floor, pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, choose the brand you need (i.e. grade); SPC floor adopts marble powder and new materials, which is more green and environment-friendly.The cost of stone plastic floor is quite low, and it can be flame retardant. It has no affinity with water and is not easy to mildew. Stone plastic floor has sound-absorbing effect, so we don&#;t have to worry about the sound of high-heeled shoes hitting the ground anymore.

We can also scrape the board with a blade.The real solid wood floor is painted with wood, white putty and paint.Scrape the surface with a blade. If it is white it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Discount, Anti skid. Compared with ordinary floor materials, the nano fiber feels more astringent when it is exposed to water and is less likely to slip. The more it meets water, the more astringent it becomes.It is suitable for families with old people and children. It is the preferred ground material in public places with high public safety requirements, such as airports, hospitals,EstoliFloor leather bugs, kindergartens, schools, etc. Flatness of foundation ground. Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, the building height can be improved.In addition due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection, health and comfort,EstoliHow much is the glue floor? One square meter, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?Estoli, Exposure to obvious sunlight, or significant increase or decrease in room temperature, will cause early embrittlement of solid wood board floor paint, which should be minimized. Veneer method: stick the wood veneer on the board surface.For example the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers. In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.

The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.Structure: it is made of pure solid wood from inside to outside, which is often made of pine, fir and other softwood.Chaneka, Look at the details.Lies are angels, details are demons.Take the product leaflet page, as an example, from copywriting, design, printing, paper to regional market consultation telephone and distribution address.If there are irregularities and inconsistencies, we should pay more attention.Visual effect: the wood has beautiful texture and various colors. It can effectively absorb ultraviolet rays harmful to human eyes, making it visually comfortable and healthy. Look at the surface of the board.Lubujana, Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.To sum up, the relief is really beautiful;If the same gram of wear-resistant paper is used the wear-resistant degree of crystal is relatively higher than that of relief;The silent foot feel is really good, but it&#;s more expensive;Waterproof and cost-effective. Not many people know its role.Main differences between WPC and SPC flooring

Super wear resistanceIn another case,ChanekaHow about composite wood floor, the scar is deep, which can be supplemented with solid recovery wax colored with paint repair pen, and then polished. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?Potential development,ChanekaCommon wood floor,What is their price level?The price of reinforced wood floor is generally between - yuan. If it is engineering plate, it&#;s better to choose a better one.Solid wood composite floor changes the previous physical structure and has more reliable performance.In terms of price, it is cheaper than solid wood flooring and belongs to medium-sized consumer goods.Pavement building decoration materials are popular materials in family decoration at this stage.Generally speaking, floors between yuan / m and yuan / m are better.durabilityThird, look.

If the outdoor humidity exceeds the indoor humidity, close the windows and doors to maintain a low humidity in the room. If the outdoor humidity is lower than the indoor humidity, open the windows and doors to reduce the indoor humidity.In case of cold and humid temperature, central air conditioning or electric fan can be used.reform Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.The solid wood floor is made of natural wood after drying and processing. It has natural texture, environmental protection and health, good touch and elasticity, and also has good sound insulation, sound absorption and heat insulation performance. It won&#;t feel cold when sitting on the solid wood floor in any season. It is very suitable for families with older children at home.Honest wood flooring can be renovated and continue to be used after professional processing.Solid wood floor also has some shortcomings, not wear-resistant, not moisture-proof,ChanekaWhat are the brands of waterproof wood flooring, easy to lose luster, so home decoration solid wood floor should pay attention to the usual waxing and maintenance work!Four look at the brandChaneka,If the new floor is to be sent to a room equipped with large equipment, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape. Select the number of wear-resistant revolutionsStructure: solid wood surface material, basic manual.

As the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance, fire resistance, flame retardancy and chemical pollution resistance, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty, wipe it with a cloth stained with detergent.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.Van zerez, After the last paint is completely dry,Van zerezWaterproof floor, apply floor wax. Cleaning and finishing of ground base course.As mentioned above, calcium powder has good thermal conductivity, so paving the floor at home is the best choice. Even if it gets hot, it will not release harmful gases.SPC floor is a new type of floor, also known as stone plastic floor. Its base material is a composite plate made of stone powder and thermoplastic polymer, which is stirred evenly and extruded at high temperature. At the same time, it has the characteristics of wood and plastic to ensure the strength and toughness of the floor.Alajuelita, Deformation level.Only ~ mm thick.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.

