Silencing, comfortable and elastic walking feet, not easy to be injured when fallingIn order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long time,In case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goodsLoule,Fourth, high ductility and strong impact resistance. Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etcGivatayim, mop the floor with a dry mop in time.In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance, moisture resistance, small water absorption,LouleAggrandizement wood floor, simple construction, convenient maintenance and low price, it also adds the advantages of comfortable foot feeling, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, small water absorption,LouleHow to maintain laminate floor, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m the width is mm ~ mm, and the total thickness is mm (household) ~ mm (public building). Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, schools, office buildings,LouleWhich is better, wood floor or wood grain brick, shopping malls, supermarkets, vehicles and other places with large flow of people.

The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processThird, it cannot be repaired.Now there are many solid wood floor renovation boards on the market. The renovation boards are processed with solid wood floors as raw materials. They are recycled at low prices and sold at high prices,However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.The current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand, resulting in arching and warping. In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.

For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.Process inspection, The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies. The relative density of plate is adopted. Scrape the board with a blade.Loule, Moisture proof, no deformation in case of water and can be used in kitchen, toilet, basement, etcIn this category, it can be shown that it is a relatively safe commodity.In addition it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.

Precautions for solid wood floor installation : do not use the fixing method of wooden wedge and nail. Anti slip, not easy to fall.Pontinha, Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and the grip strength of the nail is insufficient.Bones are easy to loosen and people will make a sound when stepping on them.Lvov,PontinhaHow to maintain the floor, In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, and there are relatively few gaps in the floor. Most of them are thickened, that is, about mm. Generally, the decorative paper on the surface is made in China, with many changes in design and color, which is more flexible. The disadvantage is that the color difference is relatively large, and the anti ultraviolet ability of the decorative paper is poor. SPC floor has special anti-skid property. The more it meets water, the more astringent it is. Even if you wear running shoes with nails, you won&#;t leave scratches on the floor.

Second, the time of birth. Brush the finish paint three to four times according to the above procedure, and the last time does not need polishing.I have seen the evaluation video before. Netizens rub the steel ball of cleaning tableware back and forth on the SPC floor, and there is no trace on the surface.If it&#;s a wooden floor, I think it&#;s not like it anymore. You can see how good its wear resistance is.project, LookStructure: solid wood surface material,PontinhaMaintenance of composite solid wood floor, basic manual.Laminate flooring has reached grade B and has higher flame retardant performance, which is safer than other kinds of wood flooring

The fire rating reaches B, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors that is to say, this reason.Fair price, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop. Carefully grind with water gauze until the surface is a little rough, remove the powder and apply a second layer of paint.The flame retardant grade is B, and the indoor formaldehyde is higher than the national standard.Pontinha,Third, look.Now there are many solid wood floor renovation boards on the market. The renovation boards are processed with solid wood floors as raw materials. They are recycled at low prices and sold at high prices, with considerable profits.How can we avoid buying refurbished boards? Various surface treatments (concave convex pattern, hand grip pattern, pair pattern

Good wear resistance and stabilityIs the home floor paved with solid wood or structurally reinforced floor?Monte Estoril,The sports wood floor brings people close to the vitality of nature and can meet modern people&#;s yearning for green sports life. The wood board is full of vitality, can support people, full of natural flavor and make the moving wood space full of vitality.Good flooring should choose good materials, good materials should be natural, the better. In fact, it is not. If the density is too high its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.Bac Lieu, Good wear resistance and stability Good wear resistance and stabilitythickness

Common floor types:The high-grade laminate flooring has high texture definition and more realistic designs and colors. Even the wood grain scabs and texture details are comparable to those of real wood. Moreover, the printing of low-quality wood flooring is stiff, rough and blurred. Users can touch the surface of wood flooring with their hands. Whether it is wood grain or tactile laminate flooring, it overturns the plane effect of ordinary flooring and has a stronger three-dimensional sense. Beautiful and diverse colors, seamless splicing construction, convenient and fast installationDirect labor, Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board, plus the price of installation and spare parts. In terms of comfort strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, such as marble, wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned,Monte EstorilPrice list of laminate flooring,Monte EstorilPrice of laminate flooring, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.SPC vinyl flooring manufacturers focus a lot on the dense core of SPC flooring.They tried to make it more resistant to shrinkage.

Anti skid. Compared with ordinary floor materials, the nano fiber feels more astringent when it is exposed to water and is less likely to slip. The more it meets water, the more astringent it becomes.It is suitable for families with old people and children. It is the preferred ground material in public places with high public safety requirements, such as airports, hospitals, kindergartens, schools etc.How many?,Is the home floor paved with solid wood or structurally reinforced floor?In today&#;s building materials industry, there are many events to make huge profits and even damage the interests of consumers.The bad atmosphere leads to the decline of consumer trust.Prices are in a state of confusion, consumers are confused and don&#;t know whether their efforts are worth it, so they all want to know that there is a relatively transparent price.Laminate floor is generally composed of four layers of materials, namely wear-resistant layer, decorative layer, base material layer and balance layer (moisture-proof).Reinforced floor, laminate floor. Qualified laminate floor is one or more layers specially used to impregnate thermosetting amino resin.The wood flooring produced in China mainly includes six categories: solid wood flooring, laminate flooring, solid wood composite flooring, multi-layer composite flooring, bamboo flooring and cork flooring, as well as the emerging wood plastic flooring.Natural wood is dried and processed into solid wood floor decoration materials.Also known as log floor, it is directly processed with solid wood.Wood grain grows naturally and has poor thermal conductivity. It can warm in winter and cool in summer. It has the characteristics of comfortable foot feeling and safe use. It is an ideal material for floor decoration such as bedroom,Monte EstorilWalnut floor decoration effect drawing, living room and study.Many people ask me, why do the prices of the same flooring brand differ so much?The main factors causing the price difference of laminate flooring are as follows, the lines are comfortable on the feet and resist germs.Monte Estoril,Advantages: it is warm for many days and cool in summer. Of course, the lines are comfortable on the feet and resist germs.The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring. See: whether the thickness of the ground lacquer cloth is full, whether the foaming layer, printing layer and wear-resistant layer of the bottom layer are layered, whether there is the bottom layer, whether the thickness of the bottom layer is like a cicada wing and whether the back of the ground lacquer cloth is black.

