Hi! this isShandong Taigang Stainless Steel Products Co., Ltd'S microblog, immediately open and listen to his latest developments!

Industrial MicroblogWhether it is called Weibo or sticky notes, these small voices recorded here will become unforgettable memories. Here, you can send messages anytime, anywhere through mobile phones, web pages, etc., and see friends all the time. attentionShandong Taigang Stainless Steel Products Co., LtdThe latest news.

Shandong Taigang Stainless Steel Products Co., Ltd(@717HP127443542)
User offline

http://www.ilovebotdf.com/?717HP127443542

male,山东省 济南市

86 13861882926

  1. NuevitasWatch stainless steel mesh beltRunning-in and maintenance

    Using CrO and hsoho as the main components and adding an appropriate amount of mnso.ho coloring solution, the chemical coloring of stainless steel industrial pipe was carried out. The effects of pretreatment process, coloring solution temperature, mass concentration and coloring time on the color film of stainless steel industrial pipe were discussed. Through a large number of experiments, a good formula and process range of coloring solution are obtained. With the increase of temperature and time, the film thickness increases, and the color changes are brown, blue, gold, purplish red and green. After curing and sealing treatment, the colored film of stainless steel industrial pipe has more uniform surface color, good reproducibility, and significantly improved wear resistance and corrosion resistance.All steel with openings at both ends and hollow sections, and with a large ratio of length to section perimeter, can be called steel pipe. When the ratio of length to section perimeter is small, it can be called pipe section or tubular fittings which belong to the category of pipe products.Nuevitas,Stainless steel tube toxic chromium and nickel is not bad for you? Stainless steel contains a lot of chromium and nickel. Why is stainless steel still? The following Tianjin stainless steel pipe factory will answer for you: food grade stainless steel pipes will be corroded into spots for a long time if they are not soaked in acid (vinegar) and salt for a long time. Good stainless steel is a model and never rusts.When the addition of chromium reaches %, the atmospheric corrosion resistance of steel increases significantly, but when the chromium content is higher, it is not obvious. The reason is that when alloying steel with chromium, the type of surface oxide is changed to be similar to that formed on pure chromium metal. This tightly adhered chromium rich oxide protects the surface from further oxidation. This oxide layer is very thin. Through it, which makes the stainless steel have a unique surface. Moreover, if the surface layer is damaged, the steel surface will react with the atmosphere to repair itself, re form this passive film and continue its protective effect.Puyo, which is very fast and simple, and is suitable for rapid and nondestructive qualification test of stainless steel pipes. For stainless steel pipes with inner diameter of more than mm and wall thickness of more than mm, Rockwell hardness tester shall be used to test HRC hardness. Stainless steel pipes For stainless steel pipes with inner diameter greater than mm and wall thickness less than mm, the surface Rockwell hardness tester shall be used to test HRT or hrn hardness. For stainless steel pipes with inner diameter less than mm and greater than mm, the special Rockwell hardness tester for pipes shall be used to test hrt hardness. When the inner diameter of stainless steel pipes is greater than mm, the Rockwell or surface Rockwell hardness tester can also be used to test the hardness of pipes.Vickers hardness stainless steel pipe Vickers hardness test is also an indentation test, which can be used to determine the hardness of very thin metal materials and surface layers. It has the main advantages of Brinell and Rockwell methods and overcomes their basic disadvantages, but it is not as simple as Rockwell method. Vickers method is rarely used in steel pipe standards.Stainless steel seamless steel pipe for fluid transportation (instead of gbt- instead of gbt- instead of gb-)


    NuevitasWatch stainless steel mesh beltRunning-in and maintenance



    Proper heat treatment process can prevent intergranular corrosion and obtain excellent corrosion resistance.Allowable depth of straight track: hot rolled and hot-rolled steel pipes with diameter less than or equal to mm shall not be greater than % of the nominal wall thickness, and the large depth shall not be greater than .mm.Because stainless steel has many ideal properties required by building materials, it can be said to be unique in metals, and its development continues. In order to make stainless steel more neutral in traditional applications, existing types have been improved,Nuevitas2205 duplex stainless steel pipe, and new stainless steel is being developed to meet the strict requirements of advanced architectural applications. Due to the continuous improvement of production efficiency and quality, stainless steel has become one of the cost-effective materials selected by architects. Stainless steel integrates performance, appearance and use characteristics, so stainless steel will still be one of the best building materials in the world.originalHousehold worries.Austenitic stainless steel has good resistance to uniform corrosion, but there are still the following problems in local corrosion resistance: intergranular corrosion of austenitic stainless steel. Austenitic stainless steel will have intergranular corrosion when it is kept warm at ~ ℃ or cooled slowly. The higher the carbon content, the greater the tendency of intergranular corrosion. In addition, intergranular corrosion also occurs in the heat affected zone of the weldment. This is due to the precipitation of Cr rich CrC on the grain boundary. The chromium poor area is formed in the surrounding matrix, which is caused by corrosion of the primary cell. This intergranular corrosion phenomenon also exists in the ferritic stainless steel mentioned above.The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, which has strict requirements on the chemical composition and temperature of molten steel; In order to prevent secondary oxidation of molten steel, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, nozzle and submerged nozzle.


    NuevitasWatch stainless steel mesh beltRunning-in and maintenance



    Duplex stainless steel product description: This stainless steel has good corrosion resistance in urea carbamate solution and high stress corrosion cracking resistance in chloride environment. At the same time the duplex stainless steel has excellent mechanical properties and can be used in plant construction with high safety requirements.Quality documents, which was consumed and used at the end of the s, is a rebirth group emerging in today's pipe range. It has been widely used in the construction of water supply and direct drinking water pipelines. Stainless steel pipe is durable and has been recognized by the engineering community, and relevant parties are starting from reducing wall thickness and money, so as to facilitate further implementation. In order to promote stainless steel pipe, since the s, China has started to reduce wall thickness and cost; High diameter to wall ratio and high precision & rdquo; The technical effect of stainless steel pipe makes the stainless steel pipe lose its application and expand quickly. There are various connection modes of stainless steel pipes. The rare types of pipe fittings include contraction type compression type, union type, push type, push thread type, socket welding type, union flange connection, but most of them are convenient, firm and reliable. The sealing ring or gasket materials used for connection are mostly silicone rubber, nitrile rubber and EPDM that meet the requirements of national specifications, which eliminates the worries of users. In the construction of water supply pipe system, due to the glorious history of galvanized steel pipe, all kinds of new plastic pipes and composite pipes have been lost and developed rapidly, but they are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. In direct drinking water, stainless steel pipe system is undoubtedly one of the best. At present,Nuevitas2mm stainless steel plate, hotels and public places at the international level have been equipped or are equipped with direct drinking water pipelines. In many cases, stainless steel pipe has more advantages, especially the stainless steel pipe with wall thickness of only . ~ mm has the characteristics of safety, reliability, environmental protection, economy and applicability in high-quality drinking water system, hot water system and water supply system that puts safety and sanitation first. It has been proved by engineering theories at home and abroad that it is not only one of the new, energy-saving and environmental protection pipes with good comprehensive function of water supply, but also a very competitive water supply pipe, which will play an unparalleled role in improving water quality and improving people's living standard.Prepare materials and tools, prepare corresponding materials and tools, and check whether they match and apply.Low temperature embrittlement of stainless steel pipe --- in low temperature environment, the deformation energy is small. In low temperature environment, the phenomenon of reduced elongation and area shrinkage is called low temperature embrittlement. It is mostly produced on the body centered cubic structure of ferrite series.Nuevitas,Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method, the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, energy spectrometer, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel belt, stainless steel pipe, high price, service, on-site settlement, honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore, this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation, silicon treatment and the combination of citric acid passivation and acid silicon system treatment, and discusses the corrosion resistance mechanism of different films on its surface, which can provide reference for the new direction of stainless steel surface treatment, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film, but also benefits from its double-layer film structure.The scale pretreatment of stainless steel pipe makes the scale loose, and then acid pickling is carried out for easy removal. The pretreatment can be divided into the following: alkaline salt melting treatment method. The alkaline melt contains % hydroxide and % salt. The proportion of the two in the molten salt shall be strict, so that the molten salt has strong oxidizing power, low melting point and small viscosity. Only the sodium halo shall be analyzed in the production process, and the content shall not be less than % (wt) It is treated in a salt bath furnace at ~ ℃ for minutes for ferritic stainless steel and minutes for austenitic stainless steel. Similarly, iron oxides and spinels can also be oxidized by salt to become loose ferric oxide, which is easy to be removed during acid pickling. Due to the action of high temperature, some of the formed oxides peel off and sink to the furnace bottom in the form of sediment. Alkaline salt melting pretreatment Process flow: steam degreasing → preheating ( ~ ℃, time ~ min) ↠ molten salt treatment & rarr; water quenching & rarr; hot water washing. Molten salt treatment is not suitable for assemblies with weld gap or crimping. When the parts are taken out of the molten salt furnace, a stream of alkali and salt mist will be splashed during water quenching, so deep well anti splash water quenching tank shall be used during water quenching. During water quenching, firstly lift the parts basket into the tank, stop above the horizontal plane, close the tank cover, and then lower the parts basket into the water Professional L stainless steel pipe, s stainless steel pipe and L stainless steel pipe are stable, safe, reliable and maintenance free. The technical level has reached the domestic level and the international advanced level of similar products until submerged.As long as the steel type is selected correctly and maintained properly, stainless steel will not produce corrosion, pitting, corrosion or wear. Stainless steel is also one of the high-strength materials in metal materials for construction. Because stainless steel has good corrosion resistance, it can ensure that the structural components can maintain the integrity of engineering design. Chromium containing stainless steel also integrates mechanical strength and high extensibility and is easy to wear The processing and manufacturing of parts can be full

    4An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  2. Jaguey-GrandeStainless steel mesh belt conveyorUse in hydraulic machinery

    High frequency welding high frequency welding: with relatively high power supply, it can reach a higher welding speed for steel pipes with different materials, outer diameter and wall thickness. Compared with argon arc welding, it is difficult to remove burrs in welded pipes. At present, high frequency welding Welded stainless steel pipe can not be borne by chemical and nuclear industries, which is also one of the reasons.AUSTENITIC FERRITIC duplex stainless steel on the basis of austenitic stainless steel, appropriately increase Cr content and reduce Ni content, and cooperate with remelting treatment. High prices, various specifications of stainless steel plates, stainless steel coils, stainless steel belts and stainless steel tubes are supplied in time and cost-effective. It has become the preferred brand for many wire products. Welcome to buy! Stainless steel with duplex structure of austenite and ferrite (including ~ % & Delta; - ferrite) can be obtained. Typical steel grades include crniti, CrNiTi, ocrnimoti, etc. Duplex stainless steel has good weldability, no heat treatment is required after welding, and its tendency of intergranular corrosion and stress corrosion is also small. However, due to the high Cr content, it is easy to form & sigma; Pay attention when using.Jaguey-Grande,Let PS be the external force at the yield point s and fo be the cross-sectional area of the sample, then the yield point & sigma; S = PS / fo (MPA), MPa is called MPa, equal to n (Newton) / mm (MPA = pa, PA: Pascal = n / MSection shape stainless steel pipe can be divided into round pipe and special-shaped pipe according to the section shape. Special shaped tubes include rectangular tubes, rhombic tubes, elliptical tubes, hexagonal tubes, octagonal tubes and various cross-section asymmetric tubes. Special shaped pipe is widely used in various structural parts, tools and mechanical parts. Compared with circular pipe, special-shaped pipe generally has large moment of inertia and section modulus, and has large bending and torsion resistance, which can greatly reduce the structural weight and save steel.Sabatz,Jaguey-GrandeStainless steel column pipe,Jaguey-Grande06cr18ni11ti stainless steel plate, & mdash; high strength cutting tool steel, with slightly higher carbon content, can obtain higher yield strength after appropriate heat treatment, and the hardness can reach hrc. It is one of the hard stainless steels. A common application example is & ldquo; shaving blade & rdquo;. There are three common models: C and f (easy processing type).Several kinds of stainless steel backing welding used for stainless steel backing welding usually adopt TIG process. According to the actual situation of the site, professional L stainless steel pipe, s stainless steel pipe, L stainless steel pipe and other special products, old brands, with advantages in price and guaranteed quality. We can use the following four kinds of backing welding.When hoisting stainless steel pipes, public slings, such as hoisting belt and public collet number, shall be used. It is strictly prohibited to use steel wire rope to avoid scratching the surface; and when hoisting and placing, it shall prevent scratching caused by impact and collision. If there are surface scratches, electric arc traces and surface purification in the process of transportation, storage and processing, it must be completely cleaned, polished with an angle grinder, and then polished Polishing with optical sheet or metallographic sandpaper.


    Jaguey-GrandeStainless steel mesh belt conveyorUse in hydraulic machinery



    The selection of pipes and fittings for welding data preparation shall be based on the quality elements of the application environment, and the commodities of corresponding grades shall be selected to ensure the weld metal structure and machine function.L stainless steel pipe has become a very popular material in the market because of its many advantages. Today Xiaobian will tell you in detail about L stainless steel pipe installation technology.Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently, citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method, the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, energy spectrometer, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel belt, stainless steel pipe, high price, service, on-site settlement, honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore, this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation, silicon treatment and the combination of citric acid passivation and acid silicon system treatment, and discusses the corrosion resistance mechanism of different films on its surface, which can provide reference for the new direction of stainless steel surface treatment, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film, but also benefits from its double-layer film structure.Packaging strategy,Welding of stainless steel pipe argon arc welding stainless steel pipe: it is required to have deep penetration, no oxide inclusion, and the heat affected zone can be as small as possible. Argon arc welding maintained by tungsten inert gas has good compliance, high welding quality and good penetration function. Its commodities are widely used in chemical, nuclear and food industries.Continuous casting shall be adopted for stainless steel pipe fittings, so as to improve the comprehensive yield, which significantly improves the production efficiency, there are requirements for the service environment of stainless steel, it is used for - steel containing Ti and Nb in the solid solution treatment line. After the solid treatment, the steel is heated to ~ ℃ for heat preservation and air cooling. At this time, the carbides of Cr are completely dissolved, while the carbides of titanium removal are not completely dissolved, and they are fully precipitated during the cooling process, so that it is impossible for the carbon to form chromium carbides again. Professional L stainless steel pipe, Guarantee service. Guarantee quality. Your satisfaction is our pursuit! Welcome to inquire. Therefore, intergranular corrosion is effectively eliminated.Word of mouth recommendation,;- Ferromagnetism due to m transformation shall be considered in use (such as in instrument parts).Its plastic toughness is lower than that of austenitic stainless steel and its cold and hot working process and formability are not as good as that of austenitic stainless steel.Shape, stress, temperature and metal flow of forgings and dies. Results the multi-step upsetting extrusion process under high temperature can make the end of steel pipe meet the forming requirements. Conclusion the plastic forming process of steel pipe end is feasible, which has important reference significance for the improvement of pipe connection mode of railway freight car braking system.Jaguey-Grande,Continuous casting shall be adopted for stainless steel pipe fittings, so as to improve the comprehensive yield and cooperate with out of furnace refining, which significantly improves the production efficiency, omits the blank opening process and saves a lot of energy consumption.That is stainless steel. The GB brand is CrNi. & mdash; it has better temperature resistance than it.For business people, of course, it is better to spend less under feasible conditions. For goods such as stainless steel pipes, we can often see that there will be packaging film bags on them. Although they are not heavy if there are a large number of single purchases,Jaguey-GrandeCr20Ni80 stainless steel strip, they will also produce certain economic expenses, but why do many people clearly dislike this thing on stainless steel pipes, But I have to accept it. Next, xincoral Xiaobian will tell you why stainless steel pipes need packaging bags.

    6An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  3. San-Jose-de-las-Lajas304 stainless steel with magneticStable performance

    Stress corrosion cracking (SCC) refers to the cracking caused by the combined action of stress corrosion stress (mainly tensile stress) and corrosion of austenitic stainless steel Austenitic stainless steel is prone to stress corrosion in corrosive media containing chloride ions. When the Ni content reaches % - % it is a long-term enterprise engaged in stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe. Welcome to consult. The stress corrosion tendency of austenitic stainless steel is very large. Continue to increase the Ni content to ~ %, and cooperate with out of furnace refining so as to improve the comprehensive yield, which significantly improves the production efficiency, omits the blank opening process and saves a lot of energy consumption.San-Jose-de-las-Lajas,The surface of the steel strip in the state of supply shall be rough or bright. & mdash; high strength cutting tool steel with slightly higher carbon content, can obtain higher yield strength after appropriate heat treatment, and the hardness can reach hrc. It is one of the hard stainless steels. A common application example is & ldquo; shaving blade & rdquo;. There are three common models: C and f (easy processing type).San-Sebastian,High frequency welding high frequency welding: with relatively high power supply, it can reach a higher welding speed for steel pipes with different materials, outer diameter and wall thickness. Compared with argon arc welding, it is more than ten times its high welding speed. Therefore, stainless steel pipes for common use have a higher consumption rate. Due to the high speed of high frequency welding, high frequency welding Welded stainless steel pipe can not be borne by chemical and nuclear industries, which is also one of the reasons.Model & mdash; Except that the risk of weld corrosion of the material is reduced due to the addition of titanium, other properties are similar. Stainless steel decorative pipe, stainless steel pipe, series stainless steel pipe & mdash; Ferritic and martensitic stainless steel model & mdash; Good heat resistance,San-Jose-de-las-LajasDN80 stainless steel pipe, weak corrosion resistance, % Cr, % Ni.Refining and transportation industries are in great demand. Secondly, geological drilling, chemical industry, construction industry, machinery industry, aircraft and automobile manufacturing, boiler, furniture and bicycle manufacturing also need a large number of various steel pipes. With the development of new technologies such as atomic energy, rocket, missile and aerospace industry, stainless steel pipe plays an increasingly important role in national defense industry, science and technology and economic construction.


