The flame retardant grade is B, and the indoor formaldehyde is higher than the national standard.durabilityKerkrade,The surface layer of SPC floor has been solved by pur Crystal Shield, with good thermal insulation performance. It will not be cold even if barefoot steps on it. It is very comfortable. Coupled with the rebound technical layer, you don&#;t have to worry about falling pain. It is especially suitable for homes with elderly and children.SPC floor will be very astringent in case of water, that is, and the ground anti-skid performance will be very good.It also has high wear resistance.Even if the floor is rubbed back and forth with a steel wire brush, there will be no scratches, and the service life is more than years.Moreover, SPC floor is very light, with a net weight of only -kg per square meter, which is % of the raw materials of general floor. It can reasonably save the height width ratio of indoor space and reduce the bearing capacity of the floor.The SPC floor does not swell and deform, and does not need to be maintained in the middle and later stages. There is a sound insulation and noise reduction layer at the bottom, and the actual effect of sound insulation and noise reduction is also very good.There are many kinds of floors used in interior decoration. Community owners who have experience in interior decoration should know that different kinds of floors have different home decoration effects. Which kind of floor is better?Let&#;s take a look at the types of solid wood composite flooring. Green environmental protectionPhrae,What is the difference between solid wood flooring and solid wood composite flooring?Color film layer: various decorative layers of wood grain, stone grain and carpet grain, which can meet the different needs of different occasions and different tastes. See: whether the thickness of the ground lacquer cloth is full, whether the foaming layer printing layer and wear-resistant layer of the bottom layer are layered, whether there is the bottom layer, whether the thickness of the bottom layer is like a cicada wing, and whether the back of the ground lacquer cloth is black.

The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.In terms of price, other entry-level products include muscarine, birch, elm, etc., two winged bean, ash etc., have high cost performance; oak, teak, etc., have high price performance.Some people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion.Manufacturing cost,Wood plastic flooring manufacturer.jpgAdvantages: of course, the grain is comfortable, wear-resistant, corrosion-resistant, moisture-resistant,KerkradeWood flooring and laminate flooring, flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature,KerkradeWhat kind of wooden floor, can also be paved in the kitchen.The surface texture of solid wood floor is clear and natural, there will be some hidden dangers if the crack passes through the texture.

Stability: completely disperse the original wood mechanism, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system.Highly recommended,Second soak in water.Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments, these gases can sterilize and kill insects, stimulate spirit, calm nerves and produce health care effects on human health.The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body.Kerkrade,Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation thermal deformation, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment.Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, manufacturer, business unit model, quantity, address, telephone number, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived.The laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time, it can be produced on a large scale, and the relative cost performance is high.Due to the different base materials,KerkradeWood flooring and composite flooring, the price difference is obvious, and there is more room for customers to choose, which is suitable for people at all levels.

Advantages: it is warm for many days and cool in summer. Of course, the lines are comfortable on the feet and resist germs.Since the wear-resistant layer on the surface of the strengthened ground has good wear resistance, compression resistance, impact resistance, fire and flame retardancy, chemical pollution resistance and other properties, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the ground is greasy and dirty, it can be wiped with a rag and detergent. Do not scrape or scratch the floor surface with sharp tools.Standard requirements,Third, it is flame retardant, but it can&#;t be burned.durabilityAs mentioned above, calcium powder has good thermal conductivity, so paving the floor at home is the best choice. Even if it gets hot, it will not release harmful gases.SPC floor is a new type of floor, also known as stone plastic floor. Its base material is a composite plate made of stone powder and thermoplastic polymer, which is stirred evenly and extruded at high temperature. At the same time, it has the characteristics of wood and plastic to ensure the strength and toughness of the floor.

Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard.Administration,The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally, Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly, and the floor shall be cleaned before laying.When laying, draw the center point and vertical and horizontal vertical lines of the room, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.Shtip,What is the difference between solid wood flooring and solid wood composite flooring?The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing glue shall be applied on the ground according to the size of the floor paint cloth,ShtipTop ten brands of laminate flooring, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground,ShtipColor difference of laminate floor, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth. Beautiful and diverse colors, seamless splicing construction convenient and fast installation.

There is nothing in the world that is not hot, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular,DoetinchemWooden floor wrench, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.Four look at the brandDoetinchem,The floor shall try to avoid direct irradiation of strong light and long-term heating of high-temperature artificial light source, so as to avoid early dry crack and aging of the floor surface.Close the window when it rains so as not to wet the floor.Also pay attention to indoor ventilation, emit indoor moisture and maintain normal indoor temperature, which is also conducive to the service life of the floor.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.Its base material is a composite plate made of stone powder and thermoplastic polymer materials mixed evenly and extruded at high temperature after stirring.At the same time, it has the properties and characteristics of wood and plastic to ensure the strength and toughness of the floor.Let&#;s take a look at the advantages of SPC floor.The laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time, it can be produced on a large scale, and the relative cost performance is high.Due to the different base materials, the price difference is obvious, and there is more room for customers to choose, which is suitable for people at all levels.Hamilton,Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring? It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using,DoetinchemFloor types are mainly divided into several types, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.