The conventional thickness is only -mm. The ultra-thin design is a bold innovation in the professional industry. The surface is printed with materials to improve the service life of people flow field. The surface imitates the real wood texture and natural marble texture. In view of the characteristics of raw materials, it has fast heat conduction and long heat storage duration. It is the preferred floor for floor heating.The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring.Pinhal Novo, Remove the dust on the ground.In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell.Nuremberg ,We hope these techniques will help simplify the plan for installing new floors.If you plan to renovate your house and add new floor elements, please provide room sizes free of charge!Obtain expert estimates to understand how many floors are needed to better determine the project budget.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.European and American countries call this kind of floor RVP (rigid vinyl plate), rigid plastic floor.The base material is a composite plate made of stone powder and thermoplastic polymer materials after mixing evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics to ensure the strength and toughness of the floor.Wear resistant layer: PVC transparent wear-resistant layer, with a thickness of about .mm, transparent texture strong adhesion, wear resistance and scratch resistance, and the wear-resistant coefficient can reach - revolutions.[]The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone,Pinhal NovoHow much is the wooden floor? One square meter is more suitable, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.advantage

In today&#;s building materials industry, there are many incidents of profiteering and even damaging the interests of consumers. The bad atmosphere has led to the reduction of consumer trust.The price is in a state of confusion, and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price.Rubber: rubber with poor toughness and stability. Wear resistance, wear resistance Grade Treform,We can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?： Pungent taste if it is the floor with this taste, it means that it contains a lot of formaldehyde. Be careful when choosing, and you&#;d better not buy it;In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance moisture resistance,Pinhal NovoTop 10 brands of laminate flooring, small water absorption,Pinhal NovoWaterproof floor, simple construction, it also adds the advantages of comfortable foot feeling, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m, the width is mm ~ mm, and the total thickness is mm (household) ~ mm (public building).

SPC floor adopts marble powder and new materials, which is more green and environment-friendly.The cost of stone plastic floor is quite low, and it can be flame retardant. It has no affinity with water and is not easy to mildew. Stone plastic floor has sound-absorbing effect, manufacturer, business unit, model, quantity, address, telephone number, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived.Good laminate flooring has high density fine and uniform cross-sectional texture, small and compact particles. Poor quality laminate flooring has large and sparse cross-sectional particles and very rough surface. Again weigh its weight by hand. Due to high density, good solid wood laminate flooring also has a heavy hand feeling.The third kind: you can smell the faint smell of wood. This floor shows that there is little glue content.It can reach European standard E levelPinhal Novo,Sixth, his specifications and dimensions are also related to his total price. Anti slip, more astringent in case of water, not easy to fall. Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, the building height can be improved.In addition, due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?

SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels, hotels, restaurants and other places.WPC wood flooring is amazing in touch.It&#;s thick, so you&#;ll feel comfortable under your feet.Great stability.When you walk on the floor, you will feel that it has been buffered.The thickness of the floor has good thermal insulation so the floor will remain warm in the cold season.Carnaxide,Small blisters cannot be repaired after they are destroyed.Feature editing voiceOtrokovice,The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore, when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, service and so on.Structure: solid wood surface material, basic manual. About solid wood composite floor.

SPC floor is constantly favored by people at home and abroad. It is an all-round new favorite integrating the advantages of ceramic tiles and other types of floor materials. It is presented and interpreted with a variety of colors,CarnaxideWhich is better, wood floor or wood grain brick, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class. Use a level to detect the flatness of the ground and keep the ground on the same level.Then look at the qualityQuality inspection report,The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula,CarnaxideHousehold wooden floor, and then leveled with sandpaper after drying.After the ground is flat, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way,CarnaxideHow should the wooden floor be cleaned, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth. Fire protection, fire rating B, second only to stoneIn fact, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.

Advantages: of course the grain is comfortable, wear-resistant, corrosion-resistant, moisture-resistant, flame retardant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen.Quality risk,The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, and the wood floor cracks in this processMoreover, families with laminate floors should also pay attention to the removal methods of daily indoor formaldehyde.The usual practices are: Open windows for ventilation to let the polluted air spread at any time; Place green plants in the house to let the plants absorb formaldehyde; Use a purifier, such as anion, to filter formaldehyde; Use chemical collectors, such as formaldehyde collectors, to neutralize formaldehyde.Using these methods, you can minimize the formaldehyde content in your room.Let&#;s look at environmental protection first. After the floor has just been laid, always keep the indoor air circulating.Carnaxide,Compared with WPC flooring, the price of SPC flooring is reasonable.However, you must choose one that suits your requirements.It&#;s better to spend more money on the floor you need, rather than low-cost floors.How to deal with furniture when replacing a new floor?In order to install a new floor, furniture and items must be removed.Professional laminate flooring must be installed in this process.The exact method you choose for furniture depends on several factors.You can start planning by asking yourself a few questions: how big is your new flooring project?Are you going to lay new floors in one room or the whole house? Wear resistance, wear resistance Grade TOnly ~ mm thick.

Water resistance Rich colors and patternsEstoril,Many so-called flooring brands are actually made by one person who registers a trademark and asks others to process it. They are also known as brand flooring. When they are floor agents (floor franchises), it is also necessary to find out the background of flooring brands. Sometimes they should be careful of foreign brands that forge foreign capital background.As the saying goes, be careful and you can make a ten thousand year ship. Defects.Baytuniya,Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price.The biggest highlight is that they are not afraid of water and shop willfully anywhere.SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, pay attention to the different places of use, and the selected patterns should also be different.For example, you can&#;t choose products with convex effect;In solemn places it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced),EstorilWhat kind of floor leather to buy, so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.

Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.But in any case, the compound floor will have formaldehyde, which can not be prevented.If you want to use formaldehyde floor, I suggest using multi-layer and three-layer solid wood composite floor, which has a better effect on formaldehyde purification.Now, wood flooring has become one of the commonly used ground decoration materials.While enjoying sports and fitness experience, people also pay more attention to the health of the surrounding environment, which is the favorite of many sports lovers.Needless to say for a long time, the lacquered cloth market was occupied by low-grade unlined lacquered cloth produced in Taiwan and other overseas countries, giving consumers the wrong message that China&#;s quality is not up to standard. In fact, after the inspection of these, the surface wear-resistant layer is only .mm, which is made of poorly processed and Recycled PVC. It does not meet the national standards for plastic coiled materials at all, so its service life is short,EstorilComplete collection of floor leather, not comfortable to use.Product survey, From the characteristics of the floor, it is divided into crystal surface, relief surface, latch, silent, waterproof and so on. Ultra light and ultra-thinIn particular, the previous agency said that the laminate floor is a waterproof floor,EstorilWhich is better, laminate floor or composite wood floor, the only taboo in the application of laminate floor is small blisters.

advantageManufacturing cost, SPC floors are subject to biological resistance treatment, and the unique sealing of the surface layer makes the products have the characteristics of anti bacteria and antibacterial, you can think of ceramic tile, marble and wood flooring. However SPC flooring has become the first choice for people to buy Flooring in developed countries and regions such as Europe, America, Japan and South Korea, and the domestic market is gradually accepting SPC flooring. Why SPC flooring is popular? First of all, what is SPC flooring and how about SPC flooring,Now let&#;s learn what SPC floor is and how SPC floor is.SPC is the abbreviation of stone plastic composites (stone plastic composites). The main raw material is polyvinyl chloride resin. It is made by extruding SPC substrate by extruder combined with T-shaped die, and heating, laminating and embossing PVC wear-resistant layer, PVC color film and SPC substrate by three roll or four roll calender at one time. Glue is not used in the production process.The solid wood composite floor made of melamine formaldehyde resin has certain formaldehyde content standards and the environmental protection requirements must comply with the national standard GB-, that is, the national standard GB- requires ≤ mg/l.In addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved.Estoril, Non toxic and tasteless, not afraid of water, fire and tide;In terms of scratch resistance, resource use and anti-skid performance, SPC floor is better than laminate floor.Use place of SPC floor: because of its thin thickness, many colors, complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, offices, office buildings, shopping malls, homes, KTV and other public places. Ecological and environmental protection.The cross-section of the floor is rubbed with a file to generate heat in the cross-section, and formaldehyde is fully volatilized (formaldehyde is accelerated at more than degrees, and you can smell the pungent smell at the same time). At this time, you can smell, generally you can smell three different levels of smell

High concentration formaldehyde is a genotoxic chemical.In animal experiments, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.Charneca,When choosing laminate flooring, we should first see whether it is produced by regular manufacturers and whether there is an authoritative certification report;Secondly, open the moisture-proof layer of the floor, expose the substrate, smell the pungent smell, and the formaldehyde content is likely to exceed the standard.Usually the methods for measuring formaldehyde emission include perforation extraction method, look.Acacias,Wood plastic flooring manufacturer.jpg Main performance. Good wear resistance and stability

Identify from the packagePVC floor has ordinary floor raw materials, which can not be compared with the actual effect of sound insulation, and its sound insulation performance can reach - sound shells. Therefore, PVC floor is selected in the natural environment that must be quiet, school libraries, multi-al halls, cinemas, etc, shake the container containing floor wax first and stir it fully and evenly.Before waxing the wooden floor of the whole room, local trial must be carried out in inconspicuous places such as corners of the room to confirm whether there are abnormalities.In order to prevent floor wax from polluting walls, skirting lines and furniture, the above parts must be covered with adhesive tape paper.Fully soak the floor wax with a clean rag. It&#;s best not to fall off.Development Curriculum, In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements,CharnecaHow did you buy the floor leather, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room. Easy to clean: medical treatment is simple, bright as a new mouth, no stains, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, without excessive vitality maintenance.According to statistics, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.

The cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃ and some irritating smell can be smelled). At this time,CharnecaMaterial of laminate floor, you can smell it. Generally, you can smell three different levels of smell:Equipment maintenance,The thickness of SPC floor is mainly selected according to personal needs.Of course, the floor thickness affects the floor price, and the service life will be different, but it does not mean that the thicker the floor is, the better. We need to select according to whether the installation will affect the door closing or other s;Whether the overall effect after installation will be uncoordinated;Material budget and other aspects to select the most appropriate floor thickness.PVC floor is generally between mm and mm thick, and the net weight per square meter is about -kg, which is less than % of the raw materials of general floor.In multi-storey buildings, it has incomparable advantages of load and saving indoor space.In addition, it has unique advantages in the renewal and transformation of old engineering buildings. Generally, wear-resistant paper with aluminum oxide content of about g / m is used, or wear-resistant paper is not used.Low density board (medium density board is rarely used), and the number of wear-resistant revolutions is usually between - revolutions.The edges and corners will be worn after being used for one or two years at most.With Hunan, Hubei, Shandong, Jilin and Heilongjiang as the gathering points, the suburbs of Beijing are still rampant.Low quality, not environmental protection, government departments are strictly investigating and dealing with it.Such illegal businesses only take into account short-term interests and have no after-sales service guarantee. The price ranges from to yuan.Charneca, The machining accuracy is poor, and it is often claimed that it is: imported large plate and domestic slotting.Three look serviceFor long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials namely wear-resistant layer, decorative layer high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.

SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather,FanzeresLaminate flooring brand ranking, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.The thickness of SPC floor is mainly selected according to personal needs.Of course, the floor thickness affects the floor price, and the service life will be different, but it does not mean that the thicker the floor is, the better. We need to select according to whether the installation will affect the door closing or other s;Whether the overall effect after installation will be uncoordinated;Material budget and other aspects to select the most appropriate floor thickness.Fanzeres,Entering the flooring market, the marks of the world&#;s top ten brands China&#;s top ten brands and flooring top ten brands can be seen everywhere.Experts pointed out that truly mature brands attach great importance to brand image.Their honorary titles are often awarded by authoritative institutions, such as China&#;s top ten flooring brands, which are produced by the Chinese brand network combined with the voting of Internet users, with high authority.Therefore, people who want to be a floor agent (floor franchise) should clearly understand the authorized organization of the brand honor certificate when doing brand survey. Identify from the packageKindu,The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore, when consumers choose products, service and so on.The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different; Defects.