The first kind: pungent taste. If the floor tastes like this it means that it contains a lot of formaldehyde. You need to be careful when choosing. You&#;d better not buy it;Fear of water and moisture: the base material of laminate floor is medium and high density board, if it is not wiped in time with small relative density and large expansion coefficient. Once the reinforcing layer is filled with water after paving, it is easy to cause blistering and deformation due to water absorption and expansion. Its moisture resistance is not strong, and its stability is poor in humid environment. Look at the surface of the board.Potential development,In today&#;s building materials industry, there are many incidents of profiteering and even damaging the interests of consumers. The bad atmosphere has led to the reduction of consumer trust.The price is in a state of confusion, and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price.： Pungent taste if it is the floor with this taste, it means that it contains a lot of formaldehyde. Be careful when choosing, and you&#;d better not buy it;SPC and WPC (waterproof core) vinyl wood flooring can be installed in any room or space.There is no need to worry about temperature fluctuations or moisture exposure.Both floors maintain maximum stability.They can resist all kinds of weather conditions.The performance levels of both floors are excellent.

Solid wood floor is very beneficial to physical and mental health, environmental protection and excellent home decoration effect.The price is quite expensive. Installation and maintenance must be done carefully, and waxing should be done according to time.The price of ordinary solid wood flooring ranges from yuan / m to yuan / m,Van zerezPrice of laminate flooring, and some expensive ones even dare to reach yuan / mHow many years can solid wood flooring be used?From the perspective of the general service life of the floor, whether it is solid wood floor, if it is used at home, it can generally be used for - years depending on the use environment.wholesaler, Wear resistance, wear resistance grade t.Laminate flooring is not recommended. The formaldehyde emission of ℃ flooring is much higher than the conventional standard.If you really want to choose, you might as well look at the holy elephant.The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, the material cost is relatively low; because of its low wear-resistant degree, the tool cost during processing is also low. On the contrary, the cost is much higher if the number of wear-resistant revolutions is high.Van zerez,Compared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring, only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high and the formaldehyde concentration can be basically ignored, it still exists. If the outdoor humidity exceeds the indoor humidity,Van zerezHow much is the wooden floor per square meter, close the windows and doors to maintain a low humidity in the room. If the outdoor humidity is lower than the indoor humidity, open the windows and doors to reduce the indoor humidity.In case of cold and humid temperature, central air conditioning or electric fan can be used.The core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.

Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, have strict restrictions on wood species, so wood base materials are better. The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.Oliveira Duro, Carefully grind with water gauze until the surface is a little rough, remove the powder and apply a second layer of paint. Sticker method: stick the same wood grain paper on the front and back of the board.Songhu City,Oliveira DuroCan floor leather be paved on uneven ground,The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.SPC floor is mainly made of calcium carbonate, including pur Crystal Shield transparent layer, wear-resistant layer, color film layer, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor. Identify from the package

If you want to polish a lot of things, you can minimize the spread of dust in the whole house by closing the door and covering it with plastic cloth, tarpaulin and tape.Hardwood floors often need to be polished during installation.Stable, teak is the best followed by two winged beans, passionfruit, round beans, etc., and then oak.I have seen the evaluation video before. Netizens rub the steel ball of cleaning tableware back and forth on the SPC floor, and there is no trace on the surface.If it&#;s a wooden floor I think it&#;s not like it anymore. You can see how good its wear resistance is.analysis, There are standard,Oliveira DuroWhich is better, ceramic tile or wooden floor, wide plate and narrow plate in terms of specificationsFormaldehyde damage.Second, the price is high and the cost performance is not high. Compared with the reinforced composite floor and double-layer composite floor, the price is more expensive;