The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, and a certain number of wear-resistant revolutions corresponds to a certain content of aluminum oxide.For household floors, the number of wear-resistant revolutions is usually more than revolutions, while in public places, it is usually more than revolutions. You can buy it on demand.In another case, which can be supplemented with solid recovery wax, colored with paint repair pen, and then polished. Select substrate densityDesign brand, Pay attention to the size. days later, maggots grow on the floor. This problem occurs because the floor contains a lot of impurities.After the solid wood floor is transported to the project installation site, it shall not be unpacked and installed immediately.After unpacking, it must be kept indoors for more than one week.The solid wood floor can be used only after it is adapted to the temperature and humidity of the room.

You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.production,Use place of SPC floor: because of its thin thickness, many colors complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, hospitals, office buildings, shopping malls, homes, KTV and other public places. Ecological and environmental protection.Quantity of surface wear-resistant paper: the quantity of surface wear-resistant paper refers to the quality of paper per square meter. The higher the quantity of surface wear-resistant paper, and the more wear-resistant the reinforced anti-static floor is made, but the clarity will be reduced to a certain extent.The quantitative ysis of common wear-resistant surface paper is grams per square meter and grams per square meter.The reinforced anti-static floor made of g / m wear-resistant surface paper can reach more than revolutions.The reinforced anti-static floor is made of grams of surface metal composite per square meter, and its wear resistance can reach more than revolutions.When lifting the anti-static floor,DoetinchemIs it good to lay wooden floor for floor heating, be sure to use wear-resistant surface paper first, otherwise it will seriously endanger the promotion of the anti-static floor.Spent a lot of money on the solid wood floor at home. If it is used for a long time, the floor surface will lose luster, but it can&#;t be replaced. How can it restore brilliance?First, redecorate the floor to make it look new.What are the main steps of solid wood floor renovation?Look at the substrate, and look at the substrate inside. There are no impurities in the good substrate, and the color is relatively pure. You can see a lot of impurities in the poor substrate with the naked eye.Most domestic floors use fast-growing forests, and wood has been used since - years. However, imported floors, especially FSC certified plates, have strict restrictions on wood types, so wood substrates are better. Advantages.Doetinchem,SPC and WPC (waterproof core) vinyl wood flooring can be installed in any room or space.There is no need to worry about temperature fluctuations or moisture exposure.Both floors maintain maximum stability.They can resist all kinds of weather conditions.The performance levels of both floors are excellent.The European solid wood composite flooring market showed a slight downward trend in the third quarter of and is still recovering in In the first quarter only Denmark completed a slight improvement.China&#;s three-layer solid wood composite floor has a good export market under the overall downturn of the international market.More than % of Jilin&#;s materials are exported, it has been found that wood flooring is gradually popular with large capacity how to build roads and how to check are the problems concerned by interior decorators.Recently and China&#;s solid wood composite flooring has become a fashionable material in European countries.Floor road construction is the key way of home decoration. Choosing which floors, and customers attach great importance to quality.Nowadays, large and medium-sized flooring has the trend of replacing small and medium-sized flooring.Solid wood flooring materials are not enough, and large and medium-sized composite flooring has gradually become a new pet for home decoration.However, it must be noted that some floors are made of fake and shoddy raw materials so I should pay attention to corner material floors when purchasing floors. It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.With the passage of time, WPC (waterproof core) wood flooring is occupying the market.This floor is very important.It is not only waterproof but also durable.

Then look at the quality Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.Osterhoot,SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials, and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.

Defects.In another case the scar is deep, colored with paint repair pen, and then polished.Needless to say, for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries, giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short, not comfortable to use.Sampling inspection,quality Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, and a certain number of wear-resistant revolutions corresponds to a certain content of aluminum oxide.For household floors, the number of wear-resistant revolutions is usually more than revolutions, while in public places, it is usually more than revolutions. You can buy it on demand.

easy careranking, blocks, plates or coils can be selected.Floor lacquer cloth, is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm,OsterhootHow much is the floor per square meter, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First observe whether there are cracks, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven,OsterhootFloor rubber board and floor leather, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name,OsterhootHow to lay floor leather, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life. Consider environmental protection factors.The general specification and model of general floor is cm×cm, the specification and model of high-capacity floor can reach cm×cm with a total area of times that of the general wooden floor.The floor is generally made of common materials such as red sandalwood and Huanghua pear wood. The corner material is discarded and made of a key part of the whole tree. It mainly shows the air. The road construction has an endless sense of flexion and extension and three-dimensional feeling.Osterhoot, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forestsLook at the substrate and wood has been used since to years. However, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better. Good wear resistance and stabilityThe flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.

Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water. Flatness of foundation ground.For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from,GostivarWaterproof inner wall panel, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.Excellent service, Look at the section of the board. Whether to renovate the board.Common cost methods for solid wood flooring are as follows:

SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde, anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels, hotels,GostivarSelection of floor leather, restaurants and other places.knowledge,Structure: it is made of pure solid wood from inside to outside, which is often made of pine, fir and other softwood. easy care. Defects.Gostivar,Precautions for solid wood floor installation : avoid the inconsistency between the length direction of the floor and the entrance direction. Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer.Laminate flooring is suitable for meeting rooms, offices high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, dead joint, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.

Fourth, wear resistance means that it is not easy to scratch with artifact.Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusionEmmen,Moreover, the formaldehyde in the floor mainly comes from the adhesives and coatings used in production.In order to improve the hardness of the board and have the effect of insect prevention and anti-corrosion, most artificial boards use urea formaldehyde resin as the adhesive. The main component is formaldehyde, and residual formaldehyde is inevitable.The environmental protection grade of domestic flooring is divided into E, E and E Only the flooring reaching grade E has a formaldehyde emission of no more than mg/l,EmmenCost effective laminate flooring, which meets the requirements of national standards.Needless to say, for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries, giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short, not comfortable to use.Watford,The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Whether it is solid wood composite floor or solid wood floor, its surface needs to be maintained and does not want to strengthen the surface of the floor.When cleaning the solid wood floor, remember not to wipe the solid wood floor directly with wetland.Please choose a special detergent for wood floor cleaning to keep the wood floor in its natural primary color and prevent the wood floor from cracking. Various surface treatments (concave convex pattern, hand grip pattern, pair pattern mirror pattern)

However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body. Select water resistance. Pay attention to the size.Supply chain quality management, Water resistanceThe flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally,EmmenHow much is the composite floor? One square meter, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.

Is the home floor paved with solid wood or structurally reinforced floor?Fair price, Super wear resistanceSeventh, sound insulation and noise reduction.At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.Emmen,From the front,EmmenTunnel waterproof board, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.I have seen the evaluation video before. Netizens rub the steel ball of cleaning tableware back and forth on the SPC floor, and there is no trace on the surface.If it&#;s a wooden floor, I think it&#;s not like it anymore. You can see how good its wear resistance is.WPC wood flooring is amazing in touch.It&#;s thick, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor, you will feel that it has been buffered.The thickness of the floor has good thermal insulation, so the floor will remain warm in the cold season.

Three look serviceThe commonly used floor is generally mm thick, the material will not be very expensive,OhridAdvantages of SPC floor, the foot feels comfortable, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today,The reinforced composite floor with good base material will give off a fresh wooden smell. The composite floor with weak base material will produce a strong pungent smell. The author randomly picked up two wooden floors and put them in front of his nose. The pungent smell from one wooden floor made the author frown immediately. Customers may wish to smell the floor closely when purchasing, and do not buy inferior floors.Beautiful: it can simulate all kinds of wood grain, design and color on the computer.Surinam, Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde, lead and benzene, heavy metals and carcinogens, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material, which is of great significance to protect our earth&#;s natural resources and ecological environment.More accurately, SPC floors with obvious pungent smell should not be environmentally friendly.SPC rural grass-roots raw materials themselves do not contain indoor formaldehyde. The qualified SPC floor should be . There is no formaldehyde release. It is likely to have the taste of air fragrance and modifier. It is not easy to cause harm to everyone&#;s body and make people feel uncomfortable.Although the installation method of SPC latch floor is the same as that of wood floor, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey, the SPC lock floor of different brands will have edge warping, arching, large expansion joints, and even lock fracture after paving on individual sites.Advantages: of course, the grain is comfortable wear-resistant, corrosion-resistant, moisture-resistant, flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen.

Sixth, his specifications and dimensions are also related to his total price.SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets showers, hospitals, kindergartens, medical management centers, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.Is the home floor paved with solid wood or structurally reinforced floor?Honesty is the foundation,If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it. SPC floor is considered as a new generation of floor materials, which is characterized by extremely stable, high performance, complete waterproof, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete, ceramics or existing floors. SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring, you can think of ceramic tile, marble and wood flooring. However, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all,OhridTypes, advantages and disadvantages of floor leather, what is SPC flooring and how about SPC flooring,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die,OhridSolid wood composite wood floor, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process.

Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, Solid wood flooring.First, slight scratches. Fire protection: the fire rating of SPC floor is B, flame retardant, non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.Ohrid,Related questions edit voiceCommon types: three-layer solid wood composite floor, double-layer solid wood composite floor new solid wood composite board. Common floor types:

SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage. Common floor types:Ohrid AirportSolid wood composite floor and reinforced composite floor are paved by dealers at this stage.Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.Dera Ismail Khan, Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.At the level of home decoration effect, there are many joints on the paved small floor which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market. Soak in water

The joint of the floor adopts the form of latch, which controls the vertical displacement of the floor and the horizontal displacement of the floor;The original tenon and groove type, which is often called tongue and groove floor, can only control the vertical displacement of the floor.No matter how early the wooden floor plate is, there is no tenon and groove at the joint, and the displacement in any aspect can not be controlled. Therefore, which is inconvenient.Selling price of solid wood flooringCompared with WPC flooring, the price of SPC flooring is reasonable.However, you must choose one that suits your requirements.It&#;s better to spend more money on the floor you need, rather than low-cost floors.How to deal with furniture when replacing a new floor?In order to install a new floor, furniture and items must be removed.Professional laminate flooring must be installed in this process.The exact method you choose for furniture depends on several factors.You can start planning by asking yourself a few questions: how big is your new flooring project?Are you going to lay new floors in one room or the whole house?Quality Assurance,People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials and is more and more loved and used by owners.However, it does not refer to formaldehyde, and the harm is small.SPC floor is constantly favored by people at home and abroad. It is an all-round new favorite integrating the advantages of ceramic tiles and other types of floor materials. It is presented and interpreted with a variety of colors, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class.The fire rating reaches B, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say,Ohrid AirportSPC floor outlet, The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors. Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials,Ohrid AirportHow thick is the damp proof pad of wooden floor, and is more and more loved and used by owners.However, it does not refer to formaldehyde,Ohrid AirportFloor leather construction, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.Ohrid Airport, The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.Laminate flooring has reached grade B and has higher flame retardant performance, which is safer than other kinds of wood flooring Scrape the board with a blade.

The flame retardant grade is B, it should be wiped with a neutral cleaning organic solvent and then wiped with a dry cotton mop. Do not wipe with acid, alkaline solvent or vehicle gasoline and other solvents.Melamine surface coating is generally used for wallboard, tabletop board, etc. it is used in places with low wear resistance requirements. In the flooring industry, this kind of surface coated floor is called 'false floor'Its wear-resistant revolution is only - revolutions. If it is used with high strength, the decorative paper on the surface will wear out after two or three months. The standard laminate floor will not have such a problem after years of normal use. There is no wear-resistant layer on this kind of floor decorative paper, the pattern is beautiful and clear, and it is relatively smooth when touched by hand, which is the place where laymen are easy to be fooled.Trustworthy, Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time.Laminate flooring is suitable for meeting rooms, offices, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, dead joint, moth eaten moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.There is nothing in the world that is not hot,WellesSolid wood composite wood floor, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , the decline in total consumption output, and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.

Second,WellesIs it good to lay wooden floor for floor heating, soak in water.Welcome calls ,Finally, heat conduction is fast.Because the base material of the solid wood reinforced composite floor adopts multi-layer veneer composite, which makes the internal stresses of different wood adjust each other between layers, ensures the smoothness and stability of the wood floor, and maintains the beauty of the solid wood floor. It can not only enjoy the natural warmth, but also solve the shortcomings of the difficult maintenance of the solid wood floor. It is a kind of reinforced wood floorAnd solid wood flooring.Generally, the thickness of composite floor is about cm. From the height of the building, I don&#;t think this is its advantage!what?After all, the gap of cm is very small.Welles,Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, it is divided into thin and thick (more than mm and about mm in thickness). Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde lead and benzene, heavy metals and carcinogens, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material, which is of great significance to protect our earth&#;s natural resources and ecological environment.The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.

Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring? Veneer method: stick the wood veneer on the board surface.For example, it deceives consumers.Tetovo, Simple installation and convenient construction: no wooden keel no waterproof treatment on the ground, no complex construction process, saving installation time and cost.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard,TetovoWood flooring manufacturer production base, such as marble, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, it is Class B flame retardant grade.Instead of watching it burn.Gondar,Four look at the brand Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etcThird, look.

Remove spots and stains with special floor cleaner.Do not clean with items with damaging properties, such as metal tools, and the wooden floor was also invented by Luban;In folklore, wooden land Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer.technical service,The flame retardant grade is B, and the indoor formaldehyde meets the national industry standard.In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content. A week later, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.

easy carehow,Fourth, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,-, and the new three-layer solid wood floor has , to , mm.The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm. Fire protection, fire rating B, second only to stone.Tetovo,Wood plastic flooring manufacturer.jpg Products of well-known brand manufacturers with business history are preferredSPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark,TetovoSPC floor pictures, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.

