Generally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, and then nailed with lath on it. After planing, paint and wax can make the room elegant, extraordinary, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood,BodeHow to stick the floor leather, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified, both simple and elegant.On the basis of uniform color or reasonable interweaving, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leatherMore accurately, SPC floors with obvious pungent smell should not be environmentally friendly.SPC rural grass-roots raw materials themselves do not contain indoor formaldehyde. The qualified SPC floor should be . There is no formaldehyde release. It is likely to have the taste of air fragrance and modifier. It is not easy to cause harm to everyone&#;s body and make people feel uncomfortable.Although the installation method of SPC latch floor is the same as that of wood floor, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey, the SPC lock floor of different brands will have edge warping, arching, large expansion joints, and even lock fracture after paving on individual sites.Bode, Select the machining accuracy of mechanical equipment.Foot feelKakonko, High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly, and the price is much lower than that of solid wood flooring. Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard.High concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.

Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.Solid wood flooring is not very good in terms of wear resistance, the wear resistance of solid wood composite flooring is also very different from that of reinforced composite flooring.With special components, the wear resistance of reinforced composite floor is much higher than that of ordinary solid wood floor.Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation, folding etc., and must be polished and waxed on time, which is difficult for medical treatment.query,How to prevent cracks in wooden floors. Fire protection, fire rating B, second only to stoneSecond,BodeLaminate flooring material, the time of birth.

Look at the surface of the board.wholesaler, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy, which is similar to the solid wood floor, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.In dry weather, if it is dry season in autumn and winter, pay attention to increase the ground humidity. Wet mop can be used to mop the ground to prevent ground cracking. Wear resistance, wear resistance grade t.Bode, It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile,BodeSPC floor specification, terrazzo, ice cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring: Stable quality and not easy to damage: the solid wood composite floor plate adopts double plate composite type, and the wood chemical fiber is bent into a network structure and laminated. Various thermal stresses of wood are integrated into multiple plates to ensure the flatness and stability of the wood floor and preserve the beauty of the solid wood floorsound insulation

The joint of the floor adopts the form of latch, which controls the vertical displacement of the floor and the horizontal displacement of the floor;The original tenon and groove type, which is often called tongue and groove floor, can only control the vertical displacement of the floor.No matter how early the wooden floor plate is, there is no tenon and groove at the joint, and the displacement in any aspect can not be controlled. Therefore, the floor plate often tilts up and stumbles when walking, which is inconvenient. SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor.Porsgrunn,Elm: the texture is exaggerated, showing a gradual shrinking trend in the market.Wear resistance: generally, it is about ~ times that of coated wood floor.kelowna,Wear resistance: generally, it is about ~ times that of coated wood floor.Direct contact with formaldehyde can cause skin allergy, pigment spots and atrophy. Inhalation of high concentration formaldehyde can cause chronic bronchitis.Three look service

In fact, of the inspection indexes of floor leather, such as wear resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.Third, look at the service.Laminate flooring is a product with high scientific and technological content. From the appearance it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Quality inspection report,Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and the grip strength of the nail is insufficient.Bones are easy to loosen, and people will make a sound when stepping on them. Smell: whether the product has a chemical smell that irritates people. The big smell is likely to be that the limit of harmful substances exceeds the standard or the printing layer on the surface of floor leather releases toxic gas.Color film layer: various decorative layers of wood grain, stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.

Easy to clean: medical treatment is simple, bright as a new mouth, no stains, easy to clean.The surface paint of solid wood composite floor is very good, without excessive vitality maintenance.According to statistics,PorsgrunnSelection of floor leather, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.target,The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.Fourth, look at the brand.In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance pollution resistance and flame resistance,PorsgrunnRanking of top ten famous brands of laminate flooring, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather as long as the surface meets the wear-resistant requirements, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.Porsgrunn,PorsgrunnTunnel composite waterproof board,SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage. Products of well-known brand manufacturers with business history are preferred From the characteristics of the floor, it is divided into crystal surface, relief surface, latch, silent, waterproof and so on.

Fifth, the total thickness of the floor is about , cm, which is also related to his total price.The dark colors completely set off the serious atmosphere.One of the characteristics of industrial style is that it is not decorated, and there is no more suitable material than log. Log floor has a heavy sense of history and looks more flavor.The log material looks more natural, and the cold feeling brought by punching metal.Main differences between WPC and SPC flooringHigh quality and low price, it means that it contains a lot of formaldehyde. Be careful when choosing, and you&#;d better not buy it;Generally, the thickness of composite floor is about cm. From the height of the building, I don&#;t think this is its advantage!what?After all, the gap of cm is very small.SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde, anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals schools, hotels, hotels, restaurants and other places.