Anti slip, more astringent in case of water, not easy to fall.production costs, Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer.Wear resistant paper invented in the s was used on the surface of bowling alley.Because of the creation, invention and application of anti-static laminate flooring products, European manufacturers use wear-resistant paper to strengthen the production and manufacture of anti-static flooring, and take it as a key component to strengthen anti-static flooring.At present, the domestic rate of wear-resistant paper in China has reached about %, but it still needs to be imported.The key index values for evaluating the quality of wear-resistant layer are:Use place of SPC floor: because of its thin thickness, many colors, complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, hospitals, office buildings, shopping malls, homes, KTV and other public places. Ecological and environmental protection.Oliveira Duro,Oliveira DuroEnvironmental protection waterproof floor,Look at the color. Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, choose the dark floor.Polymer base material layer: a composite plate made of stone powder and thermoplastic polymer materials after stirring evenly and then extruded at high temperature. At the same time, this floor has good strength and toughness. Ecological environmental protection;

The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors. Remove the original open putty from the edge, seal the edge again, the relief is really beautiful;If the same gram of wear-resistant paper is used, the wear-resistant degree of crystal is relatively higher than that of relief;The silent foot feel is really good, but it&#;s more expensive;Waterproof and cost-effective. Not many people know its role.Discount,The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride is an environment-friendly, non-toxic and renewable resource. It has been widely used in people&#;s daily life, such as tableware and medical infusion pipe bags. Its environmental protection does not need to be worried.SPC floor (sheet) is mainly composed of natural stone powder which does not contain any radioactive elements after testing by national authoritative departments. It is a new green and environmental protection ground decoration material. Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor, you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.Select well-known brands;

Three look servicesupply,The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.The solid wood floor is made of natural wood after drying and processing. It has natural texture, environmental protection and health, good touch and elasticity, and also has good sound insulation, sound absorption and heat insulation performance. It won&#;t feel cold when sitting on the solid wood floor in any season. It is very suitable for families with older children at home.Honest wood flooring can be renovated and continue to be used after professional processing.Solid wood floor also has some shortcomings, not wear-resistant, not moisture-proof, easy to lose luster, so home decoration solid wood floor should pay attention to the usual waxing and maintenance work! See: whether the thickness of the ground lacquer cloth is full, whether the foaming layer, printing layer and wear-resistant layer of the bottom layer are layered, whether there is the bottom layer, whether the thickness of the bottom layer is like a cicada wing, and whether the back of the ground lacquer cloth is black.Torres vedras,Torres vedrasLaminate ranking, High cost performance.Common cost methods for solid wood flooring are as follows:First, solid wood composite flooring is not the 'composite flooring' that deceives customers in the sales market.This kind of 'composite floor' is reinforced composite.For example, there are some (home) double-layer solid wood composite floors and three-layer solid wood composite floors, the big housework must master this type.

Fifth, smell with your nose is not protected by the environment.The surface coating of piano paint is actually the paint used on the surface of solid wood floor for laminate floor. It is only bright paint. The wear resistance of this coating is far from that of aluminum oxide surface. Its wear resistance is low,San mamed de infistaWhich is better, solid wood or laminate, and solid wood floors are developing towards high wear resistance. Unless you like the coating of this surface.San mamed de infista,Tactile effect: when people contact with wood, the temperature is close in four seasons. When walking on the wood floor, the hardness is moderate and the elasticity is rich. Wood gives people a good sense of touch. Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.Metepec, Pay attention to the size.The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.After the solid wood floor is transported to the project installation site, it shall not be unpacked and installed immediately.After unpacking, it must be kept indoors for more than one week.The solid wood floor can be used only after it is adapted to the temperature and humidity of the room.

Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing. The main raw material of SPC floor is polyvinyl chloride, such as tableware and medical infusion bags, so there is no need to worry about its environmental protection.SPC floor is mainly composed of natural stone powder and does not contain any radioactive elements.It is a new type of green environmental protection floor decoration material. Light and thin.The thickness of SPC floor is mm- mm, and the weight per square meter is only about - kg, less than % of ordinary floor materials.In high-rise buildings it has strong advantages in load-bearing and space saving.At the same time, it has special advantages in secondary decoration and transformation.Advantages of solid wood composite floor;quality, High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.Laminate flooring is suitable for meeting rooms, offices, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, dead joint, moth eaten, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.Fifth, smell with your nose is not protected by the environment.