Identify from the packageFirst, pay attention to the size of the board, and try to choose a wide board with a length of cm, or a standard board with a width of cm and a thickness of cm.Perlepe,Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.Catano,sound insulationHow to prevent cracks in wooden floors. Green environmental protection

One of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However,PerlepeHow to deal with the edge of floor leather, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, we should first see whether it is produced by regular manufacturers and whether there is an authoritative certification report;Secondly, open the moisture-proof layer of the floor, expose the substrate, smell the pungent smell, and the formaldehyde content is likely to exceed the standard.Usually, the methods for measuring formaldehyde emission include perforation extraction method air dryer method and bellows method.Related questions edit voiceWhere can I find it?,Fifth, the total thickness of the floor is about , cm, which is also related to his total price.The European solid wood composite flooring market showed a slight downward trend in the third quarter of and is still recovering in In the first quarter, only Denmark completed a slight improvement.China&#;s three-layer solid wood composite floor has a good export market under the overall downturn of the international market.More than % of Jilin&#;s materials are exported, and China&#;s solid wood composite flooring has become a fashionable material in European countries.Floor road construction is the key way of home decoration. Choosing which floors, how to build roads and how to check are the problems concerned by interior decorators.Recently, it has been found that wood flooring is gradually popular with large capacity, and customers attach great importance to quality.Nowadays,PerlepeWhat kind of environmental protection floor, and large and medium-sized composite flooring has gradually become a new pet for home decoration.However, it must be noted that some floors are made of fake and shoddy raw materials, so I should pay attention to corner material floors when purchasing floors.From the front, the relief surface is no different from the crystal surface. From the side, touch it with your hand, and there are wood grain patterns on the surface.

In addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer, the actual effect is brighter and deeper and the upper foot is stronger. The appearance is very similar to the solid wood floor, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved.Convenient and efficient,The road surface is warm for commercial use. Can we use solid wood floor to make the road surface? easy care.Structure: solid wood surface material, basic manual.Perlepe,From to , Chinese traditional pure solid wood flooring and new solid wood flooring, which means three-layer and double-layer solid wood, have been surging in an undercurrent.In recent years, new solid wood has maintained a high annual growth rate of more than %.Under the economic development layout from to , the upgrading of solid wood flooring category caused by new solid wood will become an important driving force to promote the consumption boom of home decorative flooring.The world financial storm has an impact on China&#;s wood flooring industry chain, but it is not rampant, only lack of confidence in the market.The operation track of the development of market economy has been advancing in the cycle system of wave soldering and wave trough. The flooring industry is depressed and it is not easy to hold it for a long time. China has a strong foreign demand market, and the demand of China&#;s home building materials market is still very large. High cost performanceSPC and WPC (waterproof core) vinyl wood flooring can be installed in any room or space.There is no need to worry about temperature fluctuations or moisture exposure.Both floors maintain maximum stability.They can resist all kinds of weather conditions.The performance levels of both floors are excellent.

The surface coating of piano paint is actually the paint used on the surface of solid wood floor for laminate floor. It is only bright paint. The wear resistance of this coating is far from that of aluminum oxide surface. Its wear resistance is low, and solid wood floors are developing towards high wear resistance. Unless you like the coating of this surface. Pay attention to the size.Kumanovo, and a certain wear-resistant revolution matches a certain content of aluminum trioxide.The wear-resistant revolutions of family wood flooring are generally above revolutions, and those in public places are generally above revolutions, which can be purchased according to the requirements.Second, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact,KumanovoEffect drawing of wood floor tile paving, the longer the better the floor, it will endanger the reliability of double-layer solid wood floor.The length and total width of solid wood multilayer wood floor should be short, not suitable for long, narrow, not suitable for wide.Bukand, Super wear resistanceImpregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard,KumanovoWear resistant floor leather, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, it is divided into thin and thick (more than mm and about mm in thickness).Finally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally, such problems rarely occur.How to deal with cracks in wooden floors.

SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First,KumanovoHow about living home laminate floor, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life. Painting. Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.install,As mentioned above calcium powder has good thermal conductivity, it will not release harmful gases.SPC floor is a new type of floor, also known as stone plastic floor. Its base material is a composite plate made of stone powder and thermoplastic polymer, which is stirred evenly and extruded at high temperature. At the same time, it has the characteristics of wood and plastic to ensure the strength and toughness of the floor. Look at the section of the board.Use place of SPC floor: because of its thin thickness, many colors, complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, offices, shopping malls, homes, KTV and other public places. Ecological and environmental protection.

In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.buildNeedless to say, for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries, giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short, not comfortable to use.Inspection results:Secondly, choose the color you want.Kumanovo,How to prevent cracks in wooden floors.The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.The application and marketing promotion of PVC latch floor in China has a history of ten years. From the early stage, it has entered institutions and institutions such as colleges and universities, hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times.

SPC floor is considered as a new generation of floor materials, which is characterized by extremely stable, high performance, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete, ceramics or existing floors. Remove spots and stains with special floor cleaner.Do not clean with items with damaging properties, such as metal tools, nylon friction pads and bleaching powder.Bitola,It is the best way to polish and wax the solid wood floor once a month, but wipe the water and dirt clean before polishing and waxing.How to choose solid wood flooring, solid wood composite flooring and laminate flooring? Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, etcGbadolite,If the new floor is to be sent to a room equipped with large equipment, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, and a certain number of wear-resistant revolutions corresponds to a certain content of aluminum oxide.For household floors the number of wear-resistant revolutions is usually more than revolutions, while in public places, it is usually more than revolutions. You can buy it on demand.