In fact, it is very simple to prevent wood floor cracking. Usually, do a good job in floor maintenance and humidification of wood floor in areas with low average moisture content,FanzeresClassification of floors, which can be effectively prevented, or raise flowers and fish at home, and put buckets in the corner of the room.Generally speaking, most of the strengthened solid wood composite floors are up to standard commodities within the scope of standardized formaldehyde emission.According to relevant requirements, the formaldehyde emission of commodities in the room shall be class E i.e. ≤ mg/l.Third, the processing technology is highly regulated;Its structure is complicated, its quality varies greatly, and its essential quality is not easy to distinguish;We can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Convenient and efficient,In particular, the previous agency said that the laminate floor is a waterproof floor, which is only the surface layer. In fact the only taboo in the application of laminate floor is small blisters. Fire protection, fire rating B, second only to stone.We can also scrape the board with a blade.The real solid wood floor is painted with wood and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?

The standard ones are generally -mm wide, about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.Excellent service,How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving, the indoor ground shall be treated first.European flooring.Precautions for solid wood floor installation : prevent keel from drying.Fanzeres, Rich colors and patternsRelated questions edit voiceThe cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃, and some irritating smell can be smelled). At this time, you can smell three different levels of smell:

Stimulating effect.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, wall tiles etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.Oliveira do Douro, Use the humidity detector to detect the humidity and ensure that the dry humidity is reasonable.The third kind: you can smell the faint smell of wood. This floor shows that there is little glue content.It can reach European standard E levelNandi,In order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted,Oliveira do DouroDamp proof wood floor, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'. Mild warm color flooring is strongly recommended for homes for the elderly and children.Mild and warm colors can make people comfortable and cheerful, so choose such a floor suitable for the elderly and children. Main performance.

Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, which will make a sound when people step on it.... the surface layer of SPC floor has been solved by pur Crystal Shield and has good air permeability. Even if barefoot steps on it, it will not feel cold and very comfortable. In addition, the rebound technical layer has stronger ductility. Even if it is constantly bent for degrees, it is OK. There is no need to worry about falling pain. It is especially suitable for homes with old children.SPC floor will be 'astringent' when it meets water, that is,Oliveira do DouroBenefits of wood flooring, the friction will increase, and the ground anti-skid characteristics are very good.Its wear resistance is also very high, that is, the use of steel wire brush to rub on the floor, there will be no scratches, and the service life can reach more than years.In addition, SPC floor is very lightweight, with a net weight of only -kg per square meter,Oliveira do DouroSPC flooring market, which is % of the general floor material, which can reasonably save the height width ratio of indoor space and alleviate the load of road surface.No swelling, no deformation, not to mention the maintenance in the middle and later stage. There is a sound insulation and noise reduction layer at the bottom of SPC floor, and the actual effect of sound insulation and noise reduction is also very good.Many people will choose to decorate with wooden floor, which is beautiful, practical and beautiful.Do you know how wood floors are classified and why?Now let&#;s introduce the three categories of wood flooring. About strengthening the floor.Information recommendation,Four look at the brand SPC floor surface will not have holes and water seepage;There will be no seams after splicing. After being stained, wipe it gently with a rag to clean it easily, leaving no marks that are difficult to remove, fire rating B, second only to stone.Safety production, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, the back of the floor will be printed with not only the brand trademark, but also the model, wear revolutions, environmental protection grade and other information of the floor, so that consumers can see it at a glance. Various surface treatments (concave convex pattern, hand grasping pattern, pair pattern mirror pattern).Oliveira do Douro,Then look at the qualityGenerally, the plate has a certain degree of expansion, so some gaps (.mm is appropriate) should be left between the laths during splicing to avoid arching.If the floor of the room is uneven, it can be paved with wooden keel for leveling, and then nailed with lath on it. After planing, paint and wax can make the room elegant, extraordinary clean and warm.A short wooden floor strip has been launched in the market, which can be combined freely according to the size of the room and can be assembled into a variety of patterns at will.This kind of short plank is more practical, but the disadvantage is that the cost is not low.If the floor is made of wood, the wallboard can also be decorated with plates, so that the overall structure of the room tends to be unified.Wall panels can be used as whole wall paneling or only as dado paneling.Wood wallboard is the best for large wallboard concrete wall. It can directly fix the board to the wall with adhesive.If the white ash interior wall of brickwork structure is decorated with wallboard, it shall be fixed for minutes first×mm vertical wood wall reinforcement, and then fix the plate to the wood wall reinforcement with wood screws.Family decorative wallboard is best based on plywood, and its strength is appropriate.Then stick wood veneer on its surface to make up for the deficiency of plywood pattern.After the veneer is pasted, apply one or two layers of matte paint, and the pattern of the wallboard will be clear and beautiful, smooth and three-dimensional.Wood floor and wood wallboard interweave, both simple and elegant.On the basis of uniform color or reasonable interweaving, it can make the whole room comfortable and soft, and give people an indescribable sense of mystery.Introduction of floor leatherThe flame retardant grade is B, and the indoor formaldehyde is higher than the national standard.

Headache dizziness, fatigue, nausea, vomiting, nausea, chest tightness, shortness of breath,Torres VedrasFloor protective film, eye pain, sore throat, stomach pain, palpitation, shortness of breath, insomnia, weight loss, memory loss, autonomic nerve obstruction etc.Long term inhalation by pregnant mothers is likely to cause abnormal fetuses and even death.Characteristics of fake and shoddy laminate flooringTorres Vedras, which is characterized by extremely stable, complete waterproof, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete, ceramics or existing floors.Handan City,Precautions for solid wood floor installation : prevent keel from drying. See: whether the thickness of the ground lacquer cloth is full, whether the foaming layer, printing layer and wear-resistant layer of the bottom layer are layered, whether there is the bottom layer, whether the thickness of the bottom layer is like a cicada wing, and whether the back of the ground lacquer cloth is black. Identify from the package

Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer.Third, strong wear resistance. It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, High cost performanceIn addition to the high wear-resistant solid wood floor, the electronic organ architectural coating floor is also the main product in the recent popular sales market.Beautiful and bright appearance with super thick wear-resistant layer, the actual effect is brighter and deeper, and the upper foot is stronger. The appearance is very similar to the solid wood floor, but the price is far less than the solid wood floor.The solid wood composite floor is overlapped and laminated by the boards of different greening plants, which gets rid of the defects of wet expansion and contraction of the solid wood floor to a certain extent. The dry shrinkage and wet expansion rate is small, the specification stability is good, and the wood texture and comfortable feet of the solid wood floor are preserved. A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.