First, look at environmental protectionoriginal,In fact, it is very simple to prevent wood floor cracking. Usually, do a good job in floor maintenance and humidification of wood floor in areas with low average moisture content, which can be effectively prevented, or raise flowers and fish at home, and put buckets in the corner of the room.Generally speaking, most of the strengthened solid wood composite floors are up to standard commodities within the scope of standardized formaldehyde emission.According to relevant requirements, the formaldehyde emission of commodities in the room shall be class E, i.e. ≤ mg/l. Select the content standard of dispersed formaldehyde.Needless to say, for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries, giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short,TirguMuresMaterial of waterproof layer, not comfortable to use.TirguMures, It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the material cost is relatively low; because of its low wear-resistant degree the tool cost during processing is also low. On the contrary, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.

High cost performanceSecond, soak in water.Moss,Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height.Advantages: of course, the grain is comfortable, wear-resistant, corrosion-resistant, moisture-resistant, flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen.Alexandro,： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children. See: whether the thickness of the ground lacquer cloth is full, whether the foaming layer printing layer and wear-resistant layer of the bottom layer are layered, whether there is the bottom layer, whether the thickness of the bottom layer is like a cicada wing, and whether the back of the ground lacquer cloth is black.

Lacquer cloth green ( piece)The significance of brand is not only the popularity of the enterprise.A mature and successful brand is not strong and well-known in the end, but forms a solid psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers, which is bred in the minds of consumers by many factors, such as the accumulation of time, the actual actions of enterprises, the continuous improvement of products and services and so on.Enterprise brand is the commitment and attitude of enterprises and the guarantee of consumers.Therefore, when choosing products,MossTop ten famous brands of composite wood flooring, consumers had better choose big brands in order to obtain better quality and service assurance.Laminate flooring contains a certain amount of formaldehyde, which will be harmful to human body if it exceeds the index value specified by the state (mg / L). When purchasing, it is most suitable to choose products certified by the national environmental protection mark or inspection free products.Recommendation and consultation,The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, SPC latch floor with extremely poor quality and low price is adopted, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'.Generally,MossUnit price of laminate flooring, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, paint and wax can make the room elegant, extraordinary, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified, both simple and elegant.On the basis of uniform color or reasonable interweaving, it can make the whole room comfortable and soft and give people an indescribable sense of mystery.Introduction of floor leather

Structure: solid wood surface material, basic manual.query, It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time,MossSPC flooring factory, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.The quality of the solid wood composite board made of high-grade flowers, plants and trees can also be divided into good and bad. Therefore, it is best to select the solid wood composite floor guaranteed by a well-known brand, which can not only ensure the quality, but also deal with the problems of the store.When assembling the solid wood floor,Chamfering rolling paint: a processing technology, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering. Select machining accuracyThe standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.

At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.The cross-section of the floor is rubbed with a file to generate heat in the cross-section, and formaldehyde is fully volatilized (formaldehyde is accelerated at more than degrees, and you can smell the pungent smell at the same time). At this time, you can smell, generally you can smell three different levels of smellTensberg,Eighth antimicrobial activity.People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials,TensbergMultilayer solid wood laminate floor, and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, manufacturerWell known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, business unit, model, quantity, address, telephone number, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived.In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance, moisture resistance, small water absorption, simple construction, convenient maintenance and low price, it also adds the advantages of comfortable foot feeling, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, elasticity, good mechanical strength, good foot feeling strength, foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, moisture resistance, small water absorption good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m, the width is mm ~ mm, and the total thickness is mm (household) ~ mm (public building). Sticker method: stick the same wood grain paper on the front and back of the board.

How to prevent cracks in wooden floors.Nowadays, many post-s couples who have newly purchased industries choose laminate flooring as the floor material of their houses. The key is that laminate flooring has the following advantages. days later, maggots grow on the floor. This problem occurs because the floor contains a lot of impurities.total costSmall blisters can not be repaired after damage, and the upper foot is weak. One week later, the floor sank to the bottom, and the color of the water turned yellow and black. The water contained a lot of impurities Super wear resistance

The current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand, resulting in arching and warping.investment,Second, soak in water.The utility model adopts a three-layer solid wood composite floor, which is less durable than the double-layer floor has good hand feeling, and contains a small amount of indoor formaldehyde.Look at the substrate, break the floor, and look at the substrate inside. There are no impurities in the good substrate, and the color is relatively pure. You can see a lot of impurities in the poor substrate with the naked eye.Most domestic floors use fast-growing forests, and wood has been used since - years. However, imported floors, especially FSC certified plates, have strict restrictions on wood types, so wood substrates are better. Advantages.Tensberg,SPC floor is constantly favored by people at home and abroad. It is an all-round new favorite integrating the advantages of ceramic tiles and other types of floor materials. It is presented and interpreted with a variety of colors, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class.In addition, there are impact resistance, anti environmental pollution, anti sunlight, anti smoke,TensbergGood laminate flooring, easy installation,TensbergAnticorrosive wood floor, easy maintenance, etc.The cross-section of the floor is rubbed with a file to generate heat in the cross-section, and formaldehyde is fully volatilized (formaldehyde is accelerated at more than degrees, and you can smell the pungent smell at the same time). At this time, you can smell, generally you can smell three different levels of smell