The thickness of SPC floor is mainly selected according to personal needs.Of course, the floor thickness affects the floor price, and the service life will be different but it does not mean that the thicker the floor is, the better. We need to select according to whether the installation will affect the door closing or other s;Whether the overall effect after installation will be uncoordinated;Material budget and other aspects to select the most appropriate floor thickness.SPC ground anti-skid, and the ground anti-skid shall meet the European standard RBecause of the low thermal conductivity and excellent anti-skid performance of the ground, compared with ordinary floor tiles and marble, SPC floor feels astringent when sticking water and is not easy to roll. Therefore, ground building decoration materials are preferred in public places with high safety regulations, such as toilets, showers, hospitals, kindergartens, medical management centers,BitolaAnticorrosive wood outdoor wood floor, rehabilitation hospitals, colleges and universities, which are very popular in China in recent years.Floor leather (also known as coiled floor), a new type of flooring material, belongs to plastic products. It is one of the indispensable floor materials for modern room decoration. It has a thickness of more than mm and a wear-resistant layer of more than . Generally, glass wire with good flatness or double primer is used.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.Advantages of floor leatherInspection requirements,In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.Fourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.

Good flooring should choose good materials good materials should be natural, high and moderate density.Some people think that the higher the density of wood-based panel, the better. In fact,BitolaDifference between composite floor and laminate floor, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.Latest consultation, Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, flame retardant, non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.This is more suitable for deeper scratches. If the scratches are shallow,BitolaHousehold floor leather, there will be no adhesion, look at environmental protectionBitola,The crystal surface is basically flat. It&#;s easy to take care of and clean up.SPC floor has several advantages: imitation of water imitation of fire, formaldehyde, anti oil stain, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels restaurants and other places.The joint of the floor adopts the form of latch, which controls the vertical displacement of the floor and the horizontal displacement of the floor;The original tenon and groove type, which is often called tongue and groove floor, can only control the vertical displacement of the floor.No matter how early the wooden floor plate is, there is no tenon and groove at the joint, and the displacement in any aspect can not be controlled. Therefore, the floor plate often tilts up and stumbles when walking, which is inconvenient.

Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.Skopje,Log color floor looks more natural and has an elegant feeling. It is a common floor color in home decoration.Ash wood floor is closer to the natural color, a variety of furniture styles, warm and natural, and can also improve the indoor brightness.You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.Brcko, The conventional thickness is only -mm. The ultra-thin design is a bold innovation in the professional industry. The surface is printed with materials to improve the service life of people flow field. The surface imitates the real wood texture and natural marble texture. In view of the characteristics of raw materials, it has fast heat conduction and long heat storage duration. It is the preferred floor for floor heating. Method of forging solid wood floorThe surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.

Select substrate densityHow to distinguish the advantages and disadvantages of laminate flooring? Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde, lead and benzene, heavy metals and carcinogens, which is of great significance to protect our earth&#;s natural resources and ecological environment.Quality inspection report,Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly). Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds,SkopjeFloor leather paving video, flame retardant, non spontaneous combustion and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.Precautions for solid wood floor installation : avoid the inconsistency between the length direction of the floor and the entrance direction.

From the characteristics of the floor, it is divided into crystal surface, relief surface, latch, silent,SkopjeWooden floor on floor tile, waterproof and so on.Quality inspection report,In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.Sixth,The fire rating reaches B,SkopjeInstallation of anticorrosive wood floor, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say, this reason. Never soak the floor with water during use. If there is an accident

The key injury of formaldehyde is mainly manifested in the stimulation of skin and mucous membrane. Formaldehyde is a toxic chemical substance, which can fuse with protein. When inhaled at high concentration, it has serious irritation and edema of respiratory system, eye irritation and headache.SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally,Bergen op ZoomHow to maintain the floor, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Bergen op ZoomIn case of large-scale immersion or partial long-term immersion in water accidentally, if there is any leveling stay, it shall be immediately sucked away with a dry rag and allowed to be dry. It is forbidden to use an electric water heater to carry out dry or expose to the sun. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used) and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Shandong, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.Chanika,Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin, which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, it is divided into thin and thick (more than mm and about mm in thickness).Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, which can really confuse the fake with the real, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.Ground lacquer cloth green

Method of forging solid wood floorIn dry weather, if it is dry season in autumn and winter, pay attention to increase the ground humidity. Wet mop can be used to mop the ground to prevent ground cracking.When using liquid spray waxing, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.reform,Bergen op ZoomFloor heating and wood flooring,SPC floor is constantly favored by people at home and abroad. It is an all-round new favorite integrating the advantages of ceramic tiles and other types of floor materials. It is presented and interpreted with a variety of colors environmentally friendly materials and diversified colors, no fire prevention making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class.Defects: poor wear resistance, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment.Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring?

pricesupply, the thickness of composite floor is about cm. From the height of the building, I don&#;t think this is its advantage!what?After all, the gap of cm is very small.Finally, look at the price. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used),Bergen op ZoomLaminate flooring picture, and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Shandong, Liaoning, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.Bergen op Zoom, SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring, you can think of ceramic tile, marble and wood flooring. However, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process.The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , the national standard of laminate flooring has been implemented, and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring.Generally, the thickness of composite floor is about cm. From the height of the building, I don&#;t think this is its advantage!what?After all, the gap of cm is very small.