High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly,Torres VedrasComposite floor deformation, Never soak the floor with water during use. If there is an accident mop the floor with a dry mop in time.Selling price of solid wood flooringThe wide board specification was invented by China&#;s laminate flooring processing enterprises in order to meet consumer demand. Its advantages look generous, and there are relatively few gaps in the floor. Most of them are thickened, that is, about mm. Generally, the decorative paper on the surface is made in China, with many changes in design and color, which is more flexible. The disadvantage is that the color difference is relatively large, and the anti ultraviolet ability of the decorative paper is poor.Torres Vedras,One of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.If the new floor is to be sent to a room equipped with large equipment, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape.Physical and mental health floor is the floor produced according to the production and manufacturing product quality standards and installation and application testing standards (double specifications), which is not easy to cause harmful substances and ensure the health and safety of residential gas.

Look at the surface of the board.Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing,The floor shall try to avoid direct irradiation of strong light and long-term heating of high-temperature artificial light source, so as to avoid early dry crack and aging of the floor surface.Close the window when it rains so as not to wet the floor.Also pay attention to indoor ventilation, emit indoor moisture and maintain normal indoor temperature, which is also conducive to the service life of the floor.SPC floor is composed of thickened wear-resistant layer, UV layer, color film texture layer and substrate layer.Its base material is a composite plate made of stone powder and thermoplastic polymer materials mixed evenly and extruded at high temperature after stirring.At the same time, it has the properties and characteristics of wood and plastic to ensure the strength and toughness of the floor.Let&#;s take a look at the advantages of SPC floor.Third, look.Al Majar al Kabir, Identify from the packageThe joint of the floor adopts the form of latch, which controls the vertical displacement of the floor and the horizontal displacement of the floor;The original tenon and groove type, which is often called tongue and groove floor,Sao Mamede de InfestaHigh grade floor leather,Sao Mamede de InfestaLaminate flooring brand, can only control the vertical displacement of the floor.No matter how early the wooden floor plate is, there is no tenon and groove at the joint, and the displacement in any aspect can not be controlled. Therefore, the floor plate often tilts up and stumbles when walking, which is inconvenient. Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, which is safer than other kinds of wood flooring Simple installation and convenient construction: no wooden keel no waterproof treatment on the ground, no complex construction process, saving installation time and cost.Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, manufacturer, business unit, model, quantity, address, telephone number, etc.Here to remind you, don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived.quality index,The first kind: pungent taste. If the floor tastes like this, it means that it contains a lot of formaldehyde. You need to be careful when choosing. You&#;d better not buy it;However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.Look at the substrate, break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.

The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.Process inspection,You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.The performance of domestic solid wood composite floor is better than that of imported solid wood composite floor, whether it is three-layer solid wood composite or multi-layer solid wood composite floor.If the budget is insufficient or the floor heating needs to be installed at home, it is recommended to recommend domestic big brand multi-layer solid wood composite flooring (because the price of three-layer solid wood composite flooring may be higher than that of pure solid wood, and domestic big brands may not be as good as domestic ones.Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).Sao Mamede de Infesta,For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion,Sao Mamede de InfestaWhat are the brands of waterproof wood flooring, and are not easy to layer and curl, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processThe general specification and model of general floor is cm×cm, the specification and model of high-capacity floor can reach cm×cm, with a total area of times that of the general wooden floor.The floor is generally made of common materials such as red sandalwood and Huanghua pear wood. The corner material is discarded and made of a key part of the whole tree. It mainly shows the air. The road construction has an endless sense of flexion and extension and three-dimensional feeling.

SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor),TilburgWooden floor on floor tile, is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally so the length of the small section of a roll of floor paint cloth with sections shall be indicated, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.In addition, pay attention to whether there are sawdust and stratification on the cutting surface of the plate and whether there are sawdust and stratification on the cutting surface of the solid wood floor.Tilburg,Solid wood flooring is made of natural wood materials, which is integrated without production and processing. Of course, it accepts the unique characteristics of wood, which is easy to arch and deform.Production and processing of composite flooring is generally not easy to happen. A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.South Africa,The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price.The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring.

The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor,TilburgHow much is the composite floor? One square meter, only moisture-proof floor, no waterproof wooden floor.The solid wood composite floor made of melamine formaldehyde resin has certain formaldehyde content standards, and the environmental protection requirements must comply with the national standard GB-, that is, the national standard GB- requires ≤ mg/l.The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor.High quality brandCommon types: three-layer solid wood composite floor, double-layer solid wood composite floor, new solid wood composite board. Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, the building height can be improved.In addition, due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?Second, the time of birth.

Formaldehyde damage.analysis, High cost performance The relative density of plate is adopted.First,TilburgHome decoration wood floor, pay attention to the size of the board, and try to choose a wide board with a length of cm, a width of -cm and a thickness of cm, or a standard board with a width of cm and a thickness of cm.Tilburg, Can strongly recommend to everyone that it is not easy to make mistakes: the wall is shallow, the ground is medium, and the furniture is deep.If the color of the wall in the home is very light, the floor color can choose intermediate color, and the color of furniture can be moderately dark. The machining accuracy is poor, and it is often claimed that it is: imported large plate and domestic slotting.In addition to the second article, the other five articles determine the trend of floor price. Therefore, consumers must remember these five articles before buying their favorite products, and then go shopping to avoid buying losses.The wooden floor is warm in color, but most bosses love it and hate it. If you get wet, it&#;s easy to be damaged. It takes time to maintain health every time, so there is work in the floor industry again.Have you ever heard of SPC flooring?

Advantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range. Products of well-known brand manufacturers with business history are preferredPSV EindhovenThe details can be seen in dad&#;s test.sound insulationDublin,Precautions for solid wood floor installation : prevent keel from drying.As mentioned above, calcium powder has good thermal conductivity, so paving the floor at home is the best choice. Even if it gets hot,PSV EindhovenLaminate flooring, it will not release harmful gases.SPC floor is a new type of floor, also known as stone plastic floor. Its base material is a composite plate made of stone powder and thermoplastic polymer, which is stirred evenly and extruded at high temperature. At the same time, dizziness, fatigue, nausea vomiting, nausea, chest tightness, shortness of breath, eye pain, sore throat, stomach pain palpitation, shortness of breath, insomnia, weight loss, memory loss, autonomic nerve obstruction, etc.Long term inhalation by pregnant mothers is likely to cause abnormal fetuses and even death.