Sticker method: stick the same wood grain paper on the front and back of the board.Quality management, Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor especially suitable for public places with large flow of people and high degree of wear.In terms of price, other entry-level products include muscarine, birch, elm, etc., with low price; iron cycadwood, two winged bean, ash, teak have high cost performance; oak, etc., have high price performance. Good wear resistance and stabilitySan mamed de infista,One of the modern trends in house design is WPC wood flooring.Because of their many qualities, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.The color is gorgeous, the texture is clear, and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful, fluctuating and cool.Fourth, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,San mamed de infistaWhich is better, wooden floor or floor tile,-, and the new three-layer solid wood floor has , to , mm.

The key raw materials of SPC floor are PVC and lime powder. PVC is a non-toxic renewable energy for environmental protection at room temperature. Lime powder is natural stone indoor formaldehyde, which is more environmentally friendly. High cost performanceAkos Park,Moreover, the formaldehyde in the floor mainly comes from the adhesives and coatings used in production.In order to improve the hardness of the board and have the effect of insect prevention and anti-corrosion, and residual formaldehyde is inevitable.The environmental protection grade of domestic flooring is divided into E, E and E Only the flooring reaching grade E has a formaldehyde emission of no more than mg/l, which meets the requirements of national standards.One of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However,Akos ParkHow much is the wooden floor? One square meter is more suitable, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.Zhytkavichy, About solid wood composite floor.One of the modern trends in house design is WPC wood flooring.Because of their many qualities, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it is very simple to prevent wood floor cracking. Usually do a good job in floor maintenance and humidification of wood floor in areas with low average moisture content, which can be effectively prevented, or raise flowers and fish at home, and put buckets in the corner of the room.Generally speaking, most of the strengthened solid wood composite floors are up to standard commodities within the scope of standardized formaldehyde emission.According to relevant requirements, the formaldehyde emission of commodities in the room shall be class E,Akos ParkWhat board is waterproof and moisture-proof,Akos ParkReinforced solid wood composite floor, i.e. ≤ mg/l.Conclusion of inspectionThe standard ones are generally -mm wide, about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring and most of them are called imitation solid wood flooring.Encyclopedic knowledge,The quality of the solid wood composite board made of high-grade flowers, plants and trees can also be divided into good and bad. Therefore, it is best to select the solid wood composite floor guaranteed by a well-known brand, which can not only ensure the quality, but also deal with the problems of the store.price SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor.

Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and the grip strength of the nail is insufficient.Bones are easy to loosen, and people will make a sound when stepping on them.Recommendation and consultation, Anti slip, more astringent in case of water, not easy to fall.Although many shops recommend solid wood composite or laminate flooring when shopping in flooring stores, they still prefer pure solid wood flooring according to the results before the general evaluation.Compared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring, only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high, and the formaldehyde concentration can be basically ignored, it still exists.Akos Park,The flame retardant grade is B, and the indoor formaldehyde is higher than the national standard.Look at the color.If the cracks on the surface of the wooden floor are not serious or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it.