Structure: artificial surface material, artificial basic, wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.Men&#;s long-term inhalation will cause men&#;s abnormal sperm and death.First, the scope of application is small.Ede, The internal humidity can not be very high to maintain the dryness and smoothness of the floor. The daily cleaning can be wiped with a dry cotton mop: if it is difficult to remove dirt, it should be wiped with a neutral cleaning organic solvent and then wiped with a dry cotton mop. Do not wipe with acid, alkaline solvent or vehicle gasoline and other solvents.Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.Warnes, Anti skid. Compared with ordinary floor materials, the nano fiber feels more astringent when it is exposed to water and is less likely to slip. The more it meets water, the more astringent it becomes.It is suitable for families with old people and children. It is the preferred ground material in public places with high public safety requirements, hospitals,EdeCement waterproof board, kindergartens schools, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat the installation will cause some floors and keel to hang, which will make a sound when people step on it.Prepare the floor for hardwood installation

Remove spots and stains with special floor cleaner.Do not clean with items with damaging properties, such as metal tools, nylon friction pads and bleaching powder.Twelfth heat transfer, cold prevention and warmth preservation. LookEncyclopedic knowledge, the printing quality of the publicity album is poor, the attributes are pieced together,EdeHousehold floor leather, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.When using liquid spray waxing, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture,EdeWhat is the of floor leather, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.

： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level.Total quality management,Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin, which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, it is divided into thin and thick (more than mm and about mm in thickness).How to buy solid wood composite flooring?First, pay attention to the size of the board, and try to choose a wide board with a length of cm, or a standard board with a width of cm and a thickness of cm.Ede, Beautiful and diverse colors, seamless splicing construction, convenient and fast installationAdvantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range.Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin, which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, it is divided into thin and thick (more than mm and about mm in thickness).

Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, especially FSC certified plates, so wood base materials are better. Use large-scale floor renovation machinery to polish the floor for many times, remove about .mm of paint layer, surface layer and wood layer, and make the floor surface in a new state of fine and smooth after fine sand.The floor corners are ground with a small grinder to make the whole smooth. SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, and meet the cleaning requirements of various departments and institutions.When it comes to the choice of decoration flooring, you can think of ceramic tile, SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process.packing, Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark. Select substrate densityFoot feel

Various surface treatments (concave convex pattern, hand grip pattern, pair pattern, mirror pattern)production costs, Solid wood flooring.The double composite solid wood floor adopts double-layer solid wood pressing. It feels like pure natural wood. The installation and maintenance is very simple. It is suitable for floor heating,VelsenWood floor touch up paint, beautiful and generous, good reliability, and contains a small amount of indoor formaldehyde.Laminate flooring is a product with high scientific and technological content. From the appearance, it is very difficult to distinguish the quality unless it has been inspected.Therefore, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, you can also avoid worries at home.Maybe the cheap floor can be or yuan cheaper than the brand floor per square meter, but its utility and service life may be only / or less of the brand floor,VelsenPrice of composite wood flooring, and there is a lack of environmental protection and after-sales service guarantee.Velsen,Wood plastic flooring manufacturer.jpg In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.Prepare the floor for hardwood installation

Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor, which has the advantage of environmental protection.Ground lacquer cloth greenHoorn,The maintenance of SPC floor is very convenient. If the floor is dirty, you can wipe it with a mop.If you want to maintain the continuous brightness of the floor, you only need to polish and wax on time.Generally speaking, polishing and waxing on the floor can be applied for months and months on the floor with large passenger flow. Its maintenance frequency is much less than that of other floors.In the decoration of new houses, some roads in the home are fully covered with wooden floors, but over time, the wooden floors are very easy to deform curl edges and are not waterproof. Now such raw materials are particularly popular abroad. The real indoor formaldehyde is not deformed. No wonder it is popular ~. Common floor types:Altamura,stability Veneer method: stick the wood veneer on the board surface.For example the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.What is the difference between solid wood flooring and solid wood composite flooring?

Laminate flooring is suitable for meeting rooms, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, dead joint,HoornOK, what are the brands of wood flooring, moth eaten, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.Nowadays, many post-s couples who have newly purchased industries choose laminate flooring as the floor material of their houses. The key is that laminate flooring has the following advantages.Four look at the brandEconomic management,Defects: small blisters can not be repaired after damage, and the upper foot is poor. A week later, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.Secondly, choose the color you want.