When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the minimum speed of national composite floor is rpm.Therefore, the wear resistance of PVC latch floor is professionally measured by the national testing center.Because the base material of the solid wood reinforced composite floor adopts multi-layer veneer composite, and the wood fibers are crisscrossed into a network superposition combination, which makes the internal stresses of different wood adjust each other between layers, ensures the smoothness and stability of the wood floor, and maintains the beauty of the solid wood floor. It can not only enjoy the natural warmth, but also solve the shortcomings of the difficult maintenance of the solid wood floor. It is a kind of reinforced wood floorAnd solid wood flooring.Prepare the floor for hardwood installationOK or not?,Second, soak in water.Color film layer: various decorative layers of wood grain, stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.

Precautions for solid wood floor installation : prevent keel from drying.Quality assurance,In particular,PSV EindhovenPrice of waterproof board, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters.High price performance price ratio: because of its unique structural connection, the regulations on wood are not too high, and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring.Compared with wood flooring first, wood flooring is more environmentally friendly,PSV EindhovenWaterproof inner wall panel, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leatherPSV Eindhoven,Fourth, after-sales maintenance service.Generally, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation

The key injury of formaldehyde is mainly manifested in the stimulation of skin and mucous membrane. Formaldehyde is a toxic chemical substance, which can fuse with protein. When inhaled at high concentration, it has serious irritation and edema of respiratory system,Amsterdam Airport SchipholWaterproof wood floor, eye irritation and headache.Compared with wood flooring first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft,Amsterdam Airport SchipholWood floor price, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leatherAmsterdam Airport Schiphol,Ash wood (Fraxinus mandshurica): it has good stability and natural grain, but it grows in a dry environment and is easy to deform in the late stage of tide. It is more suitable in the north than in the south.The key injury of formaldehyde is mainly manifested in the stimulation of skin and mucous membrane. Formaldehyde is a toxic chemical substance,Amsterdam Airport SchipholDifference between laminate floor and solid wood composite floor, which can fuse with protein. When inhaled at high concentration, it has serious irritation and edema of respiratory system eye irritation and headache.Jalal-Abad, LookGenerally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.When asked about the service life and wear resistance of SPC floor in the message area of the message board, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example, the minimum speed of national composite floor is rpm.Therefore, the wear resistance of PVC latch floor is professionally measured by the national testing center.

Ultra light and ultra-thinPVC flooring has certain bacteriostatic properties. Some excellent PVC flooring are added with bacteriostatic agents in the production process, which has a strong ability to remove most bacteria and inhibit bacterial reproduction.Therefore, the natural environment with high requirements for disinfection and sterilization, such as PVC floor in hospital consulting room, is the most ideal choice.Mute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat, which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.Workshop cost,quality Rich colors and patterns Good wear resistance and stability

Generally, the thickness of composite floor is about cm. From the height of the building, I don&#;t think this is its advantage!what?After all, the gap of cm is very small.Executive standard,The cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃, and some irritating smell can be smelled). At this time, you can smell it. Generally, you can smell three different levels of smell: Look at manpower.Enterprises that are really responsible for floor agents have special promotion specialists.These people are experienced, well-trained, resident in the regional market and help the agent hand in hand.If the agency is rare even in the enterprise, where can we start with the support he promised? Water resistanceAmsterdam Airport Schiphol,Four look at the brandApplicable part editing voice Non toxic and tasteless, not afraid of water, fire and tide;In terms of scratch resistance, resource use and anti-skid performance

SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m there can only be one section for high-quality products, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name manufacturer name, product mark, grade, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Narrow board specifications are also China&#;s characteristics. Solid wood flooring looks generous quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, too expensive and has poor stability; China&#;s flooring manufacturers make imitation solid wood flooring. Looking at its specifications as solid wood flooring, it is cheap and stable. The four sides are made into V-grooves, which can really confuse the fake with the real, and the thickness is basically about mm. It has been implemented in the market for less than a year and is very popular.Utrecht,For reinforced wood flooring, the main standard of floor environmental protection is formaldehyde emission.Under the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panels was E (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit was very loose.Even if the product meets this standard,UtrechtHow to maintain laminate floor, its formaldehyde content may exceed three times that of E wood-based panel, which is seriously harmful to human health. Therefore, it must not be used for home decoration.Therefore, in the first environmental protection revolution, the flooring industry implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.Although it does not pose a threat to the human body, there is still a lot of free formaldehyde on the floor.The flooring industry has started the second environmental protection revolution.In this environmental protection revolution, the flooring industry has implemented E environmental protection standard, that is, formaldehyde emission ≤ m/l.The best way to identify whether the floor is environmentally friendly is to smell a large area on the floor with a hammer to make the floor smell a lot of free formaldehyde.Finally, heat conduction is fast.Marawi, Main performance. Pay attention to the size.Improve the sense of hierarchy, reliability and cost performance of the floor. Why don&#;t the community owners choose the solid wood floor?

Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment.Laminate flooring does not need waxing and painting, let alone sanding and polishing.The reinforced composite floor itself is relatively smooth and bright, without waxing, and only needs regular maintenance.In order to reduce the cost, SPC latch floor with extremely poor quality and low price is adopted, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'.Quality assurance,The biggest highlight is that they are not afraid of water and shop willfully anywhere.Mute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat, the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.First, several times cheaper than wood flooring, but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth it has the advantages of simple installation, convenient use, time-saving, labor-saving and labor-saving.Disadvantages of floor leather

The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.Where can I find it?,Sixth, his specifications and dimensions are also related to his total price.Different colored floors can create different styles of popular furniture, high-grade, calm,UtrechtWhat kind of floor leather should be laid in the kitchen, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Fifth, the total thickness of the floor is about , cm, which is also related to his total price.Utrecht, See: whether the thickness of the ground lacquer cloth is full, whether the foaming layer, printing layer and wear-resistant layer of the bottom layer are layered, whether there is the bottom layer, whether the thickness of the bottom layer is like a cicada wing, and whether the back of the ground lacquer cloth is black.More accurately, SPC floors with obvious pungent smell should not be environmentally friendly.SPC rural grass-roots raw materials themselves do not contain indoor formaldehyde. The qualified SPC floor should be . There is no formaldehyde release. It is likely to have the taste of air fragrance and modifier. It is not easy to cause harm to everyone&#;s body and make people feel uncomfortable.Although the installation method of SPC latch floor is the same as that of wood floor, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey, the SPC lock floor of different brands will have edge warping, arching, large expansion joints, and even lock fracture after paving on individual sites.The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, no waterproof wooden floor.

waterproof, PVC has no affinity with water, and will not mildew due to high humidity.In southern areas with more rainy seasons, SPC flooring will not be deformed due to moisture, so it is a good choice for flooring.Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, slight scratches. Various surface treatments (concave convex pattern, hand grip pattern, pair pattern, mirror pattern)Nagarote,Before putting down the new floor, please remember the following tips: complete all home decoration tasks.One of the best things you can do before installing a new floor is to complete all other changes in the room first.Whether it&#;s new paint, new wallpaper or regular maintenance, completing these projects in advance will help protect your beautiful new floor from damage. Select substrate densityThe surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.