Produce gene mutation effect. The key raw materials of SPC floor are PVC and lime powder. PVC is a non-toxic renewable energy for environmental protection at room temperature. Lime powder is natural stone indoor formaldehyde, which is more environmentally friendly.Santo Domingo delana,When choosing laminate flooring, we should first see whether it is produced by regular manufacturers and whether there is an authoritative certification report;Secondly, open the moisture-proof layer of the floor expose the substrate, smell the pungent smell, and the formaldehyde content is likely to exceed the standard.Usually,Santo Domingo delanaOutdoor heavy bamboo wood floor, the methods for measuring formaldehyde emission include perforation extraction method, air dryer method and bellows method.The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.Bulgan, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor, you will feel that it has been buffered.The thickness of the floor has good thermal insulation, so the floor will remain warm in the cold season. LookPVC flooring has certain bacteriostatic properties. Some excellent PVC flooring are added with bacteriostatic agents in the production process, which has a strong ability to remove most bacteria and inhibit bacterial reproduction.Therefore, the natural environment with high requirements for disinfection and sterilization, such as PVC floor in hospital consulting room, heat conduction is fast.For reinforced wood flooring, the main standard of floor environmental protection is formaldehyde emission.Under the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panels was E (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit was very loose.Even if the product meets this standard, its formaldehyde content may exceed three times that of E wood-based panel, which is seriously harmful to human health. Therefore, it must not be used for home decoration.Therefore, that is the flooring industry implemented E environmental protection standard, formaldehyde emission ≤ m/l.Although it does not pose a threat to the human body, there is still a lot of free formaldehyde on the floor.The flooring industry has started the second environmental protection revolution.In this environmental protection revolution, the flooring industry has implemented E environmental protection standard, that is formaldehyde emission ≤ m/l.The best way to identify whether the floor is environmentally friendly is to smell a large area on the floor with a hammer to make the floor smell a lot of free formaldehyde.The thickness of SPC floor is mainly selected according to personal needs.Of course, the floor thickness affects the floor price, and the service life will be different, but it does not mean that the thicker the floor is, the better. We need to select according to whether the installation will affect the door closing or other s;Whether the overall effect after installation will be uncoordinated;Material budget and other aspects to select the most appropriate floor thickness.knowledge, Fire protection, fire rating B, second only to stone.Ninth, laser cutting is simple and easy.The surface color of solid wood composite floor shall be determined according to the decoration area, furniture color and overall decoration design style of the customer&#;s home. First,Santo Domingo delanaIs there a waterproof plastic floor, the dark brown floor looks simple for rooms with large area or sufficient light, and the light color floor looks spacious and bright for rooms with small area;Second, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere, and the warm tone floor in the bedroom;Third, the color of furniture can be mixed with medium color floor, and the color of furniture can be mixed with warm tone floor.

Precautions for solid wood floor installation : prevent keel from drying.Highly recommended,The core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.Looking at the bar code formal reinforced composite floor the back of the floor will be printed with not only the brand trademark, but also the model, wear revolutions, environmental protection grade and other information of the floor, so that consumers can see it at a glance. Non toxic and tasteless, not afraid of water, fire and tide;In terms of scratch resistance,Santo Domingo delanaComposite sling waterproof board, resource use and anti-skid performance, SPC floor is better than laminate floor.Santo Domingo delana,Generally, the thickness of composite floor is about cm. From the height of the building, I don&#;t think this is its advantage!what?After all, the gap of cm is very small.Second, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact, the longer the better the floor, it will endanger the reliability of double-layer solid wood floor.The length and total width of solid wood multilayer wood floor should be short, not suitable for long, not suitable for wide.SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage.

Defects of solid wood composite floor A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Rio Tinto,Laminate flooring is not recommended. The formaldehyde emission of ℃ flooring is much higher than the conventional standard.If you really want to choose, you might as well look at the holy elephant.advantageLong-Beach, Skin allergy. Beautiful and diverse colors, seamless splicing construction, heat conduction is fast.