Pay attention to the size.Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, business unit, model, address, telephone number, so as not to be deceived.Sibiu don&#;t be greedy for cheap to buy three non laminate flooring The key raw materials of SPC floor are PVC and lime powder. PVC is a non-toxic renewable energy for environmental protection at room temperature. Lime powder is natural stone indoor formaldehyde, which is more environmentally friendly.Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leatherKathmandu, High cost performanceGenerally,SibiuHow to install laminate flooring, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, and then nailed with lath on it. After planing paint and wax can make the room elegant, extraordinary, clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room, and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful,SibiuWhat are the types of waterproof boards, smooth and three-dimensional.Wood floor and wood wallboard interweave, making the style of the whole room unified, both simple and elegant.On the basis of uniform color or reasonable interweaving, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leather Silencing, comfortable and elastic walking feet, not easy to be injured when falling

At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.Ninth, laser cutting is simple and easy.Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing which brings more choices for home decoration.Brand introduction of floor leatherreform,Sixth, his specifications and dimensions are also related to his total price. Main performance.Small blisters can not be repaired after damage, and the upper foot is weak.

For long-term indoor use, high and medium grade products should be selected and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer,When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses.Quantity of surface wear-resistant paper: the quantity of surface wear-resistant paper refers to the quality of paper per square meter. The higher the quantity of surface wear-resistant paper, the more metal composites, and the more wear-resistant the reinforced anti-static floor is made, but the clarity will be reduced to a certain extent.The quantitative ysis of common wear-resistant surface paper is grams per square meter and grams per square meter.The reinforced anti-static floor made of g / m wear-resistant surface paper can reach more than revolutions.The reinforced anti-static floor is made of grams of surface metal composite per square meter, and its wear resistance can reach more than revolutions.When lifting the anti-static floor, be sure to use wear-resistant surface paper first, otherwise it will seriously endanger the promotion of the anti-static floor.Spent a lot of money on the solid wood floor at home. If it is used for a long time, the floor surface will lose luster, but it can&#;t be replaced. How can it restore brilliance?First, generally wipe it dry with a damp mop without dripping water.Sibiu, Daily maintenance does not need waxing. It can be wiped with towel or wet mop. It is widely used in indoor families, hospitals, studies, office buildings, factories, public places, supermarkets, businesses, gymnasiums and other places.SPC floor is mainly composed of a certain proportion of calcium powder and PVC stabilizer to form a composite floor paving material.It is a new material invented in response to national emission reduction, hard SPC indoor floor.SPC floor takes calcium powder as the main raw material. After plasticizing and extruding sheet, four roll calendering hot compress color film decorative layer and wear-resistant layer, SPC floor does not contain heavy metal formaldehyde with harmful substances. It is an environmental protection floor free of formaldehyde and a real formaldehyde floor.Sixth, his specifications and dimensions are also related to his total price.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.

stabilityIf not, then you may need to do a lot of work: there are some interesting surprises lurking under the old floor.When installing laminate flooring, workers must be very careful to complete qualified work.Multilayer carpets or vinyl can be difficult to move and are usually much heavier than they look!After removing the old floor, it is necessary to ensure that the floor is level and in good condition before installation can begin.Similarly,OlsonWood flooring manufacturer, experienced hardwood flooring installation experts can solve this problem for you to ensure that the new flooring has perfect smoothness and levelness.For more convenient tips, please check our hardwood flooring installation guide.Tips for preparing the house before floor installationOlson, which are all printed by bionic technology. Compared with natural solid wood, the overall paving effect is distorted and the visual effect is harder.UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[]OrlovaThe current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand,OlsonHow about laminate flooring, resulting in arching and warping.Polymer base material layer: a composite plate made of stone powder and thermoplastic polymer materials after stirring evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics. Therefore, this floor has good strength and toughness. Ecological environmental protection;Fourth, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,-, and the new three-layer solid wood floor has , to , mm.

To sum up the relief is really beautiful;If the same gram of wear-resistant paper is used, the wear-resistant degree of crystal is relatively higher than that of relief;The silent foot feel is really good, but it&#;s more expensive;Waterproof and cost-effective. Not many people know its role.The double composite solid wood floor adopts double-layer solid wood pressing. It feels like pure natural wood. The installation and maintenance is very simple. It is suitable for floor heating, beautiful and generous, good reliability, and contains a small amount of indoor formaldehyde. Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the airThe most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processWe can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Structure: artificial surface material, artificial basic, wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.

Ultra light and ultra-thinJob description, It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:Briefly describe several common wood varieties: Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.Olson, PVC has no affinity with water, and will not mildew due to high humidity.In southern areas with more rainy seasons, so it is a good choice for flooring.Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusion

There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.Prepare the floor for hardwood installationArad,Second, the composite solid wood floor is a kind of wood floor inherited by the large family of solid wood floor so it is actually a new type of solid wood floor.Because it has the advantages of pure natural wood feeling, convenient installation and maintenance,AradSecond and third tier brand flooring, anti-corrosion and waterproof, bacteriostasis and applicable electric heating, it has become a key fashionable floor type in European countries and has been gradually accepted by the people in China. Skin allergy.Hetauda,The core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.Fourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?From the front,AradHall wood floor modeling, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.