    San-Jose-de-las-Lajas304 stainless steel with magneticStable performance



    Therefore, the field with high utilization rate of stainless steel with high competitiveness and comprehensive quality will also be an important part of the plan.Han Jianbiao, an analyst at Zoomlion steel,San-Jose-de-las-LajasStainless steel 304 pipe, pointed out that since, China's steel pipe exports have been only or tons per month, of which seamless pipe exports are only about tons per month.Stainless steel pipe factory stainless steel products are widely used in hardware products, furniture, mechanical structure, mechanical accessories, precision medical instruments, fluid transmission pipelines, such as furniture, machinery, medical oil, natural gas, water, gas, steam and other industries.Respect for customers,The product quality advantages of continuous casting billet of stainless steel pipe fittings are mainly reflected in that the non grinding rate of the outer surface of the billet except the head and tail section has reached more than %, and the total surface grinding yield has reached %. In order to achieve this goal it is necessary to refine the molten steel, achieve low oxygen and sulfur content, do a good job in the metallurgy of the ladle and tundish, accurately determine the molten steel temperature, and realize no oxidation casting, Further reduce the inclusion content.This material without titanium and niobium has an inherent tendency of intergranular corrosion. Intergranular corrosion can be reduced by adding titanium and niobium and stabilizing treatment. It is a kind of high alloy steel that can corrode in air or chemical corrosive medium. Stainless steel has beautiful surface and good corrosion resistance. It does not have to undergo surface treatment such as color plating to play a role of rust freeFerritic and martensitic stainless steels are represented by series numbers. Ferritic stainless steel is marked with and , martensitic stainless steel is marked with and C, dual phase (austenite ferrite).


    San-Jose-de-las-Lajas304 stainless steel with magneticStable performance



    Stainless steel, precipitation hardening stainless steel and high alloy with iron content less than % are usually named by patent name or trademark.OK or not?,Application field: tubular boiler for pipeline in harsh seabed environment product description: ultra (ultra) critical unit is the basis of modernization of power generation equipment and energy conservation and emission reduction. Among the important pressure parts of ultra (supercritical) boiler, superheater and reheater are the parts with high working temperature and bad working environment. Previously, all such materials used in China were imported from abroad, expensive import prices, difficult procurement and short supply, which seriously affected the production of ultra supercritical boilers and the development of electric energy in China. At present, China's demand for utility boiler tubes is about tons, and with the continuous improvement of ultra (supercritical) power generation technology, the demand is expanding. Several large domestic enterprises have invested a lot of human and financial resources in the R & D and production of such products, and have made considerable achievements. On the one hand, it has made its own contribution to the development of national electric power industry, carbon oxide and nitrogen oxide), in case of condensed water acetic acid liquid points will be formed, which will lead to chemical corrosion.When the addition of chromium reaches %, the atmospheric corrosion resistance of steel increases significantly, but when the chromium content is higher, although the corrosion resistance can still be improved, it is not obvious. The reason is that when alloying steel with chromium, the type of surface oxide is changed to be similar to that formed on pure chromium metal. This tightly adhered chromium rich oxide protects the surface from further oxidation. This oxide layer is very thin. Through it, you can see the natural luster of the steel surface,San-Jose-de-las-Lajas201 magnetic stainless steel, which makes the stainless steel have a unique surface. Moreover, if the surface layer is damaged, the steel surface will react with the atmosphere to repair itself, re form this passive film and continue its protective effect.San-Jose-de-las-Lajas,The recrystallization temperature changes with the shape variable. When the shape variable is %, the recrystallization temperature drops to ℃, and the recrystallization annealing temperature of cold deformed austenitic stainless steel is ~ ℃. At ℃, it needs to be kept warm for h, fully burned at ℃, there are requirements for the service environment of stainless steel, and it is necessary to remove dust frequently and keep it clean and dry.Only soluble paper or the combination of soluble paper and blocking plate is used for blocking ventilation protection (i.e. solid core welding wire + TIG + water-soluble paper)

    8An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  4. PlacetasNon magnetic stainless steel beltPersist in the pursuit of high-quality products

    Stainless steel seamless steel pipe for structure (instead of gbt-)Flux coated welding wire is used for backing welding, and argon gas is not used inside the weld. The welder's operation is simple and fastPlacetas,If packing is not required, it shall be indicated in the contract and will not bear the problem of scratching and scratching the surface of stainless steel pipe due to opening the packing bag.Brinell hardness in stainless steel pipe standards, Brinell hardness is widely used, and the hardness of the material is often expressed by indentation diameter which is intuitive and convenient. However, it is not suitable for steel pipes with hard or thin steel.Ambanja,Placetas304 stainless steel strip,When using this process, the following key points should be paid attention to: during the welding process, the correct included angle between the welding handle, welding wire and weldment should be maintained. The ideal caster angle of the welding handle nozzle is & deg; & mdash; & deg;, and the included angle between the welding wire and the weldment surface is & deg; & mdash; & deg;; correct the molten pool temperature, change the included angle between the welding handle and weldment, etc. to change the molten pool temperature, so as to ensure Beautiful weld formation (uniform width, no concave, convex and other defects) During operation, the current shall be slightly larger than that of solid core welding wire, and the welding handle shall be slightly adjusted to accelerate the separation of molten iron and molten flux coating, so as to facilitate the observation of molten pool and penetration; when filling the welding wire,PlacetasStainless steel pipe,PlacetasStainless steel plate, and the welding wire shall always be ensured Under the protection of argon to prevent the end of the welding wire from being oxidized and affect the welding quality; pay attention to the welding quality of the arc and arc stop the welding wire shall be regularly sent and taken out, and the spot weld shall be polished to & deg; the slope shall be gentle, and pay attention to the defects such as arc pit and shrinkage hole during arc stop. Series & mdash; Martensitic precipitation hardening stainless steel.As long as the steel type is selected correctly and maintained properly, stainless steel will not produce corrosion, pitting, corrosion or wear. Stainless steel is also one of the high-strength materials in metal materials for construction. Because stainless steel has good corrosion resistance, it can ensure that the structural components can maintain the integrity of engineering design. Chromium containing stainless steel also integrates mechanical strength and high extensibility and is easy to wear The processing and manufacturing of parts can be full


    PlacetasNon magnetic stainless steel beltPersist in the pursuit of high-quality products



    The selection of pipes and fittings for welding data preparation shall be based on the quality elements of the application environment, chemical composition and application pressure, and the commodities of corresponding grades shall be selected to ensure the weld metal structure and machine function.Stainless steel is a very thin, firm, fine and stable chromium rich oxide film (protective film) formed on its surface. It prevents oxygen atoms from penetrating and oxidizing, and obtains corrosion resistance. Once this film is continuously damaged for some reason, oxygen atoms in the air or will continue to separate out, forming loose iron oxide. For a long time, stainless steel plate, stainless steel coil and stainless steel belt will be provided, Stainless steel pipe, an old brand has advantages in price and guaranteed quality! The metal surface is constantly corrodedBidirectional Product Description: the tensile strength of the material is ~ mpa, and the high working temperature can reach ℃.Economic management,No solution treatment. The alloy elements do not dissolve into the matrix, resulting in low alloy content and poor corrosion resistance.Stainless steel, precipitation hardening stainless steel and high alloy with iron content less than % are usually named by patent name or trademark.Stainless steel pipes can be divided into CR series ( Series), Cr Ni series ( Series), Cr Mn Ni series ( Series) and precipitation hardening series ( Series). Series & mdash; Cr Ni Mn austenitic stainless steel series & mdash; Cr Ni austenitic stainless steel.


    PlacetasNon magnetic stainless steel beltPersist in the pursuit of high-quality products



    Stainless steel pipe, which was consumed and used at the end of the s, is a rebirth group emerging in today's pipe range. It has been widely used in the construction of water supply and direct drinking water pipelines. Stainless steel pipe is durable and has been recognized by the engineering community, and relevant parties are starting from reducing wall thickness and money, so as to facilitate further implementation. In order to promote stainless steel pipe, since the s, China has started to reduce wall thickness and cost; High diameter to wall ratio and high precision & rdquo; The technical effect of stainless steel pipe makes the stainless steel pipe lose its application and expand quickly. There are various connection modes of stainless steel pipes. The rare types of pipe fittings include contraction type compression type, union type, push type, push thread type, socket welding type, union flange connection, welding type and derivative series connection mode combining welding with traditional connection. These connection methods have different application ranges according to their principles, but most of them are convenient firm and reliable. The sealing ring or gasket materials used for connection are mostly silicone rubber, nitrile rubber and EPDM that meet the requirements of national specifications, which eliminates the worries of users. In the construction of water supply pipe system, due to the glorious history of galvanized steel pipe, all kinds of new plastic pipes and composite pipes have been lost and developed rapidly, but they are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. In direct drinking water, stainless steel pipe system is undoubtedly one of the best. At present, hotels and public places at the international level have been equipped or are equipped with direct drinking water pipelines. In many cases, stainless steel pipe has more advantages, reliability, sanitation, environmental protection, economy and applicability in high-quality drinking water system hot water system and water supply system that puts safety and sanitation first. It has been proved by engineering theories at home and abroad that it is not only one of the new, energy-saving and environmental protection pipes with good comprehensive function of water supply, but also a very competitive water supply pipe, which will play an unparalleled role in improving water quality and improving people's living standard.Direct labor,Austenitic stainless steel is generally used for manufacturing and manufacturing chemical equipment components, low-temperature equipment components in refrigeration industry, and can be used as stainless steel spring and clock spring after deformation strengthening.Batch size: a small number of single batch products will affect the unit price.Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently, citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method, the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, energy spectrometer, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel pipe, high price, service, on-site settlement, honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore, this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation, and discusses the corrosion resistance mechanism of different films on its surface, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film, but also benefits from its double-layer film structure.Placetas,There shall be a special storage rack. The storage rack shall be a wooden or painted carbon steel support or padded with rubber pad to isolate it from carbon steel and other metal materials. During storage, the storage position shall be convenient for lifting and absolutely isolated from other data storage areas. Protective measures shall be taken to avoid purification, collision with other components, purification and damage of iron metal.Welding, high frequency preheating plus three torch argon arc welding, high frequency preheating plus plasma argon arc welding. The progress of combined welding is very significant. As for the combined welding of steel pipe with high-frequency preheating, the weld quality is equivalent to the conventional argon arc welding and plasma welding, the welding operation is complex, with low investment cost and good benefit.Stainless steel seamless steel pipe for structure (instead of gbt-)

    9An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  5. San-CristobalProduction of stainless steelWhat are the regular testing items
    this has become a necessary means to improve product quality.San-Cristobal,Batch size: a small number of single batch products will affect the unit price.Model & mdash; The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.Umm as Sahik,Model & mdash; After that, the second widely used steel is mainly used in food industry and surgical equipment. Molybdenum is added to obtain a special corrosion-resistant structure. Because it has better chloride corrosion resistance than it, it is also made & ldquo; Marine Steel & rdquo; To use. SS is usually used in nuclear fuel recovery units. Grade stainless steel generally meets this application grade.The protection mechanism of stainless steel backing wire + TIG process is that the back weld is protected by the metallurgical reaction of slag produced by welding wire melting and its alloy elements, and the front weld is protected by argon,San-Cristobal304 stainless steel plate is well planted, slag and alloy elements.The slab solidified on the surface continues to be rapidly cooled through the secondary cooling section until the core becomes solid, and the whole continuous casting process of stainless steel pipe fittings is completed.


    San-CristobalProduction of stainless steelWhat are the regular testing items



    Meet the needs of architects and structural designers.The corrosion resistance of corrosion-resistant stainless steel plate mainly depends on its alloy composition (chromium nickel, aluminum silicon, manganese,San-Cristobal3cr13mo stainless steel plate, etc.) And internal structure, which mainly acts on chromium. Chromium has high chemical stability, can form a passive film on the steel surface, isolate the metal from the outside, protect the steel plate from oxidation and increase the corrosion resistance of the steel plate. After the passive film, the length must be marked and marked at the pipe end.Sales Department,Stainless steel is usually divided into stainless steel pipe, stainless steel pipe and ferritic stainless steel according to the matrix structure. Chromium content % ~ %. Its corrosion resistance, toughness and weldability increase with the increase of chromium content, and its chloride stress corrosion resistance is better than other kinds of stainless steel.Stainless steel, precipitation hardening stainless steel and high alloy with iron content less than % are usually named by patent name or trademark.Vickers hardness stainless steel pipe Vickers hardness test is also an indentation test, which can be used to determine the hardness of very thin metal materials and surface layers. It has the main advantages of Brinell and Rockwell methods and overcomes their basic disadvantages, but it is not as simple as Rockwell method. Vickers method is rarely used in steel pipe standards.


    San-CristobalProduction of stainless steelWhat are the regular testing items



    The domestic prospect is promising, and there is a large demand for building water supply pipes. According to the 'Ninth Five Year Plan' of construction and the outline of long-term objectives in , the demand for each pipe is ~ km from to , including km of cold and hot water pipes in residential construction areas. Some people believe that the development of stainless steel water pipes is of great significance to improve the grade of modern urban buildings.Recommendation and consultation,Model & mdash& ldquo; Cutting tool level & rdquo; Martensitic steel, an early stainless steel similar to Brinell high chromium steel. It is also used for surgical tools, which can be made very bright. Model & mdash; Ferritic stainless steel for decoration, such as automotive accessories. Good formability, but poor temperature resistance and corrosion resistance.The specification and appearance quality shall comply with the provisions of gb- stainless steel seamless steel pipe. The steel pipe is usually ~ m long (indefinite length) hot rolled steel pipe, and the hot-rolled steel pipe is equal to or greater than m. The wall thickness of cold drawn (rolled) steel pipe is . ~ mm, ~ m; the wall thickness is greater than mm, ~ m.When installing and welding the fixed port of stainless steel pipe, it is difficult to vent on the inner side and some sides are easy to be blocked. In this case, water-soluble paper + blocking plate can be used for blocking. That is, the easy to vent and good side can be blocked with blocking plate, the difficult to vent and bad blocking plate side can be blocked with water-soluble paper, and the weld on the outer side can be blocked with adhesive tape (see Table ) .San-Cristobal,Marking: in order to make the steel pipe complete the socket of the pipe fitting, the length must be marked and marked at the pipe end.Model & mdash; General model; stainless steel. The GB brand is CrNi.Austenitic stainless steel. It contains more than % chromium, about % nickel and a small amount of molybdenum, titanium, nitrogen and other elements. Good comprehensive performance and resistance to corrosion of various media.

    10An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  6. TrinidadStainless steel beltBusiness situation

    Welding, high frequency preheating plus three torch argon arc welding, high frequency preheating plus plasma argon arc welding. The progress of combined welding is very significant. As for the combined welding of steel pipe with high-frequency preheating, the welding operation is complex, and the whole welding is easy to complete automation. This combination is easy to connect with the existing high-frequency welding equipment, with low investment cost and good benefit.Continuous casting shall be adopted for stainless steel pipe fittings, so as to improve the comprehensive yield, and cooperate with out of furnace refining which significantly improves the production efficiency, omits the blank opening process and saves a lot of energy consumption.Trinidad,Basic weight (density) / kg of steel plate: SPCC & mdash& mdash; Cold rolled carbon steel sheet and strip are generally used, which is equivalent to qa. The third letter C is the abbreviation of cold. When it is necessary to ensure the tensile test add t at the end of the brand as spcct.Low temperature embrittlement of stainless steel pipe --- in low temperature environment, the deformation energy is small. In low temperature environment, the phenomenon of reduced elongation and area shrinkage is called low temperature embrittlement. It is mostly produced on the body centered cubic structure of ferrite series.Ntungamo,Welding of stainless steel pipe argon arc welding stainless steel pipe: it is required to have deep penetration, no oxide inclusion, and the heat affected zone can be as small as possible. Argon arc welding maintained by tungsten inert gas has good compliance, high welding quality and good penetration function. Its commodities are widely used in chemical nuclear and food industries.Austenitic stainless steel austenitic stainless steel is developed to overcome the lack of corrosion resistance and brittleness of martensitic stainless steel. The basic composition is crl% and Ni%, which is referred to as - steel for short. Its characteristic is that the carbon content is less than .%, and the single-phase austenite structure is obtained by the combination of Cr and Ni.Human factors are also one of the causes of product oxidation that some consumers often encounter when using stainless steel products. Some consumers operate improperly in product use and maintenance, especially some stainless steel pipe products used in food and chemical equipment industry. For the artificially generated oxidation of steel products, they should have correct product use knowledge and Reasonable and effective maintenance shall be carried out regularly to reduce oxidation caused by improper use.