Ecological environment protection the patent of the utility model has the advantages of being conducive to installation and maintenance, and prevents the defects of strengthening the composite floor, such as high formaldehyde content standard, astringent upper feet and so on.Second, it is safe and durable. Consider environmental protection factors.retailer, it can be composed of raw materials with different colors. It is especially suitable for floor tile mosaic ground. It can be composed and matched at will. It makes full use of the intelligence of interior designers to achieve the most ideal practical effect of decoration design;It is enough to turn your ground into handicrafts, and your life and home into a temple of plastic art, full of plastic art atmosphere. Various surface treatments (concave convex pattern, hand grip pattern, pair pattern mirror pattern) It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, sound insulation and noise reduction.Customer first,The third is color.Some customers are very strict about the color of the floor and must maintain the same color difference.But this provision is unscientific.Because the wood is affected by the sun, raw material parts, growth and development parts and lower sawing points, it will inevitably cause inconsistent color difference.... the surface layer of SPC floor has been solved by pur Crystal Shield and has good air permeability. Even if barefoot steps on it, it will not feel cold and very comfortable. In addition,Rio TintoTen famous brands of composite solid wood flooring, the rebound technical layer has stronger ductility. Even if it is constantly bent for degrees,Rio TintoThe wooden floor is good, it is OK. There is no need to worry about falling pain. It is especially suitable for homes with old children.SPC floor will be 'astringent' when it meets water, that is, the friction will increase, and the ground anti-skid characteristics are very good.Its wear resistance is also very high, that is, the use of steel wire brush to rub on the floor, there will be no scratches, and the service life can reach more than years.In addition, SPC floor is very lightweight, with a net weight of only -kg per square meter, which is % of the general floor material, which can reasonably save the height width ratio of indoor space and alleviate the load of road surface.No swelling no deformation, not to mention the maintenance in the middle and later stage. There is a sound insulation and noise reduction layer at the bottom of SPC floor, which is beautiful, practical and beautiful.Do you know how wood floors are classified and why?Now let&#;s introduce the three categories of wood flooring.Therefore, with solid wood texture, latch structure and paint finish, the service life of solid wood floor can reach decades. There is no problem at all, and it can even be passed down from generation to generation. During application, pay attention to prevent the floor from being scratched by hard blocks such as excessive heavy metal needles, laminated glass tiles and shoe nails;When moving furniture, do not move back and forth on the floor;Do not touch the floor with fire or immediately place an amplified power electric water heater on the floor;Do not place strong alkali and strong acid chemicals on the floor;It must not be immersed in water for a long time.Rio Tinto, Soak in waterIn addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved. The internal humidity can not be very high to maintain the dryness and smoothness of the floor. The daily cleaning can be wiped with a dry cotton mop: if it is difficult to remove dirt, it should be wiped with a neutral cleaning organic solvent and then wiped with a dry cotton mop. Do not wipe with acid, alkaline solvent or vehicle gasoline and other solvents.

Small blisters cannot be repaired after they are destroyed. Good fire resistance.monsanto ,Which brand of Taiyuan Fenghua sports floor? The wooden floor of Basketball Hall produced by professional manufacturers adopts high-quality raw materials, such as Russian maple, oak, etc. Pay attention to the size.CipollettiThe water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor. Deformation level. Good wear resistance and stability.

Look at the moisture content. Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.As mentioned above, calcium powder has good thermal conductivity, so paving the floor at home is the best choice. Even if it gets hot,monsanto Wood floor specification, it will not release harmful gases.SPC floor is a new type of floor, which is stirred evenly and extruded at high temperature. At the same time, it has the characteristics of wood and plastic to ensure the strength and toughness of the floor.Fair price,Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy. SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well and the upper feet are comfortable and happy.Twelfth, heat transfer,SPC floor is mainly made of calcium carbonate, including pur Crystal Shield transparent layer, wear-resistant layer,monsanto Wood floor background, color film layer,monsanto Composite laminate manufacturer, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor. Technical floor repair wax. Defects.monsanto ,Fifth, strong ground anti-skid.PVC floor is generally between mm and mm thick and the net weight per square meter is about -kg, which is less than % of the raw materials of general floor.In multi-storey buildings, it has incomparable advantages of load and saving indoor space.In addition, it has unique advantages in the renewal and transformation of old engineering buildings.From to , Chinese traditional pure solid wood flooring and new solid wood flooring, which means three-layer and double-layer solid wood, new solid wood has maintained a high annual growth rate of more than %.Under the economic development layout from to , the upgrading of solid wood flooring category caused by new solid wood will become an important driving force to promote the consumption boom of home decorative flooring.The world financial storm has an impact on China&#;s wood flooring industry chain, but it is not rampant, only lack of confidence in the market.The operation track of the development of market economy has been advancing in the cycle system of wave soldering and wave trough. The flooring industry is depressed and it is not easy to hold it for a long time. China has a strong foreign demand market, and the demand of China&#;s home building materials market is still very large.