What does the real wood floor look like?The utility model takes the multi-layer solid wood floor as the base material, adopts the high-quality precious wood as the panel, and is coated with resin glue on the hot press, which is made by high temperature and high pressure.When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example,AradSPC floor deformation, the minimum speed of national composite floor is rpm.Therefore, the wear resistance of PVC latch floor is professionally measured by the national testing center.how much, Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.Again, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.

Only ~ mm thick.equipment maintenance ,The crystal surface is basically flat. It&#;s easy to take care of and clean up. All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification.From the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.Arad, Pay attention to the size.The real wood floor is processed with a whole plate with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.The cross-section of the floor is rubbed with a file to generate heat in the cross-section, and formaldehyde is fully volatilized (formaldehyde is accelerated at more than degrees, and you can smell the pungent smell at the same time). At this time, generally you can smell three different levels of smell

Prepare the floor for hardwood installation Mild warm color flooring is strongly recommended for homes for the elderly and children.Mild and warm colors can make people comfortable and cheerful, Good quality and low price.The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, the number of wear-resistant revolutions is usually more than revolutions, while in public places, it is usually more than revolutions. You can buy it on demand.Umm al Qaywayn,Look at the substrate, break the floor, and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. You can see a lot of impurities in the poor substrate with the naked eye.Most domestic floors use fast-growing forests, and wood has been used since - years. However, imported floors,BacauRed wood floor, especially FSC certified plates, have strict restrictions on wood types, so wood substrates are better. Advantages. SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring, you can think of ceramic tile, marble and wood flooring. However, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,BacauHow much is the glue floor? One square meter,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process.Improve the sense of hierarchy, reliability and cost performance of the floor. Why don&#;t the community owners choose the solid wood floor?

The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Second, the composite solid wood floor is a kind of wood floor inherited by the large family of solid wood floor, so it is actually a new type of solid wood floor.Because it has the advantages of pure natural wood feeling, convenient installation and maintenance, anti-corrosion and waterproof, bacteriostasis and applicable electric heating, it has become a key fashionable floor type in European countries and has been gradually accepted by the people in China.Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee.Industry management,Sixth, his specifications and dimensions are also related to his total price.Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.Wear resistance: generally, it is about ~ times that of coated wood floor.

You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.Market trend,The wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, that is, about mm. Generally the decorative paper on the surface is made in China, with many changes in design and color, and the anti ultraviolet ability of the decorative paper is poor.Laminate flooring contains a certain amount of indoor formaldehyde, which is harmful to the body beyond the index required by the state (mg / L).When purchasing, it is best to select commodities with national environmental protection logo verification or national inspection free products.Melamine surface coating is generally used for wallboard, tabletop board, etc. it is used in places with low wear resistance requirements. In the flooring industry, this kind of surface coated floor is called 'false floor'Its wear-resistant revolution is only - revolutions. If it is used with high strength,BacauSPC latch floor installation, the decorative paper on the surface will wear out after two or three months. The standard laminate floor will not have such a problem after years of normal use. There is no wear-resistant layer on this kind of floor decorative paper, the pattern is beautiful and clear, and it is relatively smooth when touched by hand, which is the place where laymen are easy to be fooled.Bacau,How to prevent cracks in wooden floors. Select the number of wear-resistant revolutionsIn addition, there are impact resistance, anti-static, anti environmental pollution, anti sunlight, anti smoke, easy installation, easy maintenance, etc.

Whether it is solid wood composite floor or solid wood floor, its surface needs to be maintained and does not want to strengthen the surface of the floor.When cleaning the solid wood floor, remember not to wipe the solid wood floor directly with wetland.Please choose a special detergent for wood floor cleaning to keep the wood floor in its natural primary color and prevent the wood floor from cracking.The general specification and model of general floor is cm×cm, the specification and model of high-capacity floor can reach cm×cm, with a total area of times that of the general wooden floor.The floor is generally made of common materials such as red sandalwood and Huanghua pear wood. The corner material is discarded and made of a key part of the whole tree. It mainly shows the air. The road construction has an endless sense of flexion and extension and three-dimensional feeling.Oradia,Then look at the quality.The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive, the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, we will discuss why the wood floor cracks.Jerusalem, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring?Compared with wood flooring, first,OradiaWhat are the types of waterproof boards, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leatherOnly ~ mm thick.

The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear,OradiaFloor paint, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly, the wood board shall be processed into the length and width coordinated with the room size according to the room size, and the floor shall be cleaned before laying.When laying, draw the center point and vertical and horizontal vertical lines of the room, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate.Solid wood flooringFirst, look at environmental protectionHigh quality and low price Common floor types:Floor leather (also known as coiled floor),OradiaWood floor processing, a new type of flooring material, belongs to plastic products. It is one of the indispensable floor materials for modern room decoration. It has a thickness of more than mm and a wear-resistant layer of more than . Generally, glass wire with good flatness or double primer is used.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.Advantages of floor leatherFrom the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.

High concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.market,Foot feelThen select one or more floor waxes, which can be adjusted to the same tone as the floor.Heat the strip solid recovery wax with an electric soldering iron and fill it on the scratches on the floor. No scratches can be seen.Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, which will make a sound when people step on it.Oradia,First, look at environmental protectionWear resistance: generally, it is about ~ times that of coated wood floor.Stability: completely disperse the original wood mechanism, destroy the characteristics of various wet expansion and contraction, and the specification is very stable especially for rooms with heating system.

Look at the substrate break the floor, and look at the substrate inside. There are no impurities in the good substrate, and the color is relatively pure. You can see a lot of impurities in the poor substrate with the naked eye.Most domestic floors use fast-growing forests, and wood has been used since - years. However imported floors, especially FSC certified plates, have strict restrictions on wood types, so wood substrates are better. Advantages.After - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth, whether the tenon and groove bite is appropriate, not too loose or too tight by hand and eye observation.At the same time, carefully check the assembly height difference and gap between floors.Braila,Because of its special structure, solid wood composite floor has low requirements for wood and can make full use of materials, so its price is much cheaper than solid wood composite floor.The surface texture of solid wood floor is clear and natural,BrailaIs floor leather harmful, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'. Select the number of wear-resistant revolutionsHow to prevent cracks in wooden floors.

Feature editing voiceSelect well-known brands;Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging.Welcome to inquire,In particular, the previous agency said that the laminate floor is a waterproof floor, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters.Wood plastic flooring manufacturer.jpgFirst, pay attention to the size of the board, and try to choose a wide board with a length of cm, a width of -cm and a thickness of cm, or a standard board with a width of cm and a thickness of cm.

Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.plan, It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, terrazzo,BrailaAggrandizement wood floor,BrailaMoisture proof film for wood floor, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:Sixth, fire and flame retardant.The key injury of formaldehyde is mainly manifested in the stimulation of skin and mucous membrane. Formaldehyde is a toxic chemical substance, which can fuse with protein. When inhaled at high concentration, it has serious irritation and edema of respiratory system, eye irritation and headache.Braila, Identify from the packageFirst, the price is cheap, several times cheaper than wood flooring but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leatherApplicable part editing voice

The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.qualitySean,Plywood is made of solid wood composite cold pressing of plywood, and the surface is inlaid with high-quality hardwood specification laths. The commonly used tree species include white birch, birch, oak, oak, maple, cherry, etc.Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area, it is inconvenient to leave expansion joints and compression strips,Physical and mental health floor is the floor produced according to the production and manufacturing product quality standards and installation and application testing standards (double specifications), which is not easy to cause harmful substances and ensure the health and safety of residential gas. Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, flame retardant, non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements. Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.

Wear resistance: generally, it is about ~ times that of coated wood floor.SPC floor is mainly made of calcium carbonate, including pur Crystal Shield transparent layer, wear-resistant layer, color film layer, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor.Finally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally, such problems rarely occur.How to deal with cracks in wooden floors.Fair price,Secondly, the cracking of the paint surface of the wood floor has nothing to do with the wood floor itself,SeanWhat color does floor leather look good, but the paint surface technology has nothing to do with it, or the long-term storm, the drying shrinkage of the wood floor and the cracking of paint wrinkles.Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.Secondly, the wear resistance is several times that of ordinary floor.

Chamfering rolling paint: a processing technology, which cuts off some of the upper edge of the floor, and then applies paint to cover the color of the substrate, so that the edge color has a sense of hierarchy, so it is deeply loved by the majority of consumers.After the chamfered and painted board is paved, there is a very shallow small seam on the upper edge between the board and the board, which is easy to accumulate dust and inconvenient to clean.There is no such problem for boards without chamfering.supply, The machining accuracy is poor and it is often claimed that it is: imported large plate and domestic slotting.Because SPC floor is composed of wear-resistant layer, mineral rock layer powder and polymer powder,SeanHow much is the wooden floor per square meter,SeanUnit price of laminate flooring, of course, it is not afraid of water. There is no need to worry about the deformation and mildew of home floor due to small blisters.The actual effect of waterproof and mildew removal is very good, so the bathroom, restaurant kitchen and living balcony can be used.The wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, that is about mm. Generally, the decorative paper on the surface is made in China, with many changes in design and color, which is more flexible. The disadvantage is that the color difference is relatively large, A week later, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities. Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.What about SPC floor?What&#;s special about SPC floor?

Defects.The application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process,Second, it is safe and durable.The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore, when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, service and so on.Houston,Precautions for solid wood floor installation : prevent keel from drying.As the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance, impact resistance fire resistance, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty,SalzburgWhat kind of floor is SPC, wipe it with a cloth stained with detergent. Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark.