    TrinidadStainless steel beltBusiness situation



    The main control load of the platform has high requirements for the shear bearing capacity of the guide leg of the offshore platform. In order to study the factors affecting the shear capacity of the jacket legs of the stainless steel pipe in pipe concrete-filled steel tubular offshore platform, a total of concrete-filled steel tubular shear members were fabricated to study the effects of outer steel pipe material, concrete strength, void ratio and shear span ratio on the shear capacity of concrete-filled steel tubular in pipe. It is found that the shear strength of members increases with the decrease of void ratio and the increase of concrete strength; The larger the shear span ratio, the smaller the shear strength. Combined with the test the empirical formula of shear capacity of concrete-filled steel tubular in pipe is proposed, which is analyzed and verified by ABAQUS finite element modeling software. The results show that the simulation is in good agreement with the test results. In order to study the axial compression performance of stainless steel tube concrete conduit leg and the axial compression performance of stainless steel concrete conduit leg, experiments are used to verify the correctness of the finite element model. The load displacement curves of specimens in groups were compared, and the effects of different void ratio, concrete strength, diameter thickness ratio and bone index on the axial compression performance of concrete-filled stainless steel tubular short columns under axial compression were analyzed. The results show that with the increase of concrete strength, but the ductility of specimens decreases; With the increase of void ratio and diameter thickness ratio, the bearing capacity of the specimen decreases; The bearing capacity of stainless steel tube concrete can be effectively improved by adding steel bone; Increasing the bone matching index of steel bone can improve the bearing capacity of the specimen. Based on the jacket offshore platform, it is proposed to replace the four hollow steel conduit legs of the original offshore platform with concrete-filled steel tube in stainless steel tube to form a new composite offshore platform with concrete-filled steel tube in stainless steel tube, so as to improve the ice resistance and disaster prevention ability of the offshore platform. The scale test on the offshore platform shows that the composite offshore platform of concrete filled steel tubular in stainless steel pipe (hereinafter referred to as the composite offshore platform) has better anti icing performance than the ordinary jacket offshore platform. Taking push as an example, the peak acceleration and displacement of the upper deck of the composite offshore platform of concrete filled steel tubular in stainless steel pipe are reduced by % and % respectively. The analysis of ABAQUS finite element and experimental simulation results shows that the error of the two results can be basically within %. Through the simulation analysis of the ultimate bearing capacity of the stainless steel tube in tube concrete-filled steel tubular composite platform and the original offshore platform, it can be seen that the stainless steel tube in tube concrete-filled steel tubular composite platform has stronger ultimate bearing capacity. Therefore, the composite offshore platform of concrete-filled steel tube in stainless steel tube is a good new type of jacket offshore platform. Axial compression tests were carried out on austenitic and duplex stainless steel tube concrete short columns. The ultimate load,Trinidad316L stainless steel round pipe, longitudinal strain and circumferential strain of the short columns under axial compression were measured. The effects of steel tube wall thickness and concrete strength on the bearing performance of the short columns were investigated. Reference was made to the European Code for design of concrete filled steel tubes (Eurocode), American code (ACI -) and Japanese code (aij-cft), China's relevant regulations D --dlt- and CECS calculate the preparation of stainless steel pipe construction prepare construction scheme and construction schedule scheme, and establish quality standards.The corrosion resistance of duplex stainless steel, which is widely used in many media, is better than that of ordinary l austenitic stainless steel, while super duplex stainless steel has very high corrosion resistance. In some media, such as acetic acid and formic acid, it can even replace high alloy austenitic stainless steel and even corrosion resistant alloy.Refining and transportation industries are in great demand. Secondly, geological drilling, chemical industry, construction industry, machinery industry, aircraft and automobile manufacturing, boiler, medical equipment, furniture and bicycle manufacturing also need a large number of various steel pipes. With the development of new technologies such as atomic energy, rocket, missile and aerospace industry, stainless steel pipe plays an increasingly important role in national defense industry, science and technology and economic construction.How many?,Application field: launch the market plan of stainless steel pipe in the target market of new products, such as stainless steel kitchen equipment.. Raw material problem of stainless steel pipe. If the hardness is too low, orange peel is easy to appear on the surface during deep drawing, which affects BQ performance. BQ with high hardness is relatively good.After that, the second widely used steel is mainly used in food industry, pharmaceutical industry and surgical equipment. Adding molybdenum makes it obtain a special corrosion-resistant structure. Because it has better chloride corrosion resistance than stainless steel pipe, it is also used as & ldquo; marine steel & rdquo;. SS is usually used in nuclear fuel recovery devices. Grade stainless steel Steel pipes usually also meet this application level.


    TrinidadStainless steel beltBusiness situation



    Stainless steel pipe, which was consumed and used at the end of the s, and relevant parties are starting from reducing wall thickness and money, so as to facilitate further implementation. In order to promote stainless steel pipe, since the s, China has started to reduce wall thickness and cost; High diameter to wall ratio and high precision & rdquo; The technical effect of stainless steel pipe makes the stainless steel pipe lose its application and expand quickly. There are various connection modes of stainless steel pipes. The rare types of pipe fittings include contraction type, compression type, push thread type, socket welding type, union flange connection, welding type and derivative series connection mode combining welding with traditional connection. These connection methods have different application ranges according to their principles, but most of them are convenient, firm and reliable. The sealing ring or gasket materials used for connection are mostly silicone rubber, nitrile rubber and EPDM that meet the requirements of national specifications, which eliminates the worries of users. In the construction of water supply pipe system, due to the glorious history of galvanized steel pipe, all kinds of new plastic pipes and composite pipes have been lost and developed rapidly, but they are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. In direct drinking water, stainless steel pipe system is undoubtedly one of the best. At present, hotels and public places at the international level have been equipped or are equipped with direct drinking water pipelines. In many cases, stainless steel pipe has more advantages, especially the stainless steel pipe with wall thickness of only . ~ mm has the characteristics of safety, reliability, sanitation, environmental protection, economy and applicability in high-quality drinking water system, hot water system and water supply system that puts safety and sanitation first. It has been proved by engineering theories at home and abroad that it is not only one of the new, energy-saving and environmental protection pipes with good comprehensive function of water supply, but also a very competitive water supply pipe, which will play an unparalleled role in improving water quality and improving people's living standard.assets,The bearing capacity of decorative stainless steel pipe ice load is the main control load of offshore platform in severe cold area, a total of concrete-filled steel tubular shear members were fabricated to study the effects of outer steel pipe material, concrete strength, void ratio and shear span ratio on the shear capacity of concrete-filled steel tubular in pipe. It is found that the shear strength of members increases with the decrease of void ratio and the increase of concrete strength; The larger the shear span ratio, the smaller the shear strength. Combined with the test, the empirical formula of shear capacity of concrete-filled steel tubular in pipe is proposed, which is analyzed and verified by ABAQUS finite element modeling software. The results show that the simulation is in good agreement with the test results. In order to study the axial compression performance of stainless steel tube concrete conduit leg and the axial compression performance of stainless steel concrete conduit leg, experiments are used to verify the correctness of the finite element model. The load displacement curves of specimens in groups were compared, and the effects of different void ratio, concrete strength, diameter thickness ratio and bone index on the axial compression performance of concrete-filled stainless steel tubular short columns under axial compression were analyzed. The results show that with the increase of concrete strength, the bearing capacity of specimens increases, but the ductility of specimens decreases; With the increase of void ratio and diameter thickness ratio, which solves the problem of limited length of finished products in traditional forging or casting process, and meets the special requirements of complex working environment on pipeline performance. The three roll cross rolling forming process of double-layer casing with outer layer -n austenitic heat-resistant stainless steel and inner layer cr-ni martensitic heat-resistant stainless steel was simulated and optimized by using DEFORM-D finite element simulation software. The internal and external deformation, stress-strain field and temperature field of double-layer stainless steel pipe were analyzed, and the optimal deformation parameter combination was obtained by orthogonal test. The simulation results show that in the process of three roll cross rolling, the large values of equivalent stress, equivalent strain and temperature are concentrated in the area between the outer tube and the roll, and the overall performance parameters of the outer tube are greater than those of the inner tube. The range analysis and variance analysis of orthogonal design test show that the optimal deformation parameter is rough rolling temperature deg; C. Feed angle & deg;, Roll speed: rmin. Objective to improve the existing connection mode of the braking system pipe system of railway freight cars, and accurately shape the end of the stainless steel pipe, so as to obtain the forged joint with better mechanical properties. According to the connection mode of the original pipe system and the plastic forming characteristics of steel pipe, a multi-step upsetting and extrusion process for the end of stainless steel pipe is proposed. The process is numerically simulated by DEFORM-D three-dimensional finite element simulation software, and the forging forming process is analyzedLong term professional L stainless steel pipe, s stainless steel pipe and L stainless steel pipe. Therefore the specification of a group of slightly larger formed pipes used in the production of pipe dies is about -.Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently, the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, energy spectrometer, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil,Trinidad201 stainless steel strip, stainless steel belt, stainless steel pipe,TrinidadStainless steel braided belt, high price, service, on-site settlement, honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation, and discusses the corrosion resistance mechanism of different films on its surface silicon treatment and the combination of citric acid passivation and acid silicon system treatment, which can provide reference for the new direction of stainless steel surface treatment, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film, but also benefits from its double-layer film structure.Trinidad,The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, which has strict requirements on the chemical composition and temperature of molten steel; In order to prevent secondary oxidation of molten steel, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, tundish, nozzle and submerged nozzle.. Raw material problem of stainless steel pipe. If the hardness is too low, it is not easy to polish (BQ is not good). If the hardness is too low, orange peel is easy to appear on the surface during deep drawing, which affects BQ performance. BQ with high hardness is relatively good.That is stainless steel. The GB brand is CrNi. & mdash; it has better temperature resistance than it.

    11An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  7. Sagua-la-GrandeCommon stainless steelWhich brand is good

    The recrystallization temperature changes with the shape variable. When the shape variable is %, the recrystallization temperature drops to ℃ and the recrystallization annealing temperature of cold deformed austenitic stainless steel is ~ ℃. At ℃, it needs to be kept warm for h, fully burned at ℃, and then water-cooled.Assembly: the sealing ring shall be correctly installed in the U-groove of the pipe fitting, put the pipe into the socket of the pipe fitting and wait for crimping.Sagua-la-Grande,(II) The price of steel has been running at a low level. From June to June , the overall performance of the domestic steel market was depressed. With the substantial release of crude steel production capacity, the market supply and demand fell into an imbalance, and the steel price entered the downward channel, which has been weak for more than four months. As of June , , lower than the first points. The prices of eight steel varieties mainly counted by the iron and steel industry association were higher than at the beginning of the year different degrees At low temperature, ferritic stainless steel pipe has low-temperature brittleness like carbon steel, but austenitic steel does not. Therefore, ferritic or martensitic stainless steel produces low-temperature brittleness, while austenitic stainless steel or nickel base alloy does not show low-temperature brittleness. Sus (Cr) and SUS (cr) of ferritic stainless steel pipe It shows that the impact value decreases sharply at low temperature. Therefore, it is necessary to pay special attention when using at low temperature. As a way to improve the impact toughness of ferritic series stainless steel, high purification process can be considered. With the help of C and N level, the embrittlement temperature is in the range of - ℃ to - ℃Querecotillo,In the building water supply pipe system, due to the end of the glorious history of galvanized steel pipe, but various pipes still have some deficiencies in varying degrees, which are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. Therefore, relevant experts: building water supply pipes will eventually return to the era of metal pipes. According to foreign application experience, stainless steel pipe is recognized as one of the pipes with good comprehensive performance in metal pipe.There shall be a special storage rack. The storage rack shall be a wooden or painted carbon steel support or padded with rubber pad to isolate it from carbon steel and other metal materials. During storage the storage position shall be convenient for lifting and absolutely isolated from other data storage areas. Protective measures shall be taken to avoid purification, collision with other components, purification and damage of iron metal.Flux coated welding wire is used for backing welding and argon gas is not used inside the weld. The welder's operation is simple and fast


    Sagua-la-GrandeCommon stainless steelWhich brand is good



    The manufacturing and maintenance of equipment consume more than tons of stainless steel pipe. This kind of industry mainly adopts sanitary or grade stainless steel pipe. The sanitary seamless pipe made of imported sus and l can meet the special requirements of various media in the field of food and biopharmaceutical. Stainless steel has the advantages and good performance of stainless steel. It is widely used in kitchen equipment, utensils and medical instruments in the food industry The demand for tableware, towel hanging bracket and bracket of refrigerator in daily life is increasing.When transporting domestic and drinking water, the pipeline shall not pass through the toxic pollution area. If necessary, protective measures shall be taken.After that, the second widely used steel is mainly used in food industry, pharmaceutical industry and surgical equipment. Adding molybdenum makes it obtain a special corrosion-resistant structure. Because it has better chloride corrosion resistance than stainless steel pipe, it is also used as & ldquo; marine steel & rdquo;. SS is usually used in nuclear fuel recovery devices. Grade stainless steel Steel pipes usually also meet this application level.offer,The recrystallization temperature changes with the shape variable. When the shape variable is %, the recrystallization temperature drops to ℃, and the recrystallization annealing temperature of cold deformed austenitic stainless steel is ~ ℃. At ℃, it needs to be kept warm for h, fully burned at ℃, and then water-cooled.Because stainless steel has many ideal properties required by building materials, it can be said to be unique in metals, and its development continues. In order to make stainless steel more neutral in traditional applications, existing types have been improved, and new stainless steel is being developed to meet the strict requirements of advanced architectural applications. Due to the continuous improvement of production efficiency and quality, stainless steel has become one of the cost-effective materials selected by architects. Stainless steel integrates performance, appearance and use characteristics, so stainless steel will still be one of the best building materials in the world.Application: utility boiler industry, mainly in key parts such as high temperature section of superheater and reheater.


    Sagua-la-GrandeCommon stainless steelWhich brand is good



    Application fields: chemical industry, construction industry.install,Using CrO and hsoho as the main components and adding an appropriate amount of mnso.ho coloring solution, the chemical coloring of stainless steel industrial pipe was carried out. The effects of pretreatment process, coloring solution temperature, mass concentration and coloring time on the color film of stainless steel industrial pipe were discussed. Through a large number of experiments, a good formula and process range of coloring solution are obtained. With the increase of temperature and time, the film thickness increases, and the color changes are brown, blue,Sagua-la-GrandeStainless steel 304 pipe, gold, purplish red and green. After curing and sealing treatment, the colored film of stainless steel industrial pipe has more uniform surface color, good reproducibility, and significantly improved wear resistance and corrosion resistance.While China's exported steel pipes are frequently subject to foreign anti-dumping and countervailing investigations,Sagua-la-Grande904L plate stainless steel, imported steel pipes are also constantly impacting domestic steel enterprises.Hardness test: annealed stainless steel pipes with inner diameter of more than mm and wall thickness of less than mm can be tested by w-b Vickers hardness tester, which is very fast and simple, and is suitable for rapid and nondestructive qualification test of stainless steel pipes. For stainless steel pipes with inner diameter of more than mm and wall thickness of more than mm, the surface Rockwell hardness tester shall be used to test HRT or hrn hardness. For stainless steel pipes with inner diameter less than mm and greater than mm, the special Rockwell hardness tester for pipes shall be used to test hrt hardness. When the inner diameter of stainless steel pipes is greater than mm, the Rockwell or surface Rockwell hardness tester can also be used to test the hardness of pipes.Sagua-la-Grande,Decorative stainless steel pipe: usually the outer wall is relatively bright, so its name is considered. Decorative stainless steel pipe is used for decorative purposes. The stainless steel pipe for general decorative purposes is relatively thin. Because it is different from the manufacturing process of stainless steel product pipe the price also varies greatly. The general production process of decorative stainless steel pipe is ordinary welded stainless steel pipe. Guangdong stainless steel product pipe stainless steel product pipe: generally, the surface of stainless steel product pipe is also a bright surface and a small number of pipes with acid pickling industrial surface. As mentioned above, stainless steel product pipe belongs to the purpose of stainless steel products, because the outer diameter size, mechanical properties, acid,Sagua-la-Grande2520 stainless steel pipe fittings, alkali and corrosion resistance of stainless steel pipe are relatively good, Therefore, stainless steel pipes are generally used as anti-corrosion materials or hardware products in large-scale production enterprises. The production process of stainless steel pipes is one-time forming, and nitrogen protection is also added during welding.The American Iron and Steel Institute uses three digits to identify various standard grades of malleable stainless steel. Among them, austenitic stainless steel is marked with numbers of and series. For example, some ordinary austenitic stainless steel is marked with and.When hoisting stainless steel pipes, public slings, such as hoisting belt and public collet number, shall be used. It is strictly prohibited to use steel wire rope to avoid scratching the surface; and when hoisting and placing, it shall prevent scratching caused by impact and collision. If there are surface scratches, electric arc traces and surface purification in the process of transportation, it must be completely cleaned, polished with an angle grinder, and then polished Polishing with optical sheet or metallographic sandpaper.

    13An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  8. Florida30 stainless steelProduct selection and use cheats

    Stainless steel pipe, which was consumed and used at the end of the s, is a rebirth group emerging in today's pipe range. It has been widely used in the construction of water supply and direct drinking water pipelines. Stainless steel pipe is durable and has been recognized by the engineering community, and relevant parties are starting from reducing wall thickness and money, so as to facilitate further implementation. In order to promote stainless steel pipe, since the s,Florida616 stainless steel plate, China has started to reduce wall thickness and cost; High diameter to wall ratio and high precision & rdquo; The technical effect of stainless steel pipe makes the stainless steel pipe lose its application and expand quickly. There are various connection modes of stainless steel pipes. The rare types of pipe fittings include contraction type, compression type, union type, push type, push thread type, socket welding type, union flange connection, welding type and derivative series connection mode combining welding with traditional connection. These connection methods have different application ranges according to their principles, but most of them are convenient, firm and reliable. The sealing ring or gasket materials used for connection are mostly silicone rubber, nitrile rubber and EPDM that meet the requirements of national specifications, all kinds of new plastic pipes and composite pipes have been lost and developed rapidly, stainless steel pipe system is undoubtedly one of the best. At present, stainless steel pipe has more advantages, especially the stainless steel pipe with wall thickness of only . ~ mm has the characteristics of safety, reliability, sanitation, environmental protection, economy and applicability in high-quality drinking water system, hot water system and water supply system that puts safety and sanitation first. It has been proved by engineering theories at home and abroad that it is not only one of the new, energy-saving and environmental protection pipes with good comprehensive function of water supply, but also a very competitive water supply pipe, which will play an unparalleled role in improving water quality and improving people's living standard.The back is blocked with blocking plate for ventilation protection; Only soluble paper or the combination of soluble paper and blocking plate is used for blocking ventilation protection; Use flux cored wire for backing TIG welding.Florida,Cold rolled oriented silicon steel strip (sheet) represents: times of DQ + iron loss value (at the frequency of Hz, the waveform is sinusoidal, and the magnetic induction peak value is the unit weight iron loss value of T) + times of thickness value. Sometimes, G is added after the iron loss value to represent high magnetic induction. For example, dq represents cold rolled oriented silicon steel strip (sheet) with iron loss value of and thickness of .mm. Now the new model is q.Stainless steel pipe is durable and has been recognized by the engineering community, and relevant parties are starting from reducing the wall thickness and lowering the grid, so as to facilitate further development. In particular,FloridaWide cold rolled stainless steel strip, the price of stainless steel pipe is not high, so the supporting connection, the reliability and price of pipe fittings are the main factors determining its development. Domestic developers have independently developed connection technology and pipe fittings in Sichuan, Guangdong, Zhejiang, Jiangsu and other places, which is a promising pipe. The Ministry of construction and relevant departments also attach great importance to this new type of pipe. According to China technology market management promotion center and gksz [] No. document on Application & ldquo; High diameter to wall ratio and high precision stainless steel medium and high pressure water supply pipes and supporting fittings and special technology & rdquo; It is learned from the notice that the application of stainless steel pipe technology and product is of great significance to improve the grade of modern buildings in China and improve and ensure the water quality of water supply.Buftea,Austenitic stainless steel. It contains more than % chromium, about % nickel and a small amount of molybdenum, titanium, nitrogen and other elements. Good comprehensive performance and resistance to corrosion of various media.When installing and welding the fixed port of stainless steel pipe, it is difficult to vent on the inner side, and some sides are easy to be blocked. In this case, water-soluble paper + blocking plate can be used for blocking. That is, the easy to vent and good side can be blocked with blocking plate, the difficult to vent and bad blocking plate side can be blocked with water-soluble paper, environmentally friendly hygienic reliable, economical and applicable. The successful development of pipeline and new reliable, simple and convenient connection makes it have more irreplaceable advantages of other pipes. It will be used more and more in engineering, and the use will be more and more popular. It has a good prospect.