Now there are many solid wood floor renovation boards on the market. The renovation boards are processed with solid wood floors as raw materials. They are recycled at low prices and sold at high prices, with considerable profits.How can we avoid buying refurbished boards?Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges, office buildings, processing plants, shops, chain hotels, public libraries, stadiums, subway stations and other public places.Barreiro ,Elm: the texture is exaggerated, showing a gradual shrinking trend in the market.Common cost methods for solid wood flooring are as follows:Relizane,Barreiro Can the floor leather be dragged with water, Method of forging solid wood floor The difference between composite floor and solid wood floor. Identify from the package

Smell Use a level to detect the flatness of the ground and keep the ground on the same level.There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor,Barreiro SPC floor environmental protection, site environment, room size, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.Meticulous workmanship,What about SPC floor?What&#;s special about SPC floor?What about SPC floor?What&#;s special about SPC floor?price

SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained, wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove, and there is no need to maintain it with special maintenance products.Manufacturing cost,First, solid wood composite flooring is not the 'composite flooring' that deceives customers in the sales market.This kind of 'composite floor' is reinforced composite.For example there are some (home) double-layer solid wood composite floors and three-layer solid wood composite floors, the big housework must master this type.Wear resistant paper invented in the s was used on the surface of bowling alley.Because of the creation which belong to this type. Therefore, invention and application of anti-static laminate flooring products, European manufacturers use wear-resistant paper to strengthen the production and manufacture of anti-static flooring, and take it as a key component to strengthen anti-static flooring.At present, the domestic rate of wear-resistant paper in China has reached about %,Barreiro How to deal with the blackening of wooden floor, but it still needs to be imported.The key index values for evaluating the quality of wear-resistant layer are:Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.Barreiro ,When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.Precautions for solid wood floor installation : prevent keel from drying.Fourth,-, and the new three-layer solid wood floor has , to , mm.

The machining accuracy is poor, and it is often claimed that it is: imported large plate and domestic slotting.The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.Coroos, and the dry shrinkage expansion system is very small. It has a good ability to adjust indoor temperature and humidity. The surface layer can show the natural wood grain of wood. The pavement is simple and has a wide range of application.The price is higher than composite flooring and lower than solid wood flooring.It is suitable for installing geothermal heating room.Is the home floor paved with solid wood or structurally reinforced floor?Birkhadem, Anti slip, more astringent in case of water, not easy to fall.When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses. Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product,CoroosEffect drawing of beautiful seam of imitation wood floor tile, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures, missing bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, lack of film and overprint deviationDefects such as color difference color difference and pollution.

Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, manufacturer business unit, model, quantity address, telephone number, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived.Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments,CoroosPrice list of laminate flooring, these gases can sterilize and kill insects, stimulate spirit, calm nerves and produce health care effects on human health. There are standard, wide plate and narrow plate in terms of specificationsQuality Assurance,In order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'. Water resistance Anti skid. Compared with ordinary floor materials, the nano fiber feels more astringent when it is exposed to water and is less likely to slip. The more it meets water, the more astringent it becomes.It is suitable for families with old people and children. It is the preferred ground material in public places with high public safety requirements, such as airports, hospitals, kindergartens, schools, etc.

From to , Chinese traditional pure solid wood flooring and new solid wood flooring, which means three-layer and double-layer solid wood, have been surging in an undercurrent.In recent years, new solid wood has maintained a high annual growth rate of more than %.Under the economic development layout from to , the upgrading of solid wood flooring category caused by new solid wood will become an important driving force to promote the consumption boom of home decorative flooring.The world financial storm has an impact on China&#;s wood flooring industry chain, but it is not rampant, only lack of confidence in the market.The operation track of the development of market economy has been advancing in the cycle system of wave soldering and wave trough. The flooring industry is depressed and it is not easy to hold it for a long time. China has a strong foreign demand market, and the demand of China&#;s home building materials market is still very large.Credit guarantee, Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, the building height can be improved.In addition, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection, health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?Quantity of surface wear-resistant paper: the quantity of surface wear-resistant paper refers to the quality of paper per square meter. The higher the quantity of surface wear-resistant paper, the more metal composites,CoroosWhere does floor leather sell, and the more wear-resistant the reinforced anti-static floor is made, but the clarity will be reduced to a certain extent.The quantitative ysis of common wear-resistant surface paper is grams per square meter and grams per square meter.The reinforced anti-static floor made of g / m wear-resistant surface paper can reach more than revolutions.The reinforced anti-static floor is made of grams of surface metal composite per square meter, and its wear resistance can reach more than revolutions.When lifting the anti-static floor, be sure to use wear-resistant surface paper first, otherwise it will seriously endanger the promotion of the anti-static floor.Spent a lot of money on the solid wood floor at home. If it is used for a long time, the floor surface will lose luster, but it can&#;t be replaced. How can it restore brilliance?First, redecorate the floor to make it look new.What are the main steps of solid wood floor renovation?priceCoroos,Defects: small blisters can not be repaired after damage, and the upper foot is poor.Only ~ mm thick.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price.