Common cost methods for solid wood flooring are as follows: All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification. High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly,SalzburgWood floor price, and the price is much lower than that of solid wood flooring.Quality inspection report,Ground lacquer cloth green Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.

From the surface coating, melamine and piano paint.supply, Pay attention to the size. All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor,SalzburgUnit price of laminate flooring, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.Salzburg,The second: I can&#;t tell the taste. The domestic price of this floor is more than yuan;However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used), and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.

Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.Ploiesti,The significance of brand is not only the popularity of the enterprise.A mature and successful brand is not strong and well-known in the end, but forms a solid psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers, which is bred in the minds of consumers by many factors, such as the accumulation of time the actual actions of enterprises, the continuous improvement of products and services and so on.Enterprise brand is the commitment and attitude of enterprises and the guarantee of consumers.Therefore, when choosing products, consumers had better choose big brands in order to obtain better quality and service assurance.Structure: solid wood surface material, basic manual.Poitiers, SmellSPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.First, the price is cheap, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leather

The quality of laminate flooring can also be distinguished by some methods:The first thing to look at is the tree species.The special use environment of ground temperature is not suitable for all solid wood flooring. Therefore, when selecting ground temperature solid wood flooring, it depends on whether the ground temperature solid wood flooring is within the selection range of ground temperature solid wood flooring.Of course, there are people who sell dog meat by hanging sheep&#;s head.Taking the hot floor of oak floor as an example, non-standard manufacturers may misunderstand consumers with non-standard names.Formal flooring enterprises usually display wood names, Latin and other information on the back of the floor. Keep the floor dry and clean. If there is dirt on the floor surface generally wipe it dry with a damp mop without dripping water.Test results,The flame retardant grade is B, and the indoor formaldehyde meets the national industry standard.The surface coating of piano paint is actually the paint used on the surface of solid wood floor for laminate floor. It is only bright paint. The wear resistance of this coating is far from that of aluminum oxide surface. Its wear resistance is low, and solid wood floors are developing towards high wear resistance. Unless you like the coating of this surface.SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde, anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels, restaurants and other places.

Beautiful: it can simulate all kinds of wood grain, design and color on the computer.Convenient and efficient, Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.The first thing to look at is the tree species.The special use environment of ground temperature is not suitable for all solid wood flooring. Therefore, when selecting ground temperature solid wood flooring, there are people who sell dog meat by hanging sheep&#;s head.Taking the hot floor of oak floor as an example, non-standard manufacturers may misunderstand consumers with non-standard names.Formal flooring enterprises usually display wood names, Latin and other information on the back of the floor. Anti slip, more astringent in case of water, not easy to fall.Ploiesti,When choosing wood flooring in , customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In , all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance strong waterproof, not easy to crack and paint.Good flooring should choose good materials,PloiestiHow to deal with the blackening of wooden floor,PloiestiReinforced composite wood floor, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly,PloiestiWhat is waterproof, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.sound insulation

Maintenance method editing voiceHow to prevent cracks in wooden floors.Tromso,Multilayered Wood Flooring Non toxic and tasteless, not afraid of water,TromsoHow much is a cheap wooden floor, fire and tide;In terms of scratch resistance resource use and anti-skid performance, SPC floor is better than laminate floor.Grosseto, Soak in waterThe wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, that is, the decorative paper on the surface is made in China, with many changes in design and color, which is more flexible. The disadvantage is that the color difference is relatively large, and the anti ultraviolet ability of the decorative paper is poor. SPC floors are subject to biological resistance treatment and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring,TromsoDifference between laminate floor and solid wood floor, you can think of ceramic tile, marble and wood flooring. However, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process.

Small blisters can not be repaired after damage,TromsoHow to deal with the edge of floor leather, and the upper foot is weak.What is their price level?The price of reinforced wood floor is generally between - yuan. If it is engineering plate, it will be cheaper.But the price is also related to well-known brands. If it&#;s family decoration, it&#;s better to choose a better one.Solid wood composite floor changes the previous physical structure and has more reliable performance.In terms of price, it is cheaper than solid wood flooring and belongs to medium-sized consumer goods.Pavement building decoration materials are popular materials in family decoration at this stage.Generally speaking, floors between yuan / m and yuan / m are better. Non toxic and tasteless, not afraid of water, fire and tide;In terms of scratch resistance, resource use and anti-skid performance, SPC floor is better than laminate floor.retailerNow there are many solid wood floor renovation boards on the market. The renovation boards are processed with solid wood floors as raw materials. They are recycled at low prices and sold at high prices, with considerable profits.How can we avoid buying refurbished boards? Do not scrape or scratch the floor surface with sharp tools.： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level.

Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color,Finally, antimicrobial activity.sound insulationTromso,In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content. See: whether the thickness of the ground lacquer cloth is full, whether the foaming layer, printing layer and wear-resistant layer of the bottom layer are layered, whether there is the bottom layer, whether the thickness of the bottom layer is like a cicada wing, and whether the back of the ground lacquer cloth is black.： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level.

