Dont pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.Gallats,The quality of solid wood composite floor is stable, not easy to damage and easy to use. Beautiful and diverse colors,GallatsSPC floor manufacturer, seamless splicing construction, convenient and fast installationToulouse ,Generally the thickness of composite floor is about cm. From the height of the building, I dont think this is its advantage!what?After all the gap of cm is very small.Direct contact with formaldehyde can cause skin allergy, pigment spots and atrophy. Inhalation of high concentration formaldehyde can cause chronic bronchitis.It is roughly divided into common solid wood flooring, reinforced composite wood flooring, solid wood composite flooring, high corrosion-resistant flooring, plastic flooring, antistatic flooring and outdoor stalls according to raw materials.According to the level of ecological environment protection, it is divided into European standard E and E floor, Japanese standard - F star floor regulated by JAS star, etc.E, which is often referred to by Chinese manufacturers, is the name of Chinese specifications, but there is no name of E in European standards.
Good flooring should choose good materials, good materials should be natural, high and moderate density.Some people think that the higher the density of wood-based panel, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprises operation.First, it is easy to clean.Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether its new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.Installation works,Structure: artificial surface material, artificial basic, wood slag plus strong glue additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.Through the investigation, the following conclusions are drawn: Easy to clean: medical treatment is simple, bright as a new mouth, no stains, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, without excessive vitality maintenance.According to statistics, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.
advantageindex,SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you cant choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number,GallatsPlastic floor leather, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Good laminate flooring has high density, fine and uniform cross-sectional texture, small and compact particles. Poor quality laminate flooring has large and sparse cross-sectional particles and very rough surface. Again, weigh its weight by hand. Due to high density, good solid wood laminate flooring also has a heavy hand feeling. Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, office buildings, shopping malls,GallatsHow many kinds of floor leather, vehicles and other places with large flow of people.Gallats,Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails. Soak in waterIf not, then you may need to do a lot of work: there are some interesting surprises lurking under the old floor.When installing laminate flooring, workers must be very careful to complete qualified work.Multilayer carpets or vinyl can be difficult to move and are usually much heavier than they look!After removing the old floor, it is necessary to ensure that the floor is level and in good condition before installation can begin.Similarly, experienced hardwood flooring installation experts can solve this problem for you to ensure that the new flooring has perfect smoothness and levelness.For more convenient tips, please check our hardwood flooring installation guide.Tips for preparing the house before floor installation