    Florida30 stainless steelProduct selection and use cheats



    Model & mdash; Cheap model (British and American), usually used as automobile exhaust pipe, is ferritic stainless steel (chromium steel).  SPHCSPHC—& mdash; In the first place, P is the abbreviation of plate h is the abbreviation of hot heat, and C is the abbreviation of commercial. It generally represents hot-rolled steel plate and strip.Ferritic stainless steel the Cr content of ferritic stainless steel is generally % ~ %, and the carbon content is less than .%. Other alloying elements are sometimes added. The metallographic structure is mainly ferrite, and there is no & alpha during heating and cooling=& amp; amp; gt;& gamma; The transformation cannot be strengthened by heat treatment. Strong oxidation resistance. At the same time, it also has good hot workability and certain cold workability. Ferritic stainless steel is mainly used to make components with high corrosion resistance and low strength requirements. It is widely used in manufacturing equipment such as production, nitrogen fertilizer and chemical pipelines.details,Restate the quality of stainless steel pipe, such as stainless steel pipe, we promise & ldquo; chromium and nickel & rdquo; Penalty for false and provide quality inspection report and certificate of conformity.Deformation strengthening of austenitic stainless steel stainless steel has good cold deformation performance. It can be cold drawn into very thin steel wire and cold rolled into very thin steel strip or steel pipe. After a large amount of deformation, the strength of the steel is greatly improved, especially when rolling in the subzero temperature zone. The tensile strength can reach more than MPa. This is because in addition to the cold hardening effect, there are also superimposed Deformation induced M transition.In the building water supply pipe system, due to the end of the glorious history of galvanized steel pipe, various new plastic pipes and composite pipes have developed rapidly, but various pipes still have some deficiencies in varying degrees, which are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. Therefore,Florida310S stainless steel, relevant experts: building water supply pipes will eventually return to the era of metal pipes. According to foreign application experience, stainless steel pipe is recognized as one of the pipes with good comprehensive performance in metal pipe.


    Florida30 stainless steelProduct selection and use cheats



    Stainless steel has two classifications: one is divided into chromium stainless steel and chromium nickel stainless steel according to the characteristics of alloy elements; The other is divided into m stainless steel, f stainless steel, a stainless steel and A-F duplex stainless steel according to the microstructure of steel in normalized state.Discount,Some reasons for product composition ratio: in order to reduce the production cost, reduce the proportion content of some important elements such as chromium and nickel, and increase the content of other elements such as carbon. This production phenomenon that the composition ratio is not strictly in accordance with the product model and product characteristics not only greatly reduces the product quality for example, when the chromium content of stainless steel pipe is insufficient, it not only affects the production The corrosion resistance and formability of products have potential product quality and safety hazards when they are used in chemical, equipment and production industries. At the same time, they also affect the appearance and oxidation resistance of products.The packaging itself requires manufacturing costs, and the cost of packaging requires labor costs, the sum of which exceeds the weight of a single bag.And stainless steel are molybdenum containing stainless steels. The molybdenum content of stainless steel is slightly higher than that of stainless steel. Due to the molybdenum content in stainless steel, the overall performance of this steel is better than that of and stainless steel. Under high temperature conditions, when the concentration is lower than % and higher than %, stainless steel has a wide range of applications. Stainless steel also has good chloride corrosion resistance, so it is usually used in marine environment.Florida,At the same time the Ministry of construction attaches great importance to the application of stainless steel pipes. The industry standard of stainless steel water pipe was issued and implemented in . The Ministry of construction has issued documents on relevant technical specifications and installation sets of pipeline engineering, which are being prepared by Tongji University. All kinds of stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe are qualified. Welcome to telephone inquiry and sincerely invite cooperation! At present, there are stainless steel pipes in Sichuan, Guangdong, Zhejiang, Jiangsu and other places, and the products have become mature. Therefore, the time for application has come.The recrystallization temperature changes with the shape variable. When the shape variable is %, the recrystallization temperature drops to ℃, and the recrystallization annealing temperature of cold deformed austenitic stainless steel is ~ ℃. At ℃, it needs to be kept warm for h fully burned at ℃, and then water-cooled.Various welding methods of combined welding stainless steel welded pipe have their own advantages and disadvantages. Combined welding methods include argon arc welding plus plasma welding, high-frequency welding plus plasma welding

    14An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  9. Colon410 magnetic stainless steelHow to take measures for large-scale enterprises

    Model & mdash& ldquo; Cutting tool level & rdquo; Martensitic steel, an early stainless steel similar to Brinell high chromium steel. It is also used for surgical tools, which can be made very bright. Model & mdash; Ferritic stainless steel for decoration, such as automotive accessories. Good formability, but poor temperature resistance and corrosion resistance.When improved, it is possible to use it in refrigeration related engineering. Recently, suslx (cr Ti, Nb LC) and susl have been applied to frozen shells. Ferritic stainless steel has body centered cubic structure. When the material properties become weaker, sharp cracks will expand rapidly and cause brittleness. Austenitic series stainless steel will not produce brittleness because it has face centered cubic structure. Austrian stainless steel SUSL (cr-ni LC) and SUSL (cr-ni-mo-lc) shows that it still has superior impact characteristics at low temperature. However, pay attention to the precipitation of ferrite or martensite due to processing, and the tendency of embrittlement due to sensitized carbide or & sigma; equal heterogeneous precipitation.Colon,China's numbering rules adopt the use of element symbols and Chinese pinyin. Open hearth steel: P, boiling steel: killed steel: class a steel: T: Special: ball bonded steel and spring steel such as CrMnTi simn, (C content is expressed in tens of thousands)Stress corrosion cracking (SCC) refers to the cracking caused by the combined action of stress corrosion stress (mainly tensile stress) and corrosion of austenitic stainless steel Austenitic stainless steel is prone to stress corrosion in corrosive media containing chloride ions. When the Ni content reaches % - %, it is a long-term enterprise engaged in stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe. Welcome to consult. The stress corrosion tendency of austenitic stainless steel is very large. Continue to increase the Ni content to ~ %, and the stress corrosion tendency gradually decreases until it disappears.KrasnovodskStainless steel has two classifications: one is divided into chromium stainless steel and chromium nickel stainless steel according to the characteristics of alloy elements; The other is divided into m stainless steel, f stainless steel, a stainless steel and A-F duplex stainless steel according to the microstructure of steel in normalized state.Stainless steel pipe is a kind of hollow long round steel, which is widely used in industrial transmission pipelines such as petroleum, chemical industry, medical treatment, food, mechanical instruments and mechanical structural parts. In addition, when the bending and torsional strength are the same, the weight is relatively light. It provides L stainless steel pipe s stainless steel pipe and L stainless steel pipe for a long time. It is an old brand of , with advantages in price and guaranteed quality It is also widely used in manufacturing mechanical parts and engineering structures. It is also commonly used as furniture, kitchenware, etc.The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, which has strict requirements on the chemical composition and temperature of molten steel; In order to prevent secondary oxidation of molten steel, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, tundish, nozzle and submerged nozzle.


    Colon410 magnetic stainless steelHow to take measures for large-scale enterprises



    Crimping: during crimping, the convex part of the pipe fitting is placed in the concave groove of the die, and the jaw is perpendicular to the pipe axis.China's numbering rules adopt the use of element symbols and Chinese pinyin. Open hearth steel: P boiling steel: killed steel: class a steel: T: Special: ball bonded steel and spring steel, such as CrMnTi simn, (C content is expressed in tens of thousands)Chloride ions exist in the service environment. Chloride ions exist widely, such as salt, sweat, sea water, sea breeze, soil, even more than ordinary low carbon steel. Therefore, there are requirements for the service environment of stainless steel, and it is necessary to remove dust frequently and keep it clean and dry. (in this way, we can give him a & ldquo; improper use & rdquo;) there is an example in the United States: an enterprise uses an oak container to contain a solution containing chloride ions. The container has been used for nearly years. The ninetieth generation of the last century plans to replace it. Because the oak material is not modern enough, the container leaks due to corrosion days after it is replaced with stainless steel.Quality documents,Model & mdash; The addition of sulfur improves the processability of the material.Hardness test: annealed stainless steel pipes with inner diameter of more than mm and wall thickness of less than mm can be tested by w-b Vickers hardness tester, which is very fast and simple, the surface Rockwell hardness tester shall be used to test HRT or hrn hardness. For stainless steel pipes with inner diameter less than mm and greater than mm, the Rockwell or surface Rockwell hardness tester can also be used to test the hardness of pipes.The protection mechanism of stainless steel backing wire + TIG process is that the back weld is protected by the metallurgical reaction of slag produced by welding wire melting and its alloy elements, and the front weld is protected by argon, slag and alloy elements.


    Colon410 magnetic stainless steelHow to take measures for large-scale enterprises



    Application field: tubular boiler for pipeline in harsh seabed environment product description: ultra (ultra) critical unit is the basis of modernization of power generation equipment and energy conservation and emission reduction. Among the important pressure parts of ultra (supercritical) boiler, superheater and reheater are the parts with high working temperature and bad working environment. Previously, all such materials used in China were imported from abroad, while only steel material manufacturers in the world have limited capacity. Such materials have a large gap, expensive import prices, difficult procurement and short supply, China's demand for utility boiler tubes is about tons, and with the continuous improvement of ultra (supercritical) power generation technology, the demand is expanding. Several large domestic enterprises have invested a lot of human and financial resources in the R & D and production of such products, and have made considerable achievements. On the one hand,ColonStainless steel explosion-proof flexible pipe, but also brought considerable economic benefits to enterprises.Executive standard,Section shape stainless steel pipe can be divided into round pipe and special-shaped pipe according to the section shape. Special shaped tubes include rectangular tubes, rhombic tubes, elliptical tubes, hexagonal tubes, octagonal tubes and various cross-section asymmetric tubes. Special shaped pipe is widely used in various structural parts, tools and mechanical parts. Compared with circular pipe, special-shaped pipe generally has large moment of inertia and section modulus, and has large bending and torsion resistance, which can greatly reduce the structural weight and save steel.The existence of medium temperature brittle zone requires strict heat treatment and welding process system to avoid the appearance of harmful phase and damage the performance.First of all, let's understand what stainless steel is. Generally speaking, steel that will not rust is called stainless steel, but in an academic sense, steel resistant to weak corrosive media such as air, steam and water and chemical corrosive media such as acid, alkali and salt. Also known as stainless acid resistant steel. In practical application, the steel resistant to weak corrosion medium is often called stainless steel, while the steel resistant to chemical medium is called acid resistant steel. Due to the difference in chemical composition between the two, the former is not necessarily resistant to chemical medium corrosion, while the latter is generally stainless. The corrosion resistance of stainless steel depends on the alloying elements contained in the steel. Chromium is the basic element for stainless steel to obtain corrosion resistance. When the chromium content in the steel reaches about % chromium reacts with oxygen in the corrosive medium to form a thin oxide film (self passivation film) on the steel surface, which can prevent further corrosion of the steel matrix. In addition to chromium, the commonly used alloy elements include nickel,ColonStainless steel pipe, molybdenum, titanium, niobium, copper, nitrogen, etc.,Colon630 stainless steel strip, so as to meet the requirements of various uses on the microstructure and properties of stainless steel.Colon,The petrochemical industry, including the chemical fertilizer industry, has a great demand for stainless steel pipes. Stainless steel pipes are mainly used in this industry, including, , l, etc., with an outer diameter of about ¢ - ¢ and a wall thickness of about mm-mm (generally medium and low pressure transmission pipes with a specification of more than & phi; mm). The specific application fields are: furnace pipes, material transmission pipes, heat exchanger pipes, etc.Stainless steel pipe is a kind of economical section steel and an important product in the iron and steel industry. It can be widely used in life decoration and industry. Many people on the market are used to make stair handrails window guards, railings, furniture, etc. and materials are common.Welding of stainless steel pipe argon arc welding stainless steel pipe: it is required to have deep penetration, no oxide inclusion, and the heat affected zone can be as small as possible. Argon arc welding maintained by tungsten inert gas has good compliance, high welding quality and good penetration function. Its commodities are widely used in chemical, nuclear and food industries.

    15An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  10. CienfuegosStainless steel column pipeWhat's and what's the use

    Stainless steel is usually divided into stainless steel pipe, stainless steel pipe and ferritic stainless steel according to the matrix structure. Chromium content % ~ %. Its corrosion resistance, toughness and weldability increase with the increase of chromium content, and its chloride stress corrosion resistance is better than other kinds of stainless steel.Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently, citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method, the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel belt, stainless steel pipe, high price, service, on-site settlement, honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore, silicon treatment and the combination of citric acid passivation and acid silicon system treatment, and discusses the corrosion resistance mechanism of different films on its surface, which can provide reference for the new direction of stainless steel surface treatment, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film, but also benefits from its double-layer film structure.Cienfuegos,. Raw material problem of stainless steel pipe. If the hardness is too low, it is not easy to polish (BQ is not good). If the hardness is too low, orange peel is easy to appear on the surface during deep drawing, which affects BQ performance. BQ with high hardness is relatively good.Human factors are also one of the causes of product oxidation that some consumers often encounter when using stainless steel products. Some consumers operate improperly in product use and maintenance,CienfuegosPickling of stainless steel pipe, especially some stainless steel pipe products used in food and chemical equipment industry. For the artificially generated oxidation of steel products, they should have correct product use knowledge and Reasonable and effective maintenance shall be carried out regularly to reduce oxidation caused by improper use.Prawet,There are various connection modes of stainless steel pipes. The common types of pipe fittings are compression type, compression type, union type, push type, push thread type, socket welding type, welding type and derivative series connection mode combining welding with traditional connection. These connection modes have different application ranges according to their principles, but most of them are easy to install, nitrile rubber and EPDM that meet the requirements of national standards. L stainless steel pipe, s stainless steel pipe, L stainless steel pipe and other brand products are provided for a long time. The designated products are complete and the quality is guaranteed, which eliminates the need for useFor example, the price of tons of goods = tons = the result example: the price excluding tax of ton of goods = a ton = ~ the total weight of the known coil weight and price = the coil weight price the thickness of stainless steel plate & Chi; Width & Chi; Long & Chi; e.g. & Chi; Χ Χ = kg stainless steel plate weight per square meter (kg) calculation formula: specific gravity thickness (mm) width (mm) length (m) stainless steel weight per meter (kg) stainless steel pipe calculation formula: diameter (mm) diameter (mm) (correct calculation of the price difference between burr and trimming of nickel stainless steel . chromium stainless steel) in the market, the price difference between burr and trimming of stainless steel is usually set at a fixed price. For example, this method is not scientific. In fact, the price difference between burr and trimming of stainless steel is different The correct calculation should be like this. the responsibility of the calender is that the annealed steel strip is blackened, the furnace liner is perforated, and ammonia leakage will cause rust. . The responsibility of the steel plant is that the peeling and trachoma of the steel strip will cause rust. Substandard materials will cause rust. the responsibility of the calender is that the annealed steel strip is blackened, the furnace liner is perforated, and ammonia leakage will cause rust. . The responsibility of the pipe manufacturer: the welds in the pipe manufacturer are polished rough, which will cause rust.


    CienfuegosStainless steel column pipeWhat



    The specific steps of continuous casting billet process of stainless steel pipe fittings are as follows: according to different steel grades, the vibration process of mold is matched with protective slag, which can improve the yield of %, save energy and shorten the production cycle, so as to improve the yield of molten steel.According to the steel structure,CienfuegosStainless steel water pipe, austenite ferrite ferrite martensite and precipitation hardening note: precipitation hardening (precipitation strengthening): refers to a heat treatment process in which the metal is hardened by the segregation zone of solute atoms in supersaturated solid solution and / or the desolved particles are dispersed in the matrix. For example, austenitic precipitated stainless steel can obtain high strength by precipitation hardening at ~ ℃ or ~ ℃ after solution treatment or cold working. That is, the supersaturated solid solution of some alloys is placed at room temperature or heated to more & amp; gt;& amp; gt;Ferritic stainless steel the Cr content of ferritic stainless steel is generally % ~ %, and the carbon content is less than .%. Other alloying elements are sometimes added. The metallographic structure is mainly ferrite, and there is no & alpha during heating and cooling=& amp; amp; gt;& gamma; The transformation cannot be strengthened by heat treatment. Strong oxidation resistance. At the same time, it also has good hot workability and certain cold workability. Ferritic stainless steel is mainly used to make components with high corrosion resistance and low strength requirements. It is widely used in manufacturing equipment such as production, nitrogen fertilizer and chemical pipelines.Where is good,When the stainless steel fixed port is welded, it will be difficult to ventilate on both sides of the weld. At this time, how to ensure the argon filling protection on the inner side of the weld has become a difficult problem. For a long time, facing the national high price, the reasonable price and perfect service of all kinds of stainless steel plates, stainless steel coils, stainless steel belts and stainless steel pipes have been recognized by the majority of customers. In the actual construction on site, we use two welding joints The above problems were successfully solved by plugging with water-soluble paper on the side, ventilation from the weld center and sealing with adhesive tape on the outside (see Table ).Section shape stainless steel pipe can be divided into round pipe and special-shaped pipe according to the section shape. Special shaped tubes include rectangular tubes, rhombic tubes, elliptical tubes, hexagonal tubes, octagonal tubes and various cross-section asymmetric tubes. Special shaped pipe is widely used in various structural parts, tools and mechanical parts. Compared with circular pipe, special-shaped pipe generally has large moment of inertia and section modulus, and has large bending and torsion resistance, which can greatly reduce the structural weight and save steel.Restate the quality of stainless steel pipe, such as stainless steel pipe, we promise & ldquo; chromium and nickel & rdquo; Penalty for false and provide quality inspection report and certificate of conformity.