The color is gorgeous, the texture is clear, and the pattern gives people a beautiful feeling.It not only has axial drilling texture, but also has irregular thick and light parallel lines for wood texture, with clear and smooth texture and a sense of hierarchy;There are also rotary drilling textures. The wood texture also has mountain or wavy lines. The texture is beautiful fluctuating and cool.The solid wood composite floor made of melamine formaldehyde resin has certain formaldehyde content standards, and the environmental protection requirements must comply with the national standard GB-, that is,amora How much is the price of home laminate, the national standard GB- requires ≤ mg/l.amora ,In today&#;s building materials industry, there are many events to make huge profits and even damage the interests of consumers.The bad atmosphere leads to the decline of consumer trust.Prices are in a state of confusion, consumers are confused and don&#;t know whether their efforts are worth it, so they all want to know that there is a relatively transparent price.Laminate floor is generally composed of four layers of materials namely wear-resistant layer, decorative layer, base material layer and balance layer (moisture-proof).Reinforced floor, also known as paper laminated wood floor, laminate floor. Qualified laminate floor is one or more layers specially used to impregnate thermosetting amino resin.The wood flooring produced in China mainly includes six categories: solid wood flooring, laminate flooring, solid wood composite flooring, multi-layer composite flooring, bamboo flooring and cork flooring, as well as the emerging wood plastic flooring.Natural wood is dried and processed into solid wood floor decoration materials.Also known as log floor, living room and study.Many people ask me, why do the prices of the same flooring brand differ so much?The main factors causing the price difference of laminate flooring are as follows, which is also an important production cost to determine the price of wood flooring.The quality of high-strength floor decoration paper is not high.Consumers who visit the building materials market know that the decorative layer of laminate flooring has all kinds of fine wood grains.Secondly, the wear resistance is several times that of ordinary floor.Ankazobe The internal humidity can not be very high to maintain the dryness and smoothness of the floor. The daily cleaning can be wiped with a dry cotton mop: if it is difficult to remove dirt, it should be wiped with a neutral cleaning organic solvent and then wiped with a dry cotton mop. Do not wipe with acid, alkaline solvent or vehicle gasoline and other solvents.The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , the national standard of laminate flooring has been implemented, and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring. Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.

Advantages: it is warm for many days and cool in summer. Of course, the lines are comfortable on the feet and resist germs.The wear-resistant layer on the surface of laminate floor has experienced unique solutions, high strength, no trace in daily application, and beautiful and generous.Fourth, high ductility and strong impact resistance.Quality inspection report, High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, Chinese traditional pure solid wood flooring and new solid wood flooring, which means three-layer and double-layer solid wood, have been surging in an undercurrent.In recent years, new solid wood has maintained a high annual growth rate of more than %.Under the economic development layout from to , the upgrading of solid wood flooring category caused by new solid wood will become an important driving force to promote the consumption boom of home decorative flooring.The world financial storm has an impact on China&#;s wood flooring industry chain, but it is not rampant, only lack of confidence in the market.The operation track of the development of market economy has been advancing in the cycle system of wave soldering and wave trough. The flooring industry is depressed and it is not easy to hold it for a long time. China has a strong foreign demand market, and the demand of China&#;s home building materials market is still very large.

SPC floor material is soft and has good ductility. Under the impact of hanging objects, the ductility recovers well and the upper feet are comfortable and happy.Honest service,First, the price is cheap, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant,amora Floor leather glue price, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, labor-saving and labor-saving.Disadvantages of floor leatherBecause the whole family decoration process will use a lot of raw materials such as solid wood plates and plywood, as well as a lot of wooden furniture, it is easy to grow insects when encountering appropriate temperature and environmental humidity, and there is no professional pest control treatment before production and processing. In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?amora ,Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee. High cost performance.Third, it is flame retardant, but it can&#;t be burned.