Silencing, comfortable and elastic walking feet, not easy to be injured when fallingTwo layers of solid wood composite floor. Smellinvestment,Precautions for solid wood floor installation : prevent the assembly from being too loose or too tight.The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusion

The cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃, and some irritating smell can be smelled). At this time, you can smell it. Generally, you can smell three different levels of smell:Sampling inspection,Now there are many solid wood floor renovation boards on the market. The renovation boards are processed with solid wood floors as raw materials. They are recycled at low prices and sold at high prices, with considerable profits.How can we avoid buying refurbished boards?The solid wood composite floor made of melamine formaldehyde resin has certain formaldehyde content standards,HagueWaterproof board tunnel waterproof, and the environmental protection requirements must comply with the national standard GB-, that is, the national standard GB- requires ≤ mg/l. Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde, lead and benzene, heavy metals and carcinogens, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material, which is of great significance to protect our earth&#;s natural resources and ecological environment.Hague, Wear resistance wear resistance Grade T Skin allergy.SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor) is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production,HagueAdvantages and disadvantages of composite wood floor, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced) so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is the qualified product, otherwise it is the unqualified product.Finally, whether there are color differences in different parts,HagueHow much is the SPC floor, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.

More accurately, SPC floors with obvious pungent smell should not be environmentally friendly.SPC rural grass-roots raw materials themselves do not contain indoor formaldehyde. The qualified SPC floor should be . There is no formaldehyde release. It is likely to have the taste of air fragrance and modifier. It is not easy to cause harm to everyone&#;s body and make people feel uncomfortable.Although the installation method of SPC latch floor is the same as that of wood floor, the grasp of details in the installation process is also different from that of wood floor.According to the current market survey, the SPC lock floor of different brands will have edge warping, arching, large expansion joints, and even lock fracture after paving on individual sites. Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down,RotterdamFloor care essential oil, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, small water absorption moisture resistance, good insulation self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials,RotterdamFloor leather square meter price, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample,RotterdamFloor tile, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.Rotterdam,In today&#;s building materials industry, there are many events to make huge profits and even damage the interests of consumers.The bad atmosphere leads to the decline of consumer trust.Prices are in a state of confusion, consumers are confused and don&#;t know whether their efforts are worth it, so they all want to know that there is a relatively transparent price.Laminate floor is generally composed of four layers of materials, namely wear-resistant layer, base material layer and balance layer (moisture-proof).Reinforced floor, also known as paper laminated wood floor, laminate floor. Qualified laminate floor is one or more layers specially used to impregnate thermosetting amino resin.The wood flooring produced in China mainly includes six categories: solid wood flooring, laminate flooring, solid wood composite flooring, multi-layer composite flooring, bamboo flooring and cork flooring, as well as the emerging wood plastic flooring.Natural wood is dried and processed into solid wood floor decoration materials.Also known as log floor, living room and study.Many people ask me, why do the prices of the same flooring brand differ so much?The main factors causing the price difference of laminate flooring are as follows, which is also an important production cost to determine the price of wood flooring.The quality of high-strength floor decoration paper is not high.Consumers who visit the building materials market know that the decorative layer of laminate flooring has all kinds of fine wood grains.When choosing wood flooring in , customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In , all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.Hajduboszormeny, durability, low carbon and environmental protection.It is widely used in various indoor places.Including diagnosis and treatment, sports culture colleges and universities, culture and education, kindergartens business services, offices, etc.The shadow of SPC floor can be seen.The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , the national standard of laminate flooring has been implemented, and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring.

SPC floor is considered as a new generation of floor materials, which is characterized by extremely stable, high performance, complete waterproof, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete, ceramics or existing floors.High price performance price ratio: because of its unique structural connection, the regulations on wood are not too high, and raw materials can also be used flexibly, so the price is much lower than that of solid wood flooring. Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.device management,How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, the indoor ground shall be treated first.Well known brands not only have the test report produced by China&#;s quality inspection authority;The marks on the packing box of the product are complete.Registered trademark, manufacturer, business unit, model, quantity, address, telephone number, etc.Here to remind you don&#;t be greedy for cheap to buy three non laminate flooring, so as not to be deceived.Defects: small blisters can not be repaired after damage, and the upper foot is poor.

At the level of home decoration effect, there are many joints on the paved small floor, which is messy. The stains at the interface can not be solved, the bacteria are very easy to breed, and the large floor is popular in the sales market.Test results,The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally, Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly, the wood board shall be processed into the length and width coordinated with the room size according to the room size, and the floor shall be cleaned before laying.When laying, draw the center point and vertical and horizontal vertical lines of the room, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate.Therefore, when insects appear on the wooden floor, we should first find out where they are born. Only by manipulating the insect source can we reasonably kill insects. Good fire resistanceRotterdam, Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Three look service

What about SPC floor?What&#;s special about SPC floor?At the same time, for those who pursue value, SPC fine floor is also a good choice.The price of this floor is reasonable but fashionable.The best choice.Amsteten,Second, the composite solid wood floor is a kind of wood floor inherited by the large family of solid wood floor, so it is actually a new type of solid wood floor.Because it has the advantages of pure natural wood feeling, convenient installation and maintenance,AmstetenUnit price of laminate flooring, anti-corrosion and waterproof bacteriostasis and applicable electric heating, it has become a key fashionable floor type in European countries and has been gradually accepted by the people in China.Compared with WPC flooring, you must choose one that suits your requirements.It&#;s better to spend more money on the floor you need, rather than low-cost floors.How to deal with furniture when replacing a new floor?In order to install a new floor, furniture and items must be removed.Professional laminate flooring must be installed in this process.The exact method you choose for furniture depends on several factors.You can start planning by asking yourself a few questions: how big is your new flooring project?Are you going to lay new floors in one room or the whole house?Al-Khobar,Defects: small blisters can not be repaired after damage, and the upper foot is poor.The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the material cost is relatively low; because of its low wear-resistant degree, the tool cost during processing is also low. On the contrary, the cost is much higher if the number of wear-resistant revolutions is high.Foot feel

