easy careAs the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance, impact resistance, fire resistance, flame retardancy and chemical pollution resistance, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty, wipe it with a cloth stained with detergent.Camenca,If it is really serious or the actual recovery is not satisfactory, we must remove and replace the floor, find technicians to solve it, take out the seriously damaged wooden floor and remove it. Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard.Baherden, Select machining accuracyIn today&#;s building materials industry, there are many incidents of profiteering and even damaging the interests of consumers. The bad atmosphere has led to the reduction of consumer trust.The price is in a state of confusion, and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price. Various surface treatments (concave convex pattern, hand grip pattern, pair pattern, mirror pattern)

Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging. Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser.Physical and mental health floor is the floor produced according to the production and manufacturing product quality standards and installation and application testing standards (double specifications) which is not easy to cause harmful substances and ensure the health and safety of residential gas.quality index,Physical and mental health floor is the floor produced according to the production and manufacturing product quality standards and installation and application testing standards (double specifications), which is not easy to cause harmful substances and ensure the health and safety of residential gas.If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, flattening the cracked part of the floor and repainting it.SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally,CamencaPark anticorrosive wood floor, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts,CamencaWaterproof practice of toilet floor, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, customers attach great importance to quality.Although the solid wood floor is good, all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.Equipment maintenance,Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the moisture and moisture outside the floor are not easy to invade and the formaldehyde inside is not easy to release,CamencaWhat are SPC flooring manufacturers, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area, it is inconvenient to leave expansion joints and compression strips, it can prevent floor arching and reduce floor contraction joints. The composite floor has stable quality and is not easy to be damaged.The cross-section of the floor is rubbed with a file to generate heat in the cross-section, and formaldehyde is fully volatilized (formaldehyde is accelerated at more than degrees, and you can smell the pungent smell at the same time). At this time you can smell,Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns generally you can smell three different levels of smellCamenca, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.Improve the sense of hierarchy, reliability and cost performance of the floor. Why don&#;t the community owners choose the solid wood floor? Select machining accuracy