    CienfuegosStainless steel column pipeWhat



    Series & mdash; Martensitic precipitation hardening stainless steel.Market trend,When using this method, it should be noted that the water-soluble paper should be double-layer and must be pasted well, otherwise it is easy to cause damage and fall off of the water-soluble paper, resulting in loss of argon protection of the inner weld and oxidation, resulting in cutting of the weld junction and re welding which can not ensure the welding quality and seriously affect the construction period. Therefore, the water-soluble paper should be strictly checked and pasted before welding. series & mdash; Chromium nickel manganese austenitic stainless steel.The accumulation of organic impurities caused by decomposition products and the pollution of some other metal impurities. There is no turnover of long-term stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe to avoid price difference. The price is % higher than the market price! The price of more than one ton is higher! So that the nickel bath can not get the ideal bright nickel coating it is necessary to carry out large-scale treatment. In the solution of bright nickel plating on stainless steel pipe, the brightener has developed rapidly and has many varieties. To sum up, the development of brighteners has experienced four generations. Instead of the original product, saccharin and butynediol can be plated with bright nickel with high flatness. Its application flourished in the s and s. It seems that due to the instability of butynediol in the nickel plating bath, short service life and rapid accumulation of organic impurities, the nickel bath needs to be treated frequently. Therefore, epoxy chloropropyl or epoxy is branched with butynediol to synthesize the second-generation nickel plating brightener, such as b brightener. The situation has improved. Be and retain alkynyl. Later, pyridinyl is polymerized to form the third-generation product Faster light output, which has developed to the fourth generation of products. It has less use less amount of brightener and longer service life. Now it further uses various combinations of nickel plating brightener intermediates to form a new brightener, faster light output speed and longer treatment cycle. According to the connection and rolling process, hot-rolled and cold drawn (rolled) stainless steel pipes. According to the difference of metallographic structure of stainless steel, it mainly includes semi Ferritic and semi martensitic stainless steel pipe, martensitic stainless steel pipe, austenitic stainless steel pipe, austenitic ferritic stainless steel pipe etc.Cienfuegos,High frequency welding high frequency welding: with relatively high power supply it can reach a higher welding speed for steel pipes with different materials,Cienfuegos30408 stainless steel pipe, outer diameter and wall thickness. Compared with argon arc welding, it is more than ten times its high welding speed. Therefore, stainless steel pipes for common use have a higher consumption rate. Due to the high speed of high frequency welding, it is difficult to remove burrs in welded pipes. At present, which is also one of the reasons.This material without titanium and niobium has an inherent tendency of intergranular corrosion. Intergranular corrosion can be reduced by adding titanium and niobium and stabilizing treatment. It is a kind of high alloy steel that can corrode in air or chemical corrosive medium. Stainless steel has beautiful surface and good corrosion resistance. It does not have to undergo surface treatment such as color plating to play a role of rust freeTherefore, the field with high utilization rate of stainless steel with high competitiveness and comprehensive quality will also be an important part of the plan.

    16An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  11. MoronStainless steel braided mesh beltImprove indicators, reduce costs and increase production

    Series & mdash; Heat resistant chromium alloy steel.In engineering, the following methods are often used to prevent intergranular corrosion: reduce the amount of carbon in steel so that the amount of carbon in steel is lower than the saturated solubility of austenite in equilibrium, that is, fundamentally solve the problem of precipitation of chromium carbide (crc) on the grain boundary. Generally, the requirement of intergranular corrosion resistance can be met when the amount of carbon in steel is reduced to less than .%.Moron,Spcespce & mdash; & mdash; refers to cold-rolled carbon steel sheet and strip for deep drawing, equivalent to China Al () deep drawing steel. If it is necessary to ensure non aging property, add n at the end of the brand as spcen. Quenching and tempering code of cold-rolled carbon steel sheet and strip: annealing status is a, standard quenching and tempering is s, / hard is / , hard is / , hard is . Surface processing code: dull finish rolling is D, bright finish rolling is B. spcc-sd represents cold-rolled carbon sheet generally used for standard quenching and tempering and matt finish rolling. Another example is spcct-sb It refers to cold-rolled carbon sheet with standard quenching and tempering and bright processing and required to ensure mechanical properties.In the interior decoration project, the proportion of water pipes is very small,MoronStainless steel triangle pipe, whether it is data consumption or price. However, once the water pipes show achievements, the results will be very serious. Therefore it is extremely important to choose water pipes with reliable quality, high volatility, convenient maintenance, health and environmental protection. With the development of the national economy and the progress of people's living standards, people's requirements for domestic water pay more and more attention to health and environmental protection. A good water source escort pipeline has become a careful choice. Water pipes are generally experienced in lead pipes & rarr; Copper pipe & rarr; Iron pipe & rarr; Galvanized iron pipe → Plastic pipe & rarr; Development process of stainless steel pipe. It has become a trend in the world to select high-quality stainless steel materials as water supply pipes. The material indicates that in Germany, more than % of residents choose stainless steel water pipes; In Japan, more than % of households in Tokyo have adopted stainless steel water pipes; In Australia, it has begun to change other pipes to stainless steel pipes; In the United States, the water pipes of five-star hotels in Las Vegas are all made of stainless steel. Since the beginning of the st century, due to the progress of living standards, more than % of residents in China need water pipes to meet their needs of high-quality life. Therefore, high-quality stainless steel materials move from tableware to household water pipes. It has become a trend to select high-quality stainless steel pipes in tooling or home decoration projects. Stainless steel water pipes and stainless steel pipe fittings will become an indispensable part of the building materials market in the future. Stainless steel material is a recognized health material that can be implanted. The manufacture of water pipes based on stainless steel has a long history in developed countries. Stainless steel pipe has gradually become a new choice of water supply pipe with the characteristics of safety, sanitation, environmental protection, economy and applicability and has become the current world trend and development direction. Stainless steel water pipe is called the real green pipe in the st century. With the gradual standardization of stainless steel pipe industry, it can be predicted that the consumption technology and connection technology of stainless steel pipe will also slow down to standardization and become more and more perfect. The development of stainless steel pipe technology will not only create a favorable condition for health, environmental protection and sanitation for national domestic water, but also win a larger market for stainless steel pipe enterprises. Stainless steel pipe entering the construction and decoration market is an attack in the water pipe industry.Bayt Jala,Vickers hardness stainless steel pipe Vickers hardness test is also an indentation test, which can be used to determine the hardness of very thin metal materials and surface layers. It has the main advantages of Brinell and Rockwell methods and overcomes their basic disadvantages, but it is not as simple as Rockwell method. Vickers method is rarely used in steel pipe standards.Assembly: the sealing ring shall be correctly installed in the U-groove of the pipe fitting, put the pipe into the socket of the pipe fitting and wait for crimping.Model & mdash; It has better temperature resistance.


    MoronStainless steel braided mesh beltImprove indicators, reduce costs and increase production



    Various welding methods of combined welding stainless steel welded pipe have their own advantages and disadvantages. Combined welding methods include argon arc welding plus plasma welding, high-frequency welding plus plasma weldingBasic weight (density) / kg of steel plate: SPCC & mdash& mdash; Cold rolled carbon steel sheet and strip are generally used, which is equivalent to qa. The third letter C is the abbreviation of cold. When it is necessary to ensure the tensile test, add t at the end of the brand as spcct.The back is not protected by argon, and the flux cored wire + TIG process has been applied in China for several years. Flux cored wires such as et-elt-et-elt-t-et-elt- have been produced and applied to field welding, and good economic benefits have been obtained.superior quality,AUSTENITIC FERRITIC duplex stainless steel on the basis of austenitic stainless steel, appropriately increase Cr content and reduce Ni content, and cooperate with remelting treatment. High prices, various specifications of stainless steel plates, stainless steel coils, stainless steel belts and stainless steel tubes are supplied in time and cost-effective. It has become the preferred brand for many wire products. Welcome to buy! Stainless steel with duplex structure of austenite and ferrite (including ~ % & Delta; - ferrite) can be obtained. Typical steel grades include crniti, CrNiTi, etc. Duplex stainless steel has good weldability, no heat treatment is required after welding, due to the high Cr content, the vibration process of mold is matched with protective slag, which can improve the yield of %, save energy and shorten the production cycle, so as to improve the yield of molten steel.When water-soluble paper is used to block the ventilation, due to the ventilation from the weld center, the ventilation pipe shall be pulled out quickly at the later sealing link, and the residual argon inside shall be used for protection, so as to quickly finish the bottom and seal the mouth.


    MoronStainless steel braided mesh beltImprove indicators, reduce costs and increase production



    Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently, citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope,MoronInternal and external polishing of stainless steel pipe, energy spectrometer, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel belt, stainless steel pipe, high price, service, on-site settlement, honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore, this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation, silicon treatment and the combination of citric acid passivation and acid silicon system treatment, and discusses the corrosion resistance mechanism of different films on its surface, which can provide reference for the new direction of stainless steel surface treatment It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film, but also benefits from its double-layer film structure.Click to view,Various welding methods of combined welding stainless steel welded pipe have their own advantages and disadvantages. Combined welding methods include argon arc welding plus plasma welding, high-frequency welding plus plasma welding  — Ferritic stainless steel for decoration, such as automotive accessories. Good formability, but poor temperature resistance and corrosion resistance.The bright nickel layer on the stainless steel pipe is a silver white metal with slight yellow light. Its hardness is higher than that of copper,MoronStainless steel 904L plate, zinc, tin, cadmium, bright nickel can be directly plated without polishing but lower than that of chromium and rhodium. Bright nickel has high chemical stability in air and good stability to alkali. Using Brightener on stainless steel pipe so as to improve the hardness, wear resistance and leveling of the surface, make the appearance of stainless steel pipe consistent with other nickel plated parts, and avoid the corrosion of potential difference between stainless steel pipe and other bright nickel. After using bright nickel solution for a period of time, due to the of brightenerMoron,W = (outer diameter wall thickness) & times; wall thickness & times; . = KGM (weight per meter).In many construction sites, we use this kind of welding for priming, which can effectively ensure its quality and has certain construction difficulties. Therefore, careful and skilled welders should be selected for this work.. Raw material problem of stainless steel pipe. If the hardness is too low, it is not easy to polish (BQ is not good). If the hardness is too low, orange peel is easy to appear on the surface during deep drawing

    16An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  12. Pinar-del-rioStainless steel pipe cutterSmooth start but still weak

    Stainless steel pipes can be divided into CR series ( Series), Cr Ni series ( Series), Cr Mn Ni series ( Series) and precipitation hardening series ( Series). Series & mdash; Cr Ni Mn austenitic stainless steel series & mdash; Cr Ni austenitic stainless steel.Brinell hardness in stainless steel pipe standards, Brinell hardness is widely used, and the hardness of the material is often expressed by indentation diameter, which is intuitive and convenient. However, it is not suitable for steel pipes with hard or thin steel.Pinar-del-rio,In the building water supply pipe system, since the galvanized steel pipe has ended its glorious history of one hundred years, various new plastic pipes and composite pipes have developed rapidly. The professional stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe have advanced technology, strict testing, more affordable price and more preferential treatment. Welcome to consult. However, relevant experts: building water supply pipes will eventually return to the era of metal pipes. According to foreign application experience, stainless steel pipe is recognized as one of the pipes with good comprehensive performance in metal pipe. Chemical analysis: carry out chemical analysis on the chemical composition of the material, and the chemical composition meets the standard requirements.Only soluble paper or the combination of soluble paper and blocking plate is used for blocking ventilation protection (i.e. solid core welding wire + TIG + water-soluble paper)Haidijiao, MPa; R - stress, taking yield point of %, MPa; s - nominal wall thickness of steel pipe, mm; D - Nominal outer diameter of steel pipe, mm.Model & mdash; General model; stainless steel. The GB brand is CrNi.The protection mechanism of stainless steel backing wire + TIG process is that the back weld is protected by the metallurgical reaction of slag produced by welding wire melting and its alloy elements, and the front weld is protected by argon, slag and alloy elements.


    Pinar-del-rioStainless steel pipe cutterSmooth start but still weak



    The petrochemical industry, including the chemical fertilizer industry, has a great demand for stainless steel pipes. Stainless steel pipes are mainly used in this industry, including, , l, with an outer diameter of about ¢ - ¢ and a wall thickness of about mm-mm (generally medium and low pressure transmission pipes with a specification of more than & phi; mm). The specific application fields are: furnace pipes, material transmission pipes, heat exchanger pipes, even if the stress no longer increases, the steel or sample continues to have obvious plastic deformation. This phenomenon is called yield. Professional stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe ensure quality service and quality. Your satisfaction is our pursuit! Welcome to inquire The small stress value when yielding phenomenon occurs is the yield point. Let PS be the external force at the yield point s and fo be the cross-sectional area of the sample, then the yield point & sigma; s = PS / fo (MPA), MPa is called MPa, which is equal to n (Newton) / mm (MPA = pa, PA: Pascal = n / m.Austenitic stainless steel has good resistance to uniform corrosion, but there are still the following problems in local corrosion resistance: intergranular corrosion of austenitic stainless steel. Austenitic stainless steel will have intergranular corrosion when it is kept warm at ~ ℃ or cooled slowly. The higher the carbon content, the greater the tendency of intergranular corrosion. In addition, intergranular corrosion also occurs in the heat affected zone of the weldment. This is due to the precipitation of Cr rich CrC on the grain boundary. The chromium poor area is formed in the surrounding matrix, which is caused by corrosion of the primary cell. This intergranular corrosion phenomenon also exists in the ferritic stainless steel mentioned above.Installation conditions,The main control load of the platform has high requirements for the shear bearing capacity of the guide leg of the offshore platform. In order to study the factors affecting the shear capacity of the jacket legs of the stainless steel pipe in pipe concrete-filled steel tubular offshore platform, a total of concrete-filled steel tubular shear members were fabricated to study the effects of outer steel pipe material, concrete strength, void ratio and shear span ratio on the shear capacity of concrete-filled steel tubular in pipe. It is found that the shear strength of members increases with the decrease of void ratio and the increase of concrete strength; The larger the shear span ratio, the smaller the shear strength. Combined with the test, the empirical formula of shear capacity of concrete-filled steel tubular in pipe is proposed, which is analyzed and verified by ABAQUS finite element modeling software. The results show that the simulation is in good agreement with the test results. In order to study the axial compression performance of stainless steel tube concrete conduit leg and the axial compression performance of stainless steel concrete conduit leg, experiments are used to verify the correctness of the finite element model. The load displacement curves of specimens in groups were compared, and the effects of different void ratio, diameter thickness ratio and bone index on the axial compression performance of concrete-filled stainless steel tubular short columns under axial compression were analyzed. The results show that with the increase of concrete strength the bearing capacity of specimens increases, but the ductility of specimens decreases; With the increase of void ratio and diameter thickness ratio, the bearing capacity of the specimen decreases; The bearing capacity of stainless steel tube concrete can be effectively improved by adding steel bone; Increasing the bone matching index of steel bone can improve the bearing capacity of the specimen. Based on the jacket offshore platform, it is proposed to replace the four hollow steel conduit legs of the original offshore platform with concrete-filled steel tube in stainless steel tube to form a new composite offshore platform with concrete-filled steel tube in stainless steel tube, so as to improve the ice resistance and disaster prevention ability of the offshore platform. The scale test on the offshore platform shows that the composite offshore platform of concrete filled steel tubular in stainless steel pipe (hereinafter referred to as the composite offshore platform) has better anti icing performance than the ordinary jacket offshore platform. Taking push as an example, the peak acceleration and displacement of the upper deck of the composite offshore platform of concrete filled steel tubular in stainless steel pipe are reduced by % and % respectively. The analysis of ABAQUS finite element and experimental simulation results shows that the error of the two results can be basically within %. Through the simulation analysis of the ultimate bearing capacity of the stainless steel tube in tube concrete-filled steel tubular composite platform and the original offshore platform, it can be seen that the stainless steel tube in tube concrete-filled steel tubular composite platform has stronger ultimate bearing capacity. Therefore,Pinar-del-rioPe300 pipe price, the composite offshore platform of concrete-filled steel tube in stainless steel tube is a good new type of jacket offshore platform. Axial compression tests were carried out on austenitic and duplex stainless steel tube concrete short columns. The ultimate load, longitudinal strain and circumferential strain of the short columns under axial compression were measured. The effects of steel tube wall thickness and concrete strength on the bearing performance of the short columns were investigated. Reference was made to the European Code for design of concrete filled steel tubes (Eurocode), American code (ACI -) and Japanese code (aij-cft), China's relevant regulations D --dlt- and CECS calculate the preparation of stainless steel pipe construction, prepare construction scheme and construction schedule scheme, and establish quality standards.Crimping: during crimping, the convex part of the pipe fitting is placed in the concave groove of the die and the jaw is perpendicular to the pipe axis.After fine tuning the molten steel temperature in the argon blowing station, it is lifted to the ladle rotary table for continuous casting.


