HorovBeverwickProduct Information
release time:2024-05-18 11:07:19
regularly maintain and extend its service life

Remind customers that there are still many areas to pay attention to when maintaining and maintaining the lifting platform. We also hope that customers and friends can pay more attention when using it to ensure the safety of personnel and property, and create greater benefits for the enterprise. What is the matching degree of electric elevators? Everyone has always been confused. In short the matching degree of electric elevators is how the height of the electric elevator can be combined with the operating height. Electric elevators are not used frequently, We suggest considering purchasing a guide rail electric elevator or a scissor fork electric elevator. The scissor fork electric elevator can achieve a maximum load capacity of tons so we must make it clear based on the actual operating height and actual load capacity when using electric elevators. If the frequency is too high,HorovKaltanseta, which effectively solves the problem of load capacity. If the frequency of use is too high and the height is relatively high, we recommend using a guide rail electric elevator. This type of electric elevator is not easy to malfunction under high-frequency operation, By solving the load capacity and frequency of use,HorovSividnica, the operating failure rate can be reduced to a low level.Horov,Electric lifting machinery,HorovWolfsburg, as an important product of social development in China, has a high social status and has now become an irreplaceable operational tool in our mainstream goods. The hydraulic pump station is the heart position of electric lifting machinery, which greatly tests the professionalism and attention of operators. It is our common responsibility to inspect it and ensure the daily use of machinery. Let's take a look at a few common sense issues: the manufacturer of electric elevators is to ensure the correctness of the power connection, and there should be no misconnection or leakage; Pay attention to cleaning work in daily life and do not allow stains to corrode it; When standing still, regular maintenance should be carried out to prevent the impact of rain and snow weather; Overloading is the first thing that operators must comply with; Iron Law&# quo;; The adjustment of the solenoid valve cannot be done arbitrarily and must be checked and certified by a professional organization; Especially when conducting outdoor operations under high temperatures, it is necessary to always pay attention to the abnormalities of the pump station; It is very normal for us to encounter some problems when using hydraulic boarding bridges, as long as these problems are not very serious, we don't have to worry too much. However, when there is a problem with the hydraulic boarding bridge, only a timely solution is the correct response. Below is an introduction to some common faults of the hydraulic boarding bridge and specific solutions: the hydraulic boarding bridge must be repaired while hanging and supporting the working platform of the lifting platform to avoid sudden descent of the lifting platform, causing unnecessary casualties; . Do not adjust the overflow valve arbitrarily. Because every component in the hydraulic system operates at a specified pressure, once the relief valve is adjusted, it may cause abnormal operation of the hydraulic system, causing unnecessary damage to people, machines, and objects; Non professional personnel are not allowed to disassemble electrical appliances at will to prevent electric shock or incorrect connection.Small safe operation distance: Circuit voltage (kV) of external power lines<~~~ Small safe operation distance (m) Setting requirements: A small safe distance should be maintained between the outer edge of the construction electric elevator and the edge of the external overhead power line.Zhengzhou,Setting requirements: The verticality deviation of the installation of the guide rail frame of the construction electric elevator should comply with the requirements of the user manual and specifications, as specified in the above table.During the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, and record the inspection results.In addition to ground protective fences, low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between m and m. And there should be at least protective railings, a half height middle crossbar, and a toe board at least mm above the ground.


HorovBeverwickProduct Information



The quality of the standard section should comply with the product manual and specification requirements.Safety devices: Electric elevators for construction should be equipped with overload detection devices. When the load inside the cage exceeds % of the rated load capacity, the overload detection device will give a warning signal inside the cage,Before operating the construction electric elevator, routine inspections should be carried out according to regulations and inspection records should be filled out.Convenient and efficient, the landing door shall not be opened.The net height of the landing door opening should not be less than m, and the difference between the net width and the outlet width of the cage door should not exceed mm. When the floor door is closed, except for the gap between the lower part of the door that should not exceed mm, the size of any through-hole and opening related to the distance between any door and adjacent moving parts, as well as the gap around the door or between parts, should comply with the provisions of Table of 'Mechanical Safety - Safety Distance to Prevent Upper and Lower Limbs from Touching Dangerous Areas' GB-.There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least . meters.


HorovBeverwickProduct Information



The use of standard section connecting bolts should comply with the user manual and specification requirements.Range,When the distance between the outer edge of the construction electric elevator and the edge line of the external overhead power line cannot meet the requirements in the table above, effective protective measures should be taken.Construction electric elevators should be equipped with safety devices to prevent the cage from falling. The anti fall safety device should be functional at all times, including installation, disassembly, and before resetting after action. Fall arrest safety gearDrainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).Horov,The landing door should be in a normally closed state. Without the permission of the construction electric elevator driver, the landing door shall not be opened.Protective measures should comply with regulatory requirements.Setting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.


comment list
  • Alloy casting

    The stuff is really good, but HorovBeverwick the price is a bit more expensive, but it is still worth the money. This is the first time I bought it, thanks to your shopping guide.

  • Ao An Plastic Products Co., Ltd.

    A good seller, even a novice, a lot of HorovBeverwick don’t understand. Fortunately, the seller has patient guidance on the other end of the computer, and I have a sense of accomplishment, and finally

  • Stationery

    The logistics of HorovBeverwick is a bit slow. Overall it's good, I hope I have a chance to cooperate next time

  • grid power company

    Cooperation with you is really good, HorovBeverwick good quality, come to our company again if you have time.

  • Air Ocean Wire Mesh Manufacturing Co., Ltd.

    Just paid, when will HorovBeverwick arrive, boss.

  • Office Equipment and Consumables

    Really a good seller. I have to find you if I have this HorovBeverwick demand in the future!

©2009-2024Industrial Microblog  Sitemap