Maintenance method editing voiceAfter the solid wood floor is transported to the project installation site, it shall not be unpacked and installed immediately.After unpacking, Wear resistance level. Method of forging solid wood floorGujranwala,The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name,SandnesHow is the first floor damp proof, address, instructions and executive standards marked in Chinese.Since , the national standard of laminate flooring has been implemented, and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.Generally, the moisture content of non dry wooden keel is about % and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.

From the perspective of environmental protection the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, but the foot feel is slightly better. In fact, there is little difference between the two. In fact,SandnesHome decoration wood floor, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice. The ground shall be polished and leveled, and all pollutants shall be cleaned without gypsum.The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Quality department,In addition, there are impact resistance, anti-static, anti environmental pollution, anti sunlight, anti smoke, easy installation, easy maintenance, more astringent in case of water, not easy to fallFor laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore,SandnesBasketball wood floor manufacturer, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, which has reduced the formaldehyde emission of the floor to . ‡ / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!

In addition there are impact resistance, anti-static, anti environmental pollution, anti sunlight, anti smoke, easy installation, easy maintenance, etc.Promise and keep promise,As mentioned above, calcium powder has good thermal conductivity, so paving the floor at home is the best choice. Even if it gets hot, it will not release harmful gases.SPC floor is a new type of floor, also known as stone plastic floor. Its base material is a composite plate made of stone powder and thermoplastic polymer, which is stirred evenly and extruded at high temperature. At the same time, it has the characteristics of wood and plastic to ensure the strength and toughness of the floor.Advantages of solid wood composite floor; Main performance.Sandnes, Method of forging solid wood floorPrecautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging.Second, soak in water.

Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.Gallats,The quality of solid wood composite floor is stable, not easy to damage and easy to use. Beautiful and diverse colors,GallatsSPC floor manufacturer, seamless splicing construction, convenient and fast installationToulouse ,Generally the thickness of composite floor is about cm. From the height of the building, I don&#;t think this is its advantage!what?After all the gap of cm is very small.Direct contact with formaldehyde can cause skin allergy, pigment spots and atrophy. Inhalation of high concentration formaldehyde can cause chronic bronchitis.It is roughly divided into common solid wood flooring, reinforced composite wood flooring, solid wood composite flooring, high corrosion-resistant flooring, plastic flooring, antistatic flooring and outdoor stalls according to raw materials.According to the level of ecological environment protection, it is divided into European standard E and E floor, Japanese standard - F star floor regulated by JAS star, etc.E, which is often referred to by Chinese manufacturers, is the name of Chinese specifications, but there is no name of E in European standards.

Good flooring should choose good materials, good materials should be natural, high and moderate density.Some people think that the higher the density of wood-based panel, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.First, it is easy to clean.Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.Installation works,Structure: artificial surface material, artificial basic, wood slag plus strong glue additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.Through the investigation, the following conclusions are drawn: Easy to clean: medical treatment is simple, bright as a new mouth, no stains, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, without excessive vitality maintenance.According to statistics, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.

advantageindex,SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number,GallatsPlastic floor leather, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Good laminate flooring has high density, fine and uniform cross-sectional texture, small and compact particles. Poor quality laminate flooring has large and sparse cross-sectional particles and very rough surface. Again, weigh its weight by hand. Due to high density, good solid wood laminate flooring also has a heavy hand feeling. Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, office buildings, shopping malls,GallatsHow many kinds of floor leather, vehicles and other places with large flow of people.Gallats,Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails. Soak in waterIf not, then you may need to do a lot of work: there are some interesting surprises lurking under the old floor.When installing laminate flooring, workers must be very careful to complete qualified work.Multilayer carpets or vinyl can be difficult to move and are usually much heavier than they look!After removing the old floor, it is necessary to ensure that the floor is level and in good condition before installation can begin.Similarly, experienced hardwood flooring installation experts can solve this problem for you to ensure that the new flooring has perfect smoothness and levelness.For more convenient tips, please check our hardwood flooring installation guide.Tips for preparing the house before floor installation

For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is the formaldehyde emission is ≤ ‡ / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ‡ / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!In order to better prevent excessive water from penetrating into the inner layer of wood floor, when selecting floor cleaner, reduce excessive water as much as possible and dry the mop.In addition, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Don&#;t rush to choose the wood floor coated with light wax, and dry it naturally at night.Christian San, Use the humidity detector to detect the humidity and ensure that the dry humidity is reasonable.Advantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range.Liwonde,The first kind: pungent taste. If the floor tastes like this, it means that it contains a lot of formaldehyde. You need to be careful when choosing. You&#;d better not buy it;In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved.