    Pinar-del-rioStainless steel pipe cutterSmooth start but still weak



    Stainless steel pipe is a kind of hollow long round steel, which is widely used in industrial transmission pipelines such as petroleum, chemical industry, medical treatment, food light industry, mechanical instruments and mechanical structural parts. In addition, when the bending and torsional strength are the same, the weight is relatively light. It provides L stainless steel pipe, s stainless steel pipe and L stainless steel pipe for a long time. It is an old brand of , with advantages in price and guaranteed quality It is also widely used in manufacturing mechanical parts and engineering structures. It is also commonly used as furniture kitchenware, etc.analysis,Stress relief treatment. Stress relief treatment is a heat treatment process to eliminate the residual stress of steel after cold working or welding. It is generally heated to ~ ℃ for tempering. For steels without stabilizing elements Ti and Nb, the heating temperature shall not exceed ℃,Pinar-del-rio8cr17 stainless steel plate, so as to avoid intergranular corrosion caused by chromium carbide precipitation. For cold worked and welded parts of ultra-low carbon and stainless steel containing Ti and Nb, they need to be heated at ~ ℃ and then cooled slowly to eliminate stress (the upper limit temperature is taken for eliminating welding stress), which can reduce the tendency of intergranular corrosion and improve the stress corrosion resistance of steel.Oxygen plus gas flame can not cut stainless steel plate because stainless steel is not easy to be oxidized.After fine tuning the molten steel temperature in the argon blowing station, it is lifted to the ladle rotary table for continuous casting.Pinar-del-rio,Stainless steel, precipitation hardening stainless steel and high alloy with iron content less than % are usually named by patent name or trademark.Stainless steel pipe is a kind of economical section steel and an important product in the iron and steel industry. It can be widely used in life decoration and industry. Many people on the market are used to make stair handrails, window guards, railings, furniture, etc. and materials are common.Standard classification - classification: national standard GB industry standard Yb local standard enterprise standard qcb- classification: product standard packaging standard basic standard - standard level (divided into three levels): y level: international advanced level I level: international general level H level: domestic advanced level - national standard: stainless steel bar (level I) gb- stainless welding disc Park (level H)

    17An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  13. Saint-LouisHot rolled stainless steel stripMarket demand is increasing
    the vibration process of mold is matched with protective slag

    The specific steps of continuous casting billet process of stainless steel pipe fittings are as follows: according to different steel grades, which can improve the yield of %, save energy and shorten the production cycle, window guards,Saint-LouisStainless steel shower pipe, railings, furniture, etc. and materials are common.Saint-Louis,Martensitic precipitation hardening stainless steel.Using CrO and hsoho as the main components and adding an appropriate amount of mnso.ho coloring solution, the chemical coloring of stainless steel industrial pipe was carried out. The effects of pretreatment process, coloring solution temperature, mass concentration and coloring time on the color film of stainless steel industrial pipe were discussed. Through a large number of experiments, a good formula and process range of coloring solution are obtained. With the increase of temperature and time, and the color changes are brown, blue, gold, purplish red and green. After curing and sealing treatment, the colored film of stainless steel industrial pipe has more uniform surface color, good reproducibility, and significantly improved wear resistance and corrosion resistance.Likasi,Saint-Louis304 seamless stainless steel pipe,The bearing capacity of decorative stainless steel pipe ice load is the main control load of offshore platform in severe cold area, which has high requirements for the shear bearing capacity of jacket leg of offshore platform. In order to study the factors affecting the shear capacity of the jacket legs of the stainless steel pipe in pipe concrete-filled steel tubular offshore platform, a total of concrete-filled steel tubular shear members were fabricated to study the effects of outer steel pipe material, concrete strength, void ratio and shear span ratio on the shear capacity of concrete-filled steel tubular in pipe. It is found that the shear strength of members increases with the decrease of void ratio and the increase of concrete strength; The larger the shear span ratio, the smaller the shear strength. Combined with the test, the empirical formula of shear capacity of concrete-filled steel tubular in pipe is proposed, which is analyzed and verified by ABAQUS finite element modeling software. The results show that the simulation is in good agreement with the test results. In order to study the axial compression performance of stainless steel tube concrete conduit leg and the axial compression performance of stainless steel concrete conduit leg, experiments are used to verify the correctness of the finite element model. The load displacement curves of specimens in groups were compared, and the effects of different void ratio, concrete strength, diameter thickness ratio and bone index on the axial compression performance of concrete-filled stainless steel tubular short columns under axial compression were analyzed. The results show that with the increase of concrete strength, the bearing capacity of specimens increases, but the ductility of specimens decreases; With the increase of void ratio and diameter thickness ratio, the bearing capacity of the specimen decreases; The bearing capacity of stainless steel tube concrete can be effectively improved by adding steel bone; Increasing the bone matching index of steel bone can improve the bearing capacity of the specimen. A compound forming process of double-layer stainless steel pipe for primary circuit main pipeline of station is designed, which solves the problem of limited length of finished products in traditional forging or casting process, and meets the special requirements of complex working environment on pipeline performance. The three roll cross rolling forming process of double-layer casing with outer layer -n austenitic heat-resistant stainless steel and inner layer cr-ni martensitic heat-resistant stainless steel was simulated and optimized by using DEFORM-D finite element simulation software. The internal and external deformation, stress-strain field and temperature field of double-layer stainless steel pipe were analyzed, and the optimal deformation parameter combination was obtained by orthogonal test. The simulation results show that in the process of three roll cross rolling, the large values of equivalent stress equivalent strain and temperature are concentrated in the area between the outer tube and the roll, and the overall performance parameters of the outer tube are greater than those of the inner tube. The range analysis and variance analysis of orthogonal design test show that the optimal deformation parameter is rough rolling temperature deg; C. Feed angle & deg;, Roll speed: rmin. Objective to improve the existing connection mode of the braking system pipe system of railway freight cars, and accurately shape the end of the stainless steel pipe, so as to obtain the forged joint with better mechanical properties. According to the connection mode of the original pipe system and the plastic forming characteristics of steel pipe, and the forging forming process is analyzed Series & mdash; Martensitic precipitation hardening stainless steel.Duplex stainless steel product description: This stainless steel has good corrosion resistance in urea carbamate solution and high stress corrosion cracking resistance in chloride environment. At the same time, the duplex stainless steel has excellent mechanical properties and can be used in plant construction with high safety requirements.


    Saint-LouisHot rolled stainless steel stripMarket demand is increasing



    After molten steel casting, stainless steel pipe fittings generally adopt the same vertical, vertical bending or arc continuous caster as carbon steel. The refined molten steel is poured into the ladle, the ladle to be poured is transferred above the tundish mouth through the rotary table, and then the molten steel is tundish through the long nozzle. The molten steel in tundish enters the mold through the submerged nozzle for forming, condensation and continuous downward movement.[(outer diameter wall thickness) wall thickness] . = kg m (weight per meter)Model & mdash; After that, the second widely used steel is mainly used in food industry and surgical equipment. Molybdenum is added to obtain a special corrosion-resistant structure. Because it has better chloride corrosion resistance than it, it is also made & ldquo; Marine Steel & rdquo; To use. SS is usually used in nuclear fuel recovery units. Grade stainless steel generally meets this application grade.Customer first,Saint-Louis304 stainless steel seamless pipe,High frequency welding high frequency welding: with relatively high power supply, it can reach a higher welding speed for steel pipes with different materials outer diameter and wall thickness. Compared with argon arc welding, it is more than ten times its high welding speed. Therefore stainless steel pipes for common use have a higher consumption rate. Due to the high speed of high frequency welding, it is difficult to remove burrs in welded pipes. At present, which is also one of the reasons.Construction materials shall be prepared and delivered to the site according to the data scheme, and shall be supplied according to the scheme.Deformation strengthening of austenitic stainless steel stainless steel has good cold deformation performance. It can be cold drawn into very thin steel wire and cold rolled into very thin steel strip or steel pipe. After a large amount of deformation, the strength of the steel is greatly improved, especially when rolling in the subzero temperature zone. The tensile strength can reach more than MPa. This is because in addition to the cold hardening effect, there are also superimposed Deformation induced M transition.


    Saint-LouisHot rolled stainless steel stripMarket demand is increasing



    Construction materials shall be prepared and delivered to the site according to the data scheme, and shall be supplied according to the scheme.Quality inspection report,This material without titanium and niobium has an inherent tendency of intergranular corrosion. Intergranular corrosion can be reduced by adding titanium and niobium and stabilizing treatment. It is a kind of high alloy steel that can corrode in air or chemical corrosive medium. Stainless steel has beautiful surface and good corrosion resistance. It does not have to undergo surface treatment such as color plating to play a role of rust freeChina's numbering rules adopt the use of element symbols and Chinese pinyin. Open hearth steel: P, boiling steel: killed steel: class a steel: T: Special: ball bonded steel and spring steel, such as CrMnTi simn, (C content is expressed in tens of thousands)Body austenitic stainless steel seamless steel pipe and welded steel pipe stainless steel pipe for mechanical structure stainless steel pipe for ordinary pipe stainless steel pipe for boiler, stainless steel pipe for heat exchanger and seamless steel pipe for chemical industry (crnit) qhyad crnimosi duplex stainless steel seamless steel pipe. Stainless steel is mainly used in the automobile industry, accounting for more than % of the total consumption of automobile stainless steel, and % is ferritic stainless steel. The exhaust gas produced by automobile engine is from the rear of intake pipe, front pipe, hose, converter and center pipe. The common steel grades of exhaust system are L, l, etc. it is mainly used in automobiles Stainless steel welded pipe. It is estimated that the stainless steel pipe used in automobile accounts for about % of the consumption of stainless steel pipe in the whole downstream. L stainless steel pipe, s stainless steel pipe and L stainless steel pipe are provided for a long time. The products are complete, excellent quality and favorable price. The use ratio of stainless steel pipe and welded pipe is about :.Saint-Louis,AUSTENITIC FERRITIC duplex stainless steel on the basis of austenitic stainless steel, appropriately increase Cr content and reduce Ni content, and cooperate with remelting treatment. High prices, various specifications of stainless steel plates, stainless steel coils, stainless steel belts and stainless steel tubes are supplied in time and cost-effective. It has become the preferred brand for many wire products. Welcome to buy! Stainless steel with duplex structure of austenite and ferrite (including ~ % & Delta; - ferrite) can be obtained. Typical steel grades include crniti, CrNiTi, ocrnimoti, no heat treatment is required after welding, and its tendency of intergranular corrosion and stress corrosion is also small. However, due to the high Cr content, it is easy to form & sigma; Pay attention when using.Duplex stainless steel product description: This stainless steel has good corrosion resistance in urea carbamate solution and high stress corrosion cracking resistance in chloride environment. At the same time the duplex stainless steel has excellent mechanical properties and can be used in plant construction with high safety requirements.W = (outer diameter wall thickness) & times; wall thickness & times; . = KGM (weight per meter).

    18An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  14. Santa-ClaraStainless steel conduitSeveral test methods leaked

    The slab solidified on the surface continues to be rapidly cooled through the secondary cooling section until the core becomes solid and the whole continuous casting process of stainless steel pipe fittings is completed.Application field: launch the market plan of stainless steel pipe in the target market of new products, such as stainless steel kitchen equipment.Santa-Clara,Windproof and ventilation. Where there is wind, please take measures to block the net, and take appropriate ventilation measures indoors.After that, the second widely used steel is mainly used in food industry, pharmaceutical industry and surgical equipment. Adding molybdenum makes it obtain a special corrosion-resistant structure. Because it has better chloride corrosion resistance than stainless steel pipe, it is also used as & ldquo; marine steel & rdquo;. SS is usually used in nuclear fuel recovery devices. Grade stainless steel Steel pipes usually also meet this application level.Feira de Santana,The corrosion resistance of stainless steel depends on chromium but because chromium is an integral part of steel, the protection is different.And stainless steel are molybdenum containing stainless steels. The molybdenum content of stainless steel is slightly higher than that of stainless steel. Due to the molybdenum content in stainless steel, the overall performance of this steel is better than that of and stainless steel. Under high temperature conditions, when the concentration is lower than % and higher than %, stainless steel has a wide range of applications. Stainless steel also has good chloride corrosion resistance, so it is usually used in marine environment.Household worries.


    Santa-ClaraStainless steel conduitSeveral test methods leaked



    First of all, let's understand what stainless steel is. Generally speaking, steel that will not rust is called stainless steel, but in an academic sense, steel resistant to weak corrosive media such as air, steam and water and chemical corrosive media such as acid,Santa-ClaraStainless steel pipe cutter, alkali and salt. Also known as stainless acid resistant steel. In practical application, the steel resistant to weak corrosion medium is often called stainless steel, while the steel resistant to chemical medium is called acid resistant steel. Due to the difference in chemical composition between the two, the former is not necessarily resistant to chemical medium corrosion, while the latter is generally stainless. The corrosion resistance of stainless steel depends on the alloying elements contained in the steel. Chromium is the basic element for stainless steel to obtain corrosion resistance. When the chromium content in the steel reaches about %,Santa-ClaraStainless steel 316 steel pipe, chromium reacts with oxygen in the corrosive medium to form a thin oxide film (self passivation film) on the steel surface, which can prevent further corrosion of the steel matrix. In addition to chromium, the commonly used alloy elements include nickel, molybdenum, titanium, niobium copper, nitrogen, so as to meet the requirements of various uses on the microstructure and properties of stainless steel.  — The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.Deburring: after the pipe is cut off, the burr shall be removed to avoid cutting the sealing ring.Where can I find it?,Stainless steel pipe is safe, reliable, economical and applicable. The successful development of pipeline and new reliable, simple and convenient connection makes it have more irreplaceable advantages of other pipes. It will be used more and more in engineering, and the use will be more and more popular. It has a good prospect.Construction materials shall be prepared and delivered to the site according to the data scheme, and shall be supplied according to the scheme.The protection mechanism of stainless steel backing wire + TIG process is that the back weld is protected by the metallurgical reaction of slag produced by welding wire melting and its alloy elements, and the front weld is protected by argon, slag and alloy elements.


    Santa-ClaraStainless steel conduitSeveral test methods leaked



    Model & mdash; The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.Where can I find it?,Application field: tubular boiler for pipeline in harsh seabed environment product description: ultra (ultra) critical unit is the basis of modernization of power generation equipment and energy conservation and emission reduction. Among the important pressure parts of ultra (supercritical) boiler, superheater and reheater are the parts with high working temperature and bad working environment. Previously all such materials used in China were imported from abroad, while only steel material manufacturers in the world have limited capacity. Such materials have a large gap, expensive import prices, difficult procurement and short supply, which seriously affected the production of ultra supercritical boilers and the development of electric energy in China. At present, China's demand for utility boiler tubes is about tons, and with the continuous improvement of ultra (supercritical) power generation technology, and have made considerable achievements. On the one hand, it has made its own contribution to the development of national electric power industry, but also brought considerable economic benefits to enterprises.Stainless steel is a common steel in stainless steel, excellent processing performance and good toughness, so it is made into a frequently used steel. Common in life are stainless steel pipe, stainless steel plate, stainless steel coil and other building materials. As a very important building material, stainless steel is widely used in industry, construction industry, home decoration industry and food and medical industry. It is one of the indispensable materials in life! So what items are made of stainless steel in our life? Let's have a look!Human factors are also one of the causes of product oxidation that some consumers often encounter when using stainless steel products. Some consumers operate improperly in product use and maintenance, especially some stainless steel pipe products used in food and chemical equipment industry. For the artificially generated oxidation of steel products, they should have correct product use knowledge and Reasonable and effective maintenance shall be carried out regularly to reduce oxidation caused by improper use.Santa-Clara,CE--“ Code for design of cold formed stainless steel structural parts & rdquo; And & ldquo; jointly published by nidi and euro inox; Structural stainless steel design manual & rdquo; The design of structural parts for buildings with long service life and good integrity has been simplified.Model & mdash; The addition of sulfur improves the processability of the material.. It is our responsibility not to pay attention to the maintenance of the pipe during transportation, mix the pipe with corroded chemical commodities, or soak the two water into the packaging film during transportation in rainy days, which will cause rust. . It is the responsibility of the processor and manufacturer. When cutting stainless steel or iron when manufacturing goods,Santa-Clara316 stainless steel decorative pipe, the scrap iron will cause rust on the surface of the steel pipe. Therefore, it is only reasonable for highly skilled technicians to deepen investigation and discussion, make a reasonable division of responsibilities, and who should be responsible for whose achievements. You can't let steel mills, pipe factories, processors, or users bear the liability for compensation!

    19An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  15. ArtemisaWuxi stainless steel beltWhat are the technical requirements

    The selection of pipes and fittings for welding data preparation shall be based on the quality elements of the application environment, chemical composition and application pressure, and the commodities of corresponding grades shall be selected to ensure the weld metal structure and machine function.Model & mdash; Commonly used precipitation hardening stainless steel model, usually also called -; %Cr,%Ni.Artemisa,Check the clamping forming effect after each clamping, and there shall be no clamping in place or serious depression of pipe clamping. According to visual inspection, the pipe fitting end and the pipe are tightly bonded. The smaller the diameter of the diamond edge of the pipe fitting above DN is slightly smaller than the outer diameter of the pipe, ranging from .-mm. The larger the pipe diameter, it will be difficult to ventilate on both sides of the weld. At this time how to ensure the argon filling protection on the inner side of the weld has become a difficult problem. For a long time, facing the national high price, the reasonable price and perfect service of all kinds of stainless steel plates, stainless steel coils, stainless steel belts and stainless steel pipes have been recognized by the majority of customers. In the actual construction on site, we use two welding joints The above problems were successfully solved by plugging with water-soluble paper on the side, ventilation from the weld center and sealing with adhesive tape on the outside (see Table ).Soignies,At present, stainless steel backing is divided into two processes: back argon filling and non argon filling. Back argon filling protection can be divided into solid wire + TIG process and solid wire + TIG + water-soluble paper process; The back non argon filling protection is also divided into flux cored wire backing welding and welding rod (flux coated wire) backing TIG welding.As long as the steel type is selected correctly and maintained properly stainless steel will not produce corrosion, pitting, corrosion or wear. Stainless steel is also one of the high-strength materials in metal materials for construction. Because stainless steel has good corrosion resistance it can ensure that the structural components can maintain the integrity of engineering design. Chromium containing stainless steel also integrates mechanical strength and high extensibility and is easy to wear The processing and manufacturing of parts can be fullModel & mdash; other properties are similar except that the risk of weld corrosion is reduced due to the addition of titanium.


    ArtemisaWuxi stainless steel beltWhat are the technical requirements



    There shall be a special storage rack. The storage rack shall be a wooden or painted carbon steel support or padded with rubber pad to isolate it from carbon steel and other metal materials. During storage, the storage position shall be convenient for lifting and absolutely isolated from other data storage areas. Protective measures shall be taken to avoid purification, collision with other components, purification and damage of iron metal.According to the purpose, it is mainly divided into oil well pipe (casing, oil pipe and drill pipe), pipeline pipe, boiler pipe, mechanical structure pipe, hydraulic prop pipe, geological pipe, chemical pipe (high-pressure fertilizer pipe, petroleum cracking pipe) and marine pipe. Calculation formula for weight of stainless steel square tube: (nozzle perimeter - actual thickness) actual thickness is ., of which . is a constant converted from stainless steel density.Construction materials shall be prepared and delivered to the site according to the data scheme, and shall be supplied according to the scheme.equipment maintenance ,After fine tuning the molten steel temperature in the argon blowing station, it is lifted to the ladle rotary table for continuous casting.Deformation strengthening of austenitic stainless steel stainless steel has good cold deformation performance. It can be cold drawn into very thin steel wire and cold rolled into very thin steel strip or steel pipe. After a large amount of deformation, the strength of the steel is greatly improved, especially when rolling in the subzero temperature zone. The tensile strength can reach more than MPa. This is because in addition to the cold hardening effect, there are also superimposed Deformation induced M transition.Welding, high frequency preheating plus three torch argon arc welding, high frequency preheating plus plasma argon arc welding. The progress of combined welding is very significant. As for the combined welding of steel pipe with high-frequency preheating, the weld quality is equivalent to the conventional argon arc welding and plasma welding, the welding operation is complex and the whole welding is easy to complete automation. This combination is easy to connect with the existing high-frequency welding equipment, with low investment cost and good benefit.