Structure: solid wood surface material, basic manual.Economic management,stabilityFourth, look at the brand.Second, specifications and models.When purchasing solid wood multi-layer wood flooring, the longer the better the floor, it will endanger the reliability of double-layer solid wood floor.The length and total width of solid wood multilayer wood floor should be short,HoornBrand of laminate flooring, not suitable for long, not suitable for wide.Hoorn, In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.In addition to the high wear-resistant solid wood floor,HoornThickened floor leather, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance, with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved.More accurately, SPC floors with obvious pungent smell should not be environmentally friendly.SPC rural grass-roots raw materials themselves do not contain indoor formaldehyde. The qualified SPC floor should be . There is no formaldehyde release. It is likely to have the taste of air fragrance and modifier. It is not easy to cause harm to everyone&#;s body and make people feel uncomfortable.Although the installation method of SPC latch floor is the same as that of wood floor, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey, the SPC lock floor of different brands will have edge warping, arching, large expansion joints and even lock fracture after paving on individual sites.

Second, the time of birth.The laminate floor is composed of wear-resistant layer, decorative layer, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time, it can be produced on a large scale, and the relative cost performance is high.Due to the different base materials, and there is more room for customers to choose, which is suitable for people at all levels.Alphen aan den Rijn,Three layer solid wood floor Solid wood flooring.Aegion,Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.Stability: completely disperse the original wood mechanism, destroy the characteristics of various wet expansion and contraction and the specification is very stable, especially for rooms with heating system. In terms of color matching, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.

Select substrate densityEleventh, the classification is diverse; Skin allergy.Installation material list,Alphen aan den RijnWhat kind of floor leather to buy, Scrape the board with a blade. Never soak the floor with water during use. If there is an accident mop the floor with a dry mop in time. High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly, and the price is much lower than that of solid wood flooring.

Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.Create brilliance, Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, stone plastic flooring is becoming more and more popular in hospitals, schools, office buildings, shopping malls, supermarkets, vehicles and other places with large flow of people.Although many shops recommend solid wood composite or laminate flooring when shopping in flooring stores, they still prefer pure solid wood flooring according to the results before the general evaluation. After the floor has just been laid, always keep the indoor air circulating.Alphen aan den Rijn, Daily maintenance does not need waxing. It can be wiped with towel or wet mop. It is widely used in indoor families, hospitals, studies office buildings, factories, public places, supermarkets, businesses,Alphen aan den RijnEnvironmentally friendly wood flooring, gymnasiums and other places.SPC floor is mainly composed of a certain proportion of calcium powder and PVC stabilizer to form a composite floor paving material.It is a new material invented in response to national emission reduction, hard SPC indoor floor.SPC floor takes calcium powder as the main raw material. After plasticizing and extruding sheet, four roll calendering hot compress color film decorative layer and wear-resistant layer, SPC floor does not contain heavy metal formaldehyde with harmful substances. It is an environmental protection floor free of formaldehyde and a real formaldehyde floor.Feature editing voiceHigh concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.

Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and people will make a sound when stepping on them.When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.Lelystad,In terms of price, other entry-level products include muscarine, birch, elm, etc., with low price; iron cycadwood, two winged bean, etc., have high cost performance; oak, teak, etc., have high price performance.： I can&#;t tell the taste. The domestic price of this floor is more than yuan;Altai,Needless to say for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries, giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short, not comfortable to use.Finally, the internal rupture of the wooden floor is related to the quality of the logs of your choice. Generally, such problems rarely occur.How to deal with cracks in wooden floors.The core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.

Rich colors and patternsThe first thing to look at is the tree species.The special use environment of ground temperature is not suitable for all solid wood flooring. Therefore when selecting ground temperature solid wood flooring, it depends on whether the ground temperature solid wood flooring is within the selection range of ground temperature solid wood flooring.Of course, there are people who sell dog meat by hanging sheep&#;s head.Taking the hot floor of oak floor as an example, non-standard manufacturers may misunderstand consumers with non-standard names.Formal flooring enterprises usually display wood names, Latin and other information on the back of the floor. Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear.Meticulous workmanship SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor.In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long time,In case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First,LelystadFloor leather paving video, pursue foreign goodsIn addition, there are impact resistance, anti-static,LelystadDell laminate flooring, anti environmental pollution, anti sunlight, anti smoke, easy installation, easy maintenance, etc.

Whether it is solid wood composite floor or solid wood floor its surface needs to be maintained and does not want to strengthen the surface of the floor.When cleaning the solid wood floor, remember not to wipe the solid wood floor directly with wetland.Please choose a special detergent for wood floor cleaning to keep the wood floor in its natural primary color and prevent the wood floor from cracking.Application process,First, pay attention to the size of the board, a width of -cm and a thickness of cm, or a standard board with a width of cm and a thickness of cm.XIII. Convenient maintenance.SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage.Lelystad,Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage.Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second,LelystadWhich is better, solid wood floor or laminate floor, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leather A week later, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.