Laminate flooring is suitable for meeting rooms, offices, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels,Christian SanWaterproof inner wall panel, restaurants and civil houses.Although laminate floor has moisture-proof layer it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, skin clip, dead joint, moth eaten, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.The first thing to look at is the tree species.The special use environment of ground temperature is not suitable for all solid wood flooring. Therefore,Christian SanHow much is laminate flooring per square meter, when selecting ground temperature solid wood flooring, it depends on whether the ground temperature solid wood flooring is within the selection range of ground temperature solid wood flooring.Of course, there are people who sell dog meat by hanging sheep&#;s head.Taking the hot floor of oak floor as an example, non-standard manufacturers may misunderstand consumers with non-standard names.Formal flooring enterprises usually display wood names, Latin and other information on the back of the floor. In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leatherFourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?

Common cost methods for solid wood flooring are as follows:Information recommendationWhen using liquid spray waxing, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring. Pay attention to the size.Christian San, Various surface treatments (concave convex pattern, hand grip pattern, pair pattern, mirror pattern)Fourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design? Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etc.

Foot feelPeople who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential,FredrikstadOutdoor wooden floor, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials, and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.Fredrikstad,Eighth, antimicrobial activity.Stability: completely disperse the original wood mechanism, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system.Makhachkala,FredrikstadLaminate flooring picture,The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive the foot feels comfortable, the service life is relatively long and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks.Four look at the brandFor long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.

The flame retardant grade is B, and the indoor formaldehyde meets the national industry standard.Good laminate flooring has high density, fine and uniform cross-sectional texture, small and compact particles. Poor quality laminate flooring has large and sparse cross-sectional particles and very rough surface. Again, weigh its weight by hand. Due to high density, good solid wood laminate flooring also has a heavy hand feeling.I have seen the evaluation video before. Netizens rub the steel ball of cleaning tableware back and forth on the SPC floor, and there is no trace on the surface.If it&#;s a wooden floor, I think it&#;s not like it anymore. You can see how good its wear resistance is.Total quality assurance, Non toxic and tasteless, not afraid of water, fire and tide;In terms of scratch resistance resource use and anti-skid performance, SPC floor is better than laminate floor.The wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, about mm. Generally, the decorative paper on the surface is made in China, with many changes in design and color, which is more flexible. The disadvantage is that the color difference is relatively large, and the anti ultraviolet ability of the decorative paper is poor.The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive, the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks.

Green environmental protectionInstallation requirements, Anti skid. Compared with ordinary floor materials, the nano fiber feels more astringent when it is exposed to water and is less likely to slip. The more it meets water, the more astringent it becomes.It is suitable for families with old people and children. It is the preferred ground material in public places with high public safety requirements, such as airports, kindergartens, schools, and the wooden floor was also invented by Luban;In folklore,FredrikstadWood floor to ceramic tile, wooden landFourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?Fredrikstad,WPC wood flooring is amazing in touch.It&#;s thick, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor, you will feel that it has been buffered.The thickness of the floor has good thermal insulation, so the floor will remain warm in the cold season. Call a deer a horse: the commercial family pretends that the low-priced tree species are high-priced tree species, which is purely to deceive consumers by using the blind spot of consumers&#; knowledge.Fifth smell with your nose is not protected by the environment.

Sticker method: stick the same wood grain paper on the front and back of the board.SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.Draman, Select water resistance.In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.Duisburg,When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses. The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance,DramanWhat color does floor leather look good, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.

Service is not only related to the guarantee of product quality, but also the performance of corporate image.Some deformation warping and cracking of floor products appear soon after installation, many of which are caused by improper installation.Therefore, whether the service is professional or not also affects the performance of products. Dust-free installation is popular in floor installation. Dust pollution in home decoration can not be underestimated. For example, in floor installation engineering, sawdust and dust will inevitably appear and float in the air, and its harm is also long-term and serious.People who move into new houses often suffer from a strange disease of 'new house syndrome'. For example, when they get up every morning,DramanHow about composite wood floor, they feel suffocated, nausea, and even dizzy;Easy to catch a cold;I often feel uncomfortable in my throat, poor breathing, dizziness and fatigue after a long time.This is because the respiratory tract is infected, and the biggest inducement is the invasion of dust suspended in the air for a long time.In order to avoid dust pollution, it is best to choose dust-free installation. If the address cannot be used temporarily, the indoor air quality and commodity circulation shall be maintained, and it shall not be covered with plastic boxes or newspapers, so as to prevent the long-term surface paint layer from becoming sticky and dull.Related questions edit voiceQuality risk, Select the number of wear-resistant revolutions Call a deer a horse: the commercial family pretends that the low-priced tree species are high-priced tree species, which is purely to deceive consumers by using the blind spot of consumers&#; knowledge. Solid wood flooring.

Lacquer cloth green ( piece)Let's see,We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]Manufacturers generally consist of four layers of raw materials, namely wear-resistant layer, dense plate layer and equilibrium layer.Then look at the qualityDraman,The real wood floor is processed with a whole plate with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor so the cut texture is not commensurate with the surface texture.Ground lacquer cloth green Fire protection, fire rating B, second only to stone