    ArtemisaWuxi stainless steel beltWhat are the technical requirements



    In the building water supply pipe system,Artemisa321 stainless steel pipe manufacturer, due to the end of the glorious history of galvanized steel pipe, various new plastic pipes and composite pipes have developed rapidly, but various pipes still have some deficiencies in varying degrees,Artemisa1.5 'stainless steel hose, which are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. Therefore, relevant experts: building water supply pipes will eventually return to the era of metal pipes. According to foreign application experience, stainless steel pipe is recognized as one of the pipes with good comprehensive performance in metal pipe.Product line,The intergranular corrosion of austenitic stainless steel can be prevented by adding Ti, Nb and other elements that can form stable carbides (tic or NBC) and avoiding the precipitation of crc on the grain boundary.The packaging itself requires manufacturing costs, and the cost of packaging requires labor costs, the sum of which exceeds the weight of a single bag.That is stainless steel. The GB brand is CrNi. & mdash; it has better temperature resistance than it.Artemisa, the content of impurities such as P,ArtemisaMetal mesh with stainless steel 304, Sb, Bi and as should be reduced as much as possible. In addition, A-F dual phase steel can be selected, which does not correspond to stress corrosion in Cl - and oh - media. The initial micro crack will not continue to expand after encountering ferrite phase, and the ferrite content should be about % .The protection mechanism of stainless steel backing wire + TIG process is that the back weld is protected by the metallurgical reaction of slag produced by welding wire melting and its alloy elements, and the front weld is protected by argon, Cr Ni series ( Series), Cr Mn Ni series ( Series) and precipitation hardening series ( Series). Series & mdash; Cr Ni Mn austenitic stainless steel series & mdash; Cr Ni austenitic stainless steel.

    19An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  16. GuantanamoStainless steel chimney tubeWith filtering performance in the industry

    Stainless steel pipes can be divided into CR series ( Series), Cr Ni series ( Series), Cr Mn Ni series ( Series) and precipitation hardening series ( Series). Series & mdash; Cr Ni Mn austenitic stainless steel series & mdash; Cr Ni austenitic stainless steel.Indicates that the chemical composition is represented by international chemical element symbols and national symbols, and the composition content is represented by letters: for example, China and Russia use fixed digit numbers to represent steel series or numbers; For example, the United States Japan, series and series; The serial number is composed of Latin letters and order series, which only indicates the purpose.Guantanamo, it is rolled by cold rolling mill at room temperature. General thickness & amp; lt; .mm~mm& gt;, high dimensional accuracy and good mechanical properties. Most products are rolled and can be processed into coated steel plate; Production process of cold rolled stainless steel strip / coil: . Pickling → . Normal temperature rolling → . Process → . Annealing → . Leveling → ⒍ fine cutting → ⒎ packaging → . Reach customers.The scale pretreatment of stainless steel pipe makes the scale loose, and then acid pickling is carried out for easy removal. The pretreatment can be divided into the following: alkaline salt melting treatment method. The alkaline melt contains % hydroxide and % salt. The proportion of the two in the molten salt shall be strict, so that the molten salt has strong oxidizing power, low melting point and small viscosity. Only the sodium halo shall be analyzed in the production process, and the content shall not be less than % (wt) It is treated in a salt bath furnace at ~ ℃ for minutes for ferritic stainless steel and minutes for austenitic stainless steel. Similarly, iron oxides and spinels can also be oxidized by salt to become loose ferric oxide, which is easy to be removed during acid pickling. Due to the action of high temperature, some of the formed oxides peel off and sink to the furnace bottom in the form of sediment. Alkaline salt melting pretreatment Process flow: steam degreasing → preheating ( ~ ℃, time ~ min) ↠ molten salt treatment & rarr; water quenching & rarr; hot water washing. Molten salt treatment is not suitable for assemblies with weld gap or crimping. When the parts are taken out of the molten salt furnace, a stream of alkali and salt mist will be splashed during water quenching, so deep well anti splash water quenching tank shall be used during water quenching. During water quenching, firstly lift the parts basket into the tank, stop above the horizontal plane, close the tank cover, and then lower the parts basket into the water, Professional L stainless steel pipe, s stainless steel pipe and L stainless steel pipe are stable, safe, reliable and maintenance free. The technical level has reached the domestic level and the international advanced level of similar products until submerged.Maine-Soroa,Construction materials shall be prepared and delivered to the site according to the data scheme, and shall be supplied according to the scheme.Standard classification - classification: national standard GB industry standard Yb local standard enterprise standard qcb- classification: product standard packaging standard basic standard - standard level (divided into three levels): y level: international advanced level I level: international general level H level: domestic advanced level - national standard: stainless steel bar (level I) gb- stainless welding disc Park (level H)Model & mdash; It has better temperature resistance.


    GuantanamoStainless steel chimney tubeWith filtering performance in the industry



    Meet the needs of architects and structural designers.Usage: it is widely used in automobile industry, aviation industry and other departments.According to the purpose,GuantanamoStainless steel heat exchanger tube, it can be divided into oil well pipe (casing, oil pipe and drill pipe), pipeline pipe, boiler pipe, mechanical structure pipe, hydraulic prop pipe, gas cylinder pipe, geological pipe, chemical pipe (high-pressure chemical fertilizer pipe, petroleum cracking pipe) and marine pipe.Application process,That is stainless steel. The GB brand is CrNi. & mdash; it has better temperature resistance than it.Stainless steel pipes are divided into ordinary carbon steel pipes,GuantanamoStainless steel corrugated gas pipe, high-quality carbon structural steel pipes, alloy structural pipes, alloy steel pipes, bearing steel pipes, stainless steel pipes, bimetallic composite pipes, coated and coated pipes to save precious metals and meet special requirements. Stainless steel pipes have a wide variety, different uses different technical requirements and different production. The outer diameter range of steel pipe currently produced is . & mdash; mm, wall thickness range . ~ mm. In order to distinguish its characteristics, we specialize in providing quality assurance for L stainless steel pipe, s stainless steel pipe and L stainless steel pipe. During the preferential activities, new and old customers are welcome to consult. Steel pipes are usually classified according to the following.Bidirectional Product Description: the tensile strength of the material is ~ mpa, and the high working temperature can reach ℃.


    GuantanamoStainless steel chimney tubeWith filtering performance in the industry



    Production process of stainless steel pipe A. preparation of round steel; b. Heating; c. Hot rolling perforation; d. Cutting head; e. Pickling; f. Grinding; g.; h. Cold rolling; i. Degreasing; j. Solution heat treatment; k. Straightening; l. Pipe cutting; m. Pickling; n. Finished product inspection.new product,GuantanamoStainless steel color oil plate,In order to ensure the appearance quality of continuous casting slab, select appropriate maintenance slag; During continuous casting, the vibration marks formed on the surface of continuous casting slab due to the vibration of mold shall be; Electromagnetic stirring must be used in continuous casting of ferritic stainless steel pipe fittings.Stainless steel capillary material: SUS / sus; Inner diameter mm-mm, polished. Purpose of stainless steel capillary: automatic instrument signal tube, automatic instrument wire protection tube; Precision optical ruler circuit industrial sensor, electronic equipment circuit protection tube; Safety protection of electrical circuit, capillary protection of thermal instrument and internal support of air core high-voltage optical cable. Stainless steel capillary characteristics: it has good resistance, corrosion resistance, high temperature resistance, tensile resistance, water resistance, and provides excellent electromagnetic shielding performance. Stainless steel hose can be bent into various angles and radius of curvature, and has the same durability and durability in all directions; The stainless steel hose has flexible pitch, good flexibility and no blocking and stiffness; The stainless steel threading hose has certain tension resistance between the side buckles of each section to prevent the internal laying of the hose from outside. It is a special product manufacturing enterprise integrating R & D, stainless steel coil and stainless steel belt, Stainless steel pipe. The axial tension can withstand times of the nominal inner diameter. The yield strength of duplex stainless steel is more than twice that of ordinary austenitic stainless steel. This characteristic makes the designer reduce the weight when designing products making this alloy more cost-effective than L. This alloy is especially suitable for - DEG; F/+° F temperature range. For applications beyond this temperature range, this alloy can also be considered, but there are some, especially for welded structures& middot; Pressure vessel, high pressure storage tank, high pressure pipeline, heat exchanger (chemical processing industry).The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.Guantanamo,Stainless steel pipes can be divided into CR series ( Series), Cr Mn Ni series ( Series) and precipitation hardening series ( Series). Series & mdash; Cr Ni Mn austenitic stainless steel series & mdash; Cr Ni austenitic stainless steel.Brinell hardness in stainless steel pipe standards, Brinell hardness is widely used, and the hardness of the material is often expressed by indentation diameter, which is intuitive and convenient. However, it is not suitable for steel pipes with hard or thin steel.Human factors are also one of the causes of product oxidation that some consumers often encounter when using stainless steel products. Some consumers operate improperly in product use and maintenance, especially some stainless steel pipe products used in food and chemical equipment industry. For the artificially generated oxidation of steel products, they should have correct product use knowledge and Reasonable and effective maintenance shall be carried out regularly to reduce oxidation caused by improper use.

    19An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  17. Gueines430 stainless steel stripProcess advantages

    ;- Ferromagnetism due to m transformation shall be considered in use (such as in instrument parts).The back is not protected by argon, and the flux cored wire + TIG process has been applied in China for several years. Flux cored wires such as et-elt-et-elt-t-et-elt- have been produced and applied to field welding, and good economic benefits have been obtained.Gueines,This kind of steel pipe can be divided into stainless steel seamless steel pipe and stainless steel welded steel pipe (slotted pipe). According to different manufacturing processes,Gueines302 stainless steel pipe, it can be divided into several basic types: hot rolling, cold drawing and cold rolling. According to the section shape, it can be divided into circular pipe and special-shaped pipe. Circular steel pipe is widely used, but there are also some square, rectangular, semicircular, hexagonal, equilateral triangle Octagonal and other special-shaped stainless steel pipes.There are three main reasons for oxidation of stainless steel: production process, which is one of the reasons for oxidation of steel products. In terms of production process and product characteristics forming a thin oxide film on the product surface is the basic process to avoid oxidation, and it is also one of the main characteristics of steel products different from other steel products. It is specialized in products, renewable resources business and business package Including: stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe. However, when the oxide film is incomplete and discontinuous due to insufficient or negligent production process, the oxygen in the air will directly react with some elements in the product, resulting in the appearance of oxidation of the product.Zanjan, Series & mdash; Heat resistant chromium alloy steel.The operators are mainly plumbers and argon arc welders, with the cooperation of other types of work, and the argon arc welder shall have the certificate issued by relevant departments.The American Iron and Steel Institute uses three digits to identify various standard grades of malleable stainless steel. Among them, austenitic stainless steel is marked with numbers of and series. For example, some ordinary austenitic stainless steel is marked with and.


    Gueines430 stainless steel stripProcess advantages



    Therefore, the field with high utilization rate of stainless steel with high competitiveness and comprehensive quality will also be an important part of the plan.Steel strip material: different steel strip materials determine the quality of stainless steel, which is a major factor affecting the price of stainless steel at present.High frequency welding high frequency welding: with relatively high power supply, it can reach a higher welding speed for steel pipes with different materials, outer diameter and wall thickness. Compared with argon arc welding, it is more than ten times its high welding speed. Therefore, stainless steel pipes for common use have a higher consumption rate. Due to the high speed of high frequency welding, it is difficult to remove burrs in welded pipes. At present, high frequency welding Welded stainless steel pipe can not be borne by chemical and nuclear industries, which is also one of the reasons.Inspection environment,Model & mdash; High strength cutting tool steel, with slightly higher carbon content, can obtain higher yield strength after appropriate heat treatment, and the hardness can reach hrc. It belongs to hard stainless steel. A common application example is & ldquo; Shaving blade & rdquo;. There are three common models: C and f (easy to process).Stainless steel pipe cost = actual thickness divided by thickness adjustment price + freight + processing fee. Coil price is switched to flat plate price = coil price, thickness adjustment - leveling fee . Coil length = coil net weight . Coil width. Actual thickness including tax price algorithm = total weight of goods ( represents points, is points);- Ferromagnetism due to m transformation shall be considered in use (such as in instrument parts).


    Gueines430 stainless steel stripProcess advantages



    Stainless steel pipe can be divided into equal section pipe and variable section pipe according to the profile shape. Variable section pipes include conical pipes, stepped pipes and periodic section pipes.Recommendation and consultation,GueinesStainless steel plastic lined pipe,Restate the quality of stainless steel pipe, such as stainless steel pipe, we promise & ldquo; chromium and nickel & rdquo; Penalty for false and provide quality inspection report and certificate of conformity.The dual phase microstructure of stress corrosion resistant stainless steel is helpful to improve the stress corrosion cracking resistance of stainless steel. In the presence of certain temperature, stress, oxygen and chloride chloride stress corrosion will occur in austenitic stainless steel. Since these conditions are not easy, the use of L and L is limited in this regard.Stabilization treatment. Generally, it is used for - steel containing Ti and Nb in the solid solution treatment line. After the solid treatment, the steel is heated to ~ ℃ for heat preservation and air cooling. At this time, the carbides of Cr are completely dissolved, while the carbides of titanium removal are not completely dissolved, and they are fully precipitated during the cooling process, so that it is impossible for the carbon to form chromium carbides again. Professional L stainless steel pipe, s stainless steel pipe and L stainless steel pipe ensure the quality, Guarantee service. Guarantee quality. Your satisfaction is our pursuit! Welcome to inquire. Therefore, intergranular corrosion is effectively eliminated.Gueines,The scale pretreatment of stainless steel pipe makes the scale loose, and then acid pickling is carried out for easy removal. The pretreatment can be divided into the following: alkaline salt melting treatment method. The alkaline melt contains % hydroxide and % salt. The proportion of the two in the molten salt shall be strict, so that the molten salt has strong oxidizing power, and the content shall not be less than % (wt) It is treated in a salt bath furnace at ~ ℃ for minutes for ferritic stainless steel and minutes for austenitic stainless steel. Similarly, iron oxides and spinels can also be oxidized by salt to become loose ferric oxide, which is easy to be removed during acid pickling. Due to the action of high temperature, some of the formed oxides peel off and sink to the furnace bottom in the form of sediment. Alkaline salt melting pretreatment Process flow: steam degreasing → preheating ( ~ ℃, time ~ min) ↠ molten salt treatment & rarr; water quenching & rarr; hot water washing. Molten salt treatment is not suitable for assemblies with weld gap or crimping. When the parts are taken out of the molten salt furnace, a stream of alkali and salt mist will be splashed during water quenching so deep well anti splash water quenching tank shall be used during water quenching. During water quenching, firstly lift the parts basket into the tank, stop above the horizontal plane, close the tank cover,GueinesStainless steel pipe elbow, and then lower the parts basket into the water, Professional L stainless steel pipe, s stainless steel pipe and L stainless steel pipe are stable, safe, reliable and maintenance free. The technical level has reached the domestic level and the international advanced level of similar products until submerged.According to the purpose, boiler pipe pipeline pipe, mechanical structure pipe hydraulic prop pipe, gas cylinder pipe, geological pipe, chemical pipe (high-pressure chemical fertilizer pipe, petroleum cracking pipe) and marine pipe.. It is our responsibility not to pay attention to the maintenance of the pipe during transportation, mix the pipe with corroded chemical commodities, or soak the two water into the packaging film during transportation in rainy days, which will cause rust. . It is the responsibility of the processor and manufacturer. When cutting stainless steel or iron when manufacturing goods, the scrap iron will cause rust on the surface of the steel pipe. Therefore, it is only reasonable for highly skilled technicians to deepen investigation and discussion, make a reasonable division of responsibilities, pipe factories, processors, or users bear the liability for compensation!

    21An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  18. Santiago-de-CubaStainless steel thin wall pipeMore favorable price

    During welding, the process of ventilation in advance and gas stop behind shall be adopted, and the adhesive cloth on the outside shall be torn off while welding. Because the blocking plate is composed of rubber and white iron sheet, it is not easy to be damaged, so this welding can well ensure that the inner side of the weld is filled with argon and its purity, so as to effectively ensure that the metal on the inner side of the weld is not oxidized and ensure the quality of weld backing welding.Stainless steel tube for boiler tube and heat exchanger (gjb- (yb-) aviation structural tube, thick wall seamless steel tube (gjb- (yb-) aviation stainless steel tube (ybt-) (yb-) aviation a blind rivet seamless steel tube (gjb- (yb-) aviation structural tube, seamless steel tube (ybt- (yb- aviation conduit A seamless steel pipe small diameter stainless steel pipe seamless steel pipe for high pressure boiler low and medium pressure boiler pipe stainless acid resistant extremely seamless steel pipe seamless steel pipe for petroleum cracking seamless steel boiler and heat exchanger Ferritic and austenitic alloy pipe general purpose austenitic stainless steel pipe and welded pipe austenitic stainless steel seamless steel pipe welded steel pipe welded steel pipe carbon steel, Ferritic and austenitic alloy steel pipe) General requirements General requirements for ferrous and alloy steels for special purposes General requirements for carbonSantiago-de-Cuba,No matter under dynamic load or static load, it has higher energy absorption capacity than austenitic stainless steel, which has obvious advantages and practical application value for structural parts to deal with sudden accidents such as collision, etc. Compared with austenitic stainless steel, duplex stainless steel has the following disadvantages: its universality and versatility are not as good as austenitic stainless steel. For example, its service temperature must be below ℃.Standard classification - classification: national standard GB industry standard Yb local standard enterprise standard qcb- classification: product standard packaging standard basic standard - standard level (divided into three levels): y level: international advanced level I level: international general level H level: domestic advanced level - national standard: stainless steel bar (level I) gb- stainless welding disc Park (level H)Nivala,The experimental ice load of concrete decorated stainless steel pipe is the highest in the cold areaStainless steel pipe is safe, reliable, hygienic, environmentally friendly, economical and applicable. The successful development of pipeline and new reliable, simple and convenient connection makes it have more irreplaceable advantages of other pipes. It will be used more and more in engineering, and the use will be more and more popular. It has a good prospect.Production process of stainless steel welded pipe: raw material - strip - welded pipe - end repair - polishing - Inspection (spray printing) - Packaging - shipment (warehousing) (decorative welded pipe).