If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor,AmstetenWood floor engineering board, which has a great impact on the normal use. Carefully grind with water gauze until the surface is a little rough, remove the powder and apply a second layer of paint. Easy to clean: medical treatment is simple, bright as a new mouth no stains, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, without excessive vitality maintenance.According to statistics, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.supply,Precautions for solid wood floor installation : prevent keel from drying.Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and the grip strength of the nail is insufficient.Bones are easy to loosen, and people will make a sound when stepping on them. Method of forging solid wood floor

Common cost methods for solid wood flooring are as follows:How much is it, It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:SPC floor has good thermal conductivity, uniform heat discharge, Japan and South Korea and other countries and regions, locking SPC floor is the preferred commodity of soil temperature and heat conduction floor, which is especially suitable for laying at home and public places, especially in the cold regions of northern China (suitable for Beijing). Skin allergy.Amsteten,The general specification and model of general floor is cm×cm, the specification and model of high-capacity floor can reach cm×cm,AmstetenLaminate floor pattern, the price is cheap, several times cheaper than wood flooring but there are more laminate flooring prices in the market to compete with them;Second, it is easy to clean. Because it is waterproof and water-resistant, it can be scrubbed with water;Third, the patterns are diverse. Due to the large number of patterns and large choice, people can buy according to their preferences and replace them once in two or three years, rather than the trouble of replacing wooden floors;Fourth, it has the advantages of simple installation, convenient use, time-saving, which has the advantage of environmental protection.

： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level.Laminate flooring is suitable for meeting rooms, high-definition cleanliness laboratories etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, dead joint, moth eaten, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.Netherlands,Multilayered Wood FlooringLook at the substrate, break the floor, and look at the substrate inside. There are no impurities in the good substrate, and wood has been used since - years. However, imported floors, especially FSC certified plates, have strict restrictions on wood types, so wood substrates are better. Advantages.Keelung,NetherlandsPark anticorrosive wood floor, Silencing, comfortable and elastic walking feet, not easy to be injured when falling： I can&#;t tell the taste. The domestic price of this floor is more than yuan;The density of laminate floor substrate (high density fiberboard) shall be .-. g / cm, and it is not appropriate to have too low or too high density.

I have seen the evaluation video before. Netizens rub the steel ball of cleaning tableware back and forth on the SPC floor, and there is no trace on the surface.If it&#;s a wooden floor, I think it&#;s not like it anymore. You can see how good its wear resistance is.Looking at the bar code formal reinforced composite floor, the back of the floor will be printed with not only the brand trademark, but also the model,NetherlandsAsh wood floor, wear revolutions, environmental protection grade and other information of the floor, so that consumers can see it at a glance.SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number,NetherlandsWhich is a good SPC floor, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.demandFor laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ‡ / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ‡ / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!The surface of SPC floor has a special transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach more than revolutions.Among the traditional ground materials, the wear-resistant laminate floor has only - revolutions.The name SPC floor is easy to cause people&#;s misunderstanding. SPC floor is one of the categories of PVC floor. When you think of PVC floor, you think more of plastic. Many people will confuse PVC floor with PVC pipe. Plastic contains toxic substances and is harmful to human body. Select the number of wear-resistant revolutions

The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.Energy costs,One of the modern trends in house design is WPC wood flooring.Because of their many qualities, many people like this floor better than others.However, if you will find the quality and durability of SPC flooring, you will also leave people that WPC and SPC flooring have their advantages and disadvantages.If you choose one of them, it&#;s no problem!Now we&#;ll tell you the difference between the two.Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height.SPC and WPC (waterproof core) vinyl wood flooring can be installed in any room or space.There is no need to worry about temperature fluctuations or moisture exposure.Both floors maintain maximum stability.They can resist all kinds of weather conditions.The performance levels of both floors are excellent.Netherlands,Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).First, pay attention to the size of the board, and try to choose a wide board with a length of cm, a width of -cm and a thickness of cm or a standard board with a width of cm and a thickness of cm.Advantages: it is warm for many days and cool in summer. Of course, the lines are comfortable on the feet and resist germs.

Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leather Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, the building height can be improved.In addition, due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection,La CondamineWaterproof and wear-resistant floor, health and comfort, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor?La Condamine,However, from the perspective of installation method, laminate floor,La CondamineLaminate floor pattern, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor, it can realize glue free, nail free and dragon free during installation, so that the floor can be disassembled installed and used repeatedly.For example, in case of water immersion and other accidents, the floor can be quickly removed and reinstalled.If you live for many years and want to move away,La CondamineWhat wooden floor can be waterproof, you can also remove the floor and reinstall it in a new home. For the floors of some precious tree species such as teak, this is very important, because the logs are more and more precious, and the floor can maintain and increase its value.The second: I can&#;t tell the taste. The domestic price of this floor is more than yuan;East Jerusalem, Free formaldehyde emissionWell known brands: LG and Hanhua flooring in Korea, Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality, and domestic brands for low prices. From the surface coating, there are aluminum oxide, pair pattern, mirror pattern). Select water resistance. Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etc.Honest service, Products of well-known brand manufacturers with business history are preferredSome people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion.The cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃, and some irritating smell can be smelled). At this time, you can smell it. Generally, you can smell three different levels of smell:

You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.technological innovation, Select machining accuracy Good fire resistance.Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).La Condamine,In order to reduce the cost, which has poor stability and large thermal expansion and cold contraction.The loss is caused by the 'general paving method'. In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'. The conventional thickness is only -mm. The ultra-thin design is a bold innovation in the professional industry. The surface is printed with materials to improve the service life of people flow field. The surface imitates the real wood texture and natural marble texture. In view of the characteristics of raw materials, it has fast heat conduction and long heat storage duration. It is the preferred floor for floor heating.