There is a difference between submersible slurry pump and sewage pump. Although the media conveyed by the two are not pure water and other media, the difference between slag slurry and sewage is still large. Let&#;s take a look at the difference between the two.　　 Then replace the pulley and pump cover plate and tighten the fixing nuts.Kashmar,KashmarPipeline pump body,　　If it can be started and operated with lubricating water, self-lubricating bearings can be used at the support, or other types of bearings (such as polymer bearings) can be used according to the design or contract requirements.　　Be sure to choose a pump that is more suitable for use.Mataro,　　 if the removed gasket is seriously damaged, a new gasket shall be replaced. The removed parts shall be cleaned with kerosene before assembly.　　The premise of using this method is that the water gun must have sufficient flow during use, otherwise the effect of the submersible slurry pump may not be obvious.　　In addition, while the submersible slurry pump does not need to be fixed. It can directly invade into the liquid for operation.　　The treatment method is as follows: first, check the circuit voltage to reduce the speed of the water pump.　　Promote the continuous expansion of the sales network group.demand,　　Be sure to choose a pump that is more suitable for use.　　 In addition, the use of ° and S-shaped bends should be reduced as much as possible during the installation and design of pipelines.　　There are differences.

　When using the submersible slurry pump, the equipment may be burned out. The main reason for this phenomenon is improper operation. How should we prevent the burning out?Installation works,　　 The fixing method of the impeller is changed from screw thread to key clamp to prevent the impeller from falling off and causing damage!　　 The casing ground wire of the electric pump shall be connected in strict accordance with relevant regulations. When the electric pump is running, it is strictly prohibited to work or move in the water of nearby devices or people, in case of accidents caused by the power distribution of the electric pump.　　 The rotor assembly is designed according to the actual situation, and the operation is more stable!Kashmar,　　In fact, the impeller clearance of submersible slurry pump is not adjustable for all types of pump, but it is adjustable. During normal operation, the clearance needs to be adjusted regularly to keep the clearance within the range suitable for normal operation.　　The development of submersible slurry pump is to adapt to increasingly complex working conditions,KashmarZD slurry pump,KashmarVertical multistage centrifugal pipeline pump, and its use mode is more flexible. And it fills a part of the gap in the application of slurry pump. When the submergence depth is deep and there is no better slurry outlet, that is in the traditional slurry pump　　In recent years, submersible slurry pumps have replaced vertical slurry pumps. What are the differences between the two? Let&#;s yze.

the demand for submersible slurry pumps has increased greatly. In many fields