    Santiago-de-CubaStainless steel thin wall pipeMore favorable price



    Model & mdash; It has better temperature resistance.In view of the continuous vibration of stainless steel pipe shopping malls, even & ldquo; Roller coaster & rdquo; Market, stainless steel pipe market participants are implementing it carefully & ldquo; Fast forward and fast Exit & rdquo; Therefore, the national stainless steel pipeline inventory has been at a low level. High price various specifications of stainless steel plate, stainless steel coil, industrial companies, enterprises and power departments are welcome to visit and negotiate with the company! At the beginning, the social inventory of stainless steel pipes should progress with the progress of economic aggregate, and with the progress of total output and demand. However, stainless steel pipe inventory did not increase too much or even did not increase, indicating a relative decline in social inventory level. Low inventory has indeed played a role in market stability.First of all, let's understand what stainless steel is. Generally speaking, steel that will not rust is called stainless steel, but in an academic sense, steel resistant to weak corrosive media such as air, steam and water and chemical corrosive media such as acid, alkali and salt. Also known as stainless acid resistant steel. In practical application, while the steel resistant to chemical medium is called acid resistant steel. Due to the difference in chemical composition between the two, the former is not necessarily resistant to chemical medium corrosion, while the latter is generally stainless. The corrosion resistance of stainless steel depends on the alloying elements contained in the steel. Chromium is the basic element for stainless steel to obtain corrosion resistance. When the chromium content in the steel reaches about %, chromium reacts with oxygen in the corrosive medium to form a thin oxide film (self passivation film) on the steel surface which can prevent further corrosion of the steel matrix. In addition to chromium, the commonly used alloy elements include nickel, molybdenum,Santiago-de-CubaDN25 stainless steel pipe, titanium, copper, nitrogen, etc., so as to meet the requirements of various uses on the microstructure and properties of stainless steel.Credit guaranteeDeformation strengthening of austenitic stainless steel stainless steel has good cold deformation performance. It can be cold drawn into very thin steel wire and cold rolled into very thin steel strip or steel pipe. After a large amount of deformation, especially when rolling in the subzero temperature zone. The tensile strength can reach more than MPa. This is because in addition to the cold hardening effect the strength of the steel is greatly improved, there are also superimposed Deformation induced M transition.When improved, it is possible to use it in refrigeration related engineering. Recently, suslx (cr Ti, Nb LC) and susl have been applied to frozen shells. Ferritic stainless steel has body centered cubic structure. When the material properties become weaker, sharp cracks will expand rapidly and cause brittleness. Austenitic series stainless steel will not produce brittleness because it has face centered cubic structure. Austrian stainless steel SUSL (cr-ni LC) and SUSL (cr-ni-mo-lc) shows that it still has superior impact characteristics at low temperature. However, pay attention to the precipitation of ferrite or martensite due to processing, and the tendency of embrittlement due to sensitized carbide or & sigma; equal heterogeneous precipitation.Stainless steel pipes and water transmission equipment for fluid transportation such as water and gas are advanced basic water purification materials in the world. They have strong anti-corrosion performance, which can not be compared with cast iron pipes, carbon steel pipes and plastic pipes.


    Santiago-de-CubaStainless steel thin wall pipeMore favorable price



    Stainless steel has two classifications: one is divided into chromium stainless steel and chromium nickel stainless steel according to the characteristics of alloy elements; The other is divided into m stainless steel,Santiago-de-CubaPrice of stainless steel round pipe,Santiago-de-Cuba310S stainless steel plate unit price, f stainless steel, a stainless steel and A-F duplex stainless steel according to the microstructure of steel in normalized state.Quality recommendation,No solution treatment. The alloy elements do not dissolve into the matrix, it is subject to heat treatment and pickling treatment.The welding of stainless steel pipe is usually composed of backing welding, filling welding and cover welding. Backing welding of stainless steel pipe is a key link in stainless steel pipe welding, which is not only related to the quality of engineeringSantiago-de-Cuba,Flux coated welding wire is used for backing welding, and argon gas is not used inside the weld. The welder's operation is simple and fastStainless steel seamless steel pipe for fluid transportation (instead of gbt- instead of gbt- instead of gb-)Ferritic and martensitic stainless steels are represented by series numbers. Ferritic stainless steel is marked with and , martensitic stainless steel is marked with and C, dual phase (austenite ferrite).

    21An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  19. HavanaStainless steel medical tubeThick and thin hair
    good wear resistance and poor corrosion resistance.Bidirectional Product Description: the tensile strength of the material is ~ mpa

    Model & mdash; Martensite (high strength chromium steel), and the high working temperature can reach ℃.Havana,  — The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.It has the characteristics of high efficiency and low cost. At the same time it can also well ensure the welding quality (in the capacity expansion and reconstruction project of Urumqi petrochemical, we use this method to weld joints and repair joints, with a one-time qualified rate of welding), which is worthy of our use.Ulan Bator,Application field: launch the market plan of stainless steel pipe in the target market of new products,Havana316L stainless steel strap, such as stainless steel kitchen equipment.When improved, it is possible to use it in refrigeration related engineering. Recently, suslx (cr Ti, Nb LC) and susl have been applied to frozen shells. Ferritic stainless steel has body centered cubic structure. When the material properties become weaker, sharp cracks will expand rapidly and cause brittleness. Austenitic series stainless steel will not produce brittleness because it has face centered cubic structure. Austrian stainless steel SUSL (cr-ni LC) and SUSL (cr-ni-mo-lc) shows that it still has superior impact characteristics at low temperature. However, and the tendency of embrittlement due to sensitized carbide or & sigma; equal heterogeneous precipitation.In many construction sites, we use this kind of welding for priming, which can effectively ensure its quality and has certain construction difficulties. Therefore, in which ferrite accounts for % - %. This dual phase structure is not easy to produce intergranular corrosion.Carbon structure delivery status: delivered in heat treatment (annealing, normalizing, tempering after normalizing, high temperature tempering).Body austenitic stainless steel seamless steel pipe and welded steel pipe stainless steel pipe for mechanical structure stainless steel pipe for ordinary pipe stainless steel pipe for boiler, stainless steel pipe for heat exchanger and seamless steel pipe for chemical industry (crnit) qhyad crnimosi duplex stainless steel seamless steel pipe. Stainless steel is mainly used in the automobile industry, accounting for more than % of the total consumption of automobile stainless steel and % is ferritic stainless steel. The exhaust gas produced by automobile engine is from the rear of intake pipe, front pipe, hose, converter and center pipe. The common steel grades of exhaust system are L, l, etc. it is mainly used in automobiles Stainless steel welded pipe. It is estimated that the stainless steel pipe used in automobile accounts for about % of the consumption of stainless steel pipe in the whole downstream. L stainless steel pipe, s stainless steel pipe and L stainless steel pipe are provided for a long time. The products are complete, excellent quality and favorable price. The use ratio of stainless steel pipe and welded pipe is about :.Installation requirements,The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, which has strict requirements on the chemical composition and temperature of molten steel; In order to prevent secondary oxidation of molten steel, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, tundish, nozzle and submerged nozzle.Austenitic stainless steel has good resistance to uniform corrosion, but there are still the following problems in local corrosion resistance: intergranular corrosion of austenitic stainless steel. Austenitic stainless steel will have intergranular corrosion when it is kept warm at ~ ℃ or cooled slowly. The higher the carbon content, the greater the tendency of intergranular corrosion. In addition, intergranular corrosion also occurs in the heat affected zone of the weldment. This is due to the precipitation of Cr rich CrC on the grain boundary. The chromium poor area is formed in the surrounding matrix, which is caused by corrosion of the primary cell. This intergranular corrosion phenomenon also exists in the ferritic stainless steel mentioned above.Low temperature embrittlement of stainless steel pipe --- in low temperature environment, the deformation energy is small. In low temperature environment, the phenomenon of reduced elongation and area shrinkage is called low temperature embrittlement. It is mostly produced on the body centered cubic structure of ferrite series.


    HavanaStainless steel medical tubeThick and thin hair



    Several kinds of stainless steel backing welding used for stainless steel backing welding usually adopt TIG process. According to the actual situation of the site, professional L stainless steel pipe, s stainless steel pipe L stainless steel pipe and other special products, old brands, with advantages in price and guaranteed quality. We can use the following four kinds of backing welding.Latest quotation,Assembly: the sealing ring shall be correctly installed in the U-groove of the pipe fitting, put the pipe into the socket of the pipe fitting and wait for crimping.The thickness of cold rolled steel strip is ultra-thin, and the thickness of hot rolled steel strip is large.Austenitic stainless steel austenitic stainless steel is developed to overcome the lack of corrosion resistance and brittleness of martensitic stainless steel. The basic composition is crl% and Ni%, which is referred to as - steel for short. Its characteristic is that the carbon content is less than .%, and the single-phase austenite structure is obtained by the combination of Cr and Ni.Havana,There are three main reasons for oxidation of stainless steel: production process, which is one of the reasons for oxidation of steel products. In terms of production process and product characteristics,HavanaStainless steel corrugated gas pipe,HavanaPrice of stainless steel strip, forming a thin oxide film on the product surface is the basic process to avoid oxidation, and it is also one of the main characteristics of steel products different from other steel products. It is specialized in products, renewable resources business and business package Including: stainless steel plate, stainless steel belt and stainless steel pipe. However, when the oxide film is incomplete and discontinuous due to insufficient or negligent production process, the oxygen in the air will directly react with some elements in the product, f stainless steel, a stainless steel and A-F duplex stainless steel according to the microstructure of steel in normalized state.Production process of stainless steel pipe A. preparation of round steel; b. Heating; c. Hot rolling perforation; d. Cutting head; e. Pickling; f. Grinding; g.; h. Cold rolling; i. Degreasing; j. Solution heat treatment; k. Straightening; l. Pipe cutting; m. Pickling; n. Finished product inspection.

    22An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites
  20. Consolacion-del-SurStainless steel sidebandMain parameters of working principle

    The back is not protected by argon, and the flux cored wire + TIG process has been applied in China for several years. Flux cored wires such as et-elt-et-elt-t-et-elt- have been produced and applied to field welding, and good economic benefits have been obtained.Model & mdash; Martensite (high strength chromium steel), good wear resistance and poor corrosion resistance.Consolacion-del-Sur,◆ stainless steel and alloy tool steel (C content is expressed in thousandths) such as thousandth of CrNi (i.e., such as CrNi stainless C & LE); .%, ultra low carbon C & le; .% if the international stainless steel mark, the American Iron and Steel Institute uses three digits to mark various standard grades of malleable stainless steel. Among them, austenitic stainless steel is indicated by numbers of and series, and ferritic and martensitic stainless steel is indicated by numbers of series. For example, some common austenitic stainless steels are marked with , , and , martensitic stainless steels are marked with and C, duplex (austenitic ferrite), stainless steels, precipitation hardening stainless steels and high alloys with iron content less than % are usually named by patent name or trademark.Stainless steel pipe, which was consumed and used at the end of the s, is a rebirth group emerging in today's pipe range. It has been widely used in the construction of water supply and direct drinking water pipelines. Stainless steel pipe is durable and has been recognized by the engineering community, and relevant parties are starting from reducing wall thickness and money, so as to facilitate further implementation. In order to promote stainless steel pipe, since the s, China has started to reduce wall thickness and cost; High diameter to wall ratio and high precision & rdquo; The technical effect of stainless steel pipe makes the stainless steel pipe lose its application and expand quickly. There are various connection modes of stainless steel pipes. The rare types of pipe fittings include contraction type, compression type, union type, push type push thread type, socket welding type, union flange connection, welding type and derivative series connection mode combining welding with traditional connection. These connection methods have different application ranges according to their principles, but most of them are convenient, firm and reliable. The sealing ring or gasket materials used for connection are mostly silicone rubber, nitrile rubber and EPDM that meet the requirements of national specifications, which eliminates the worries of users. In the construction of water supply pipe system, stainless steel pipe system is undoubtedly one of the best. At present but they are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. In direct drinking water all kinds of new plastic pipes and composite pipes have been lost and developed rapidly, hotels and public places at the international level have been equipped or are equipped with direct drinking water pipelines. In many cases, stainless steel pipe has more advantages, especially the stainless steel pipe with wall thickness of only . ~ mm has the characteristics of safety, reliability, sanitation, environmental protection, economy and applicability in high-quality drinking water system, hot water system and water supply system that puts safety and sanitation first. It has been proved by engineering theories at home and abroad that it is not only one of the new, but also a very competitive water supply pipe,Model & mdash; Except that the risk of weld corrosion of the material is reduced due to the addition of titanium, other properties are similar. Stainless steel decorative pipe, stainless steel pipe, series stainless steel pipe & mdash; Ferritic and martensitic stainless steel model & mdash; Good heat resistance, weak corrosion resistance, % Cr, % Ni.With the implementation of China's reform and opening up, the national economy has achieved rapid growth, and a large number of urban houses, public buildings and tourism facilities have been built, which puts forward new requirements for hot water supply and domestic water supply. In particular, people pay more and more attention to the problem of water quality, and the requirements are also increasing. Galvanized steel pipe, a common pipe, will gradually withdraw from the historical stage under the influence of relevant countries because of its corrosivity. Plastic pipe, composite pipe and copper pipe have become common pipes in the pipeline system. However, under certain circumstances, stainless steel pipe has more advantages, especially the stainless steel pipe with wall thickness of only . ~ mm. In high-quality drinking water system, hot water system and water supply system that puts safety and sanitation first, it has the characteristics of safety, reliability, sanitation, environmental protection, energy-saving and environmental protection pipes with good comprehensive performance of water supply system. It is also a very competitive water supply pipe, which will play an incomparable role in improving water quality and people's living standards.Austenitic stainless steel is generally used for manufacturing and manufacturing chemical equipment components,Consolacion-del-SurStainless steel pipe agent, low-temperature equipment components in refrigeration industry, and can be used as stainless steel spring and clock spring after deformation strengthening.


    Consolacion-del-SurStainless steel sidebandMain parameters of working principle



    The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, which has strict requirements on the chemical composition and temperature of molten steel; In order to prevent secondary oxidation of molten steel, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, tundish, nozzle and submerged nozzle.(V) the profitability of the steel plant has declined month by month. In the first half of , the metallurgical industry realized a profit of . billion yuan, a year-on-year increase of %, of which the ferrous metal smelting and rolling processing industry realized a profit of . billion yuan,Consolacion-del-SurStainless steel 316 seamless pipe, a year-on-year increase of %. From January to may, the profitability of key large and medium-sized iron and steel enterprises was far lower than the overall level of the industry, and showed a downward trend month by month. Although the profit increased by %,Consolacion-del-Sur316 stainless steel pipe, it was only . billion yuan with a profit margin of .%. In May, key large and medium-sized iron and steel enterprises realized a profit of only million yuan, falling month on month for five consecutive months, of which suffered losses, with a loss surface of %.There are mechanical, chemical and electrochemical methods to remove the scale of stainless steel pipe. Due to the complexity of the composition of the scale of stainless steel pipe, it is not easy to remove the scale on the surface and make the surface highly clear and flat. Generally, the removal of the scale of stainless steel pipe should be carried out in two steps, the first step is pretreatment and the second step is ash removal.Service first,AUSTENITIC FERRITIC duplex stainless steel. It has the advantages of both austenitic and ferritic stainless steel, but poor plasticity and weldability.Section shape stainless steel pipe can be divided into round pipe and special-shaped pipe according to the section shape. Special shaped tubes include rectangular tubes, rhombic tubes, elliptical tubes, hexagonal tubes, octagonal tubes and various cross-section asymmetric tubes. Special shaped pipe is widely used in various structural parts, tools and mechanical parts. Compared with circular pipe, special-shaped pipe generally has large moment of inertia and section modulus, and has large bending and torsion resistance, which can greatly reduce the structural weight and save steel.The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.


    Consolacion-del-SurStainless steel sidebandMain parameters of working principle



    The main way to prevent stress corrosion of austenitic stainless steel is to add SI ~ % and keep the content of N below .% from smelting. In addition, the content of impurities such as P, Sb, Bi and as should be reduced as much as possible. In addition, A-F dual phase steel can be selected, which does not correspond to stress corrosion in Cl - and oh - media. The initial micro crack will not continue to expand after encountering ferrite phase, and the ferrite content should be about % .Equipment maintenance,Stainless steel pipe is safe, hygienic, environmentally friendly, economical and applicable. The successful development of pipeline and new reliable simple and convenient connection makes it have more irreplaceable advantages of other pipes. It will be used more and more in engineering, and the use will be more and more popular. It has a good prospect.The folded stainless steel hot rolled strip is hot rolled into a strip with a thickness of mm-mm and a width of mm-mm.After fine tuning the molten steel temperature in the argon blowing station, it is lifted to the ladle rotary table for continuous casting.Consolacion-del-Sur,When using this process the following key points should be paid attention to: during the welding process, the correct included angle between the welding handle, welding wire and weldment should be maintained. The ideal caster angle of the welding handle nozzle is & deg; & mdash; & deg;, and the included angle between the welding wire and the weldment surface is & deg; & mdash; & deg;; correct the molten pool temperature, change the included angle between the welding handle and weldment, change the welding speed, etc. to change the molten pool temperature, so as to ensure Beautiful weld formation (uniform width, no concave, convex and other defects) During operation, the current shall be slightly larger than that of solid core welding wire, and the welding handle shall be slightly adjusted to accelerate the separation of molten iron and molten flux coating, it shall be sent to places of molten pool and pressed inward slightly to ensure penetration and prevent concave; during welding, the welding wire shall be regularly sent and taken out, and the welding wire shall always be ensured Under the protection of argon to prevent the end of the welding wire from being oxidized and affect the welding quality; pay attention to the welding quality of the arc and arc stop, and the spot weld shall be polished to & deg; the slope shall be gentle, and pay attention to the defects such as arc pit and shrinkage hole during arc stop.Argon shall conform to the rules of national specifications, and argon with purity of % shall be selected. If the content of impurities is too high, the maintenance effect of argon will be weakened and the weld quality will be indirectly affected.Stainless steel and alloy tool steel (C content is expressed in thousandths), such as thousandth of CrNi (i.e. .% C), stainless C & le; .%, such as CRNI ultra low carbon C & le; .%, such as crnimo.

    22An hour ago byWeb pagegreat  |   broadcast  |   comment   | Favorites