The problem is that the power indicator light is on, but there is&quo; in the electrical box when the up button is pressed; Clacking sound&rdquo, Does the platform not rise or can only rise to a limited height?. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the aluminum alloy elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing and fastening screws for aluminum alloy elevators, it is necessary to use the correct diagonal first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the aluminum alloy elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the maintenance of the aluminum alloy elevator is completed, the equipment maintenance record must be filled out. The maintenance record should include the equipment maintenance date, the personnel participating in the maintenance, the maintenance items, the brand model and specification of the replaced parts, the effectiveness of the maintenance, and whether the equipment still has problems after the maintenance is completed.Tanovsky kegur,Single column aluminum alloy elevator: This series of products is indoor and widely applicable to the elevator tables in various industries such as star hotels and large supermarkets. It has balanced lifting and easy operation, and can enter and exit the elevator at will, with low power consumption, no pollution, and no damage to the ground during work. It can be used for double column aluminum alloy elevators to stick to walls and explore operations, without any dead corners during work. The single column aluminum alloy electric elevator equipped with gantry cross frame accessories, is very suitable for maintenance work in cinemas, auditoriums, etc. The gantry frame is easy to assemble, labor-saving to operate, flexible to move, and can operate stably on steps. Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.Ytrebygda,Regularly check the connection of each part and tighten it if there is any looseness. The tightness of the body connecting bolts should be checked when the body is under pressure (the rotating arm can be used to cause compression), and all connecting shafts must have split pins and be sufficient. Professional itemsIt is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas of the aluminum alloy elevator engine contains carbon monoxide. This is a toxic gas that has been in low concentration for a long timeNext, let's talk about the maintenance and upkeep of mechanical equipment for aluminum alloy elevators: the brakes of each mechanism should be regularly inspected and adjusted to ensure flexibility and reliability.

Six mast aluminum alloy elevator: adopts a + lifting structure, and the main structure is made of high-quality high-strength aluminum profiles, with high strength heavy load, good stability, flexible operation, large platform area, and convenient implementation. It is suitable for - people to climb high at the same time.Aluminum alloy elevators are small in size, light in weight, and easy to move. They can be used for both infrared and flashlight operations, making them particularly suitable for maintaining electrical equipment in hotels, commercial buildings, airports, stations, and scientific research institutions. They are clean and hygienic.Method for hydraulic oil leakage in aluminum alloy elevator: Check if the pipe joints are loose and try to tighten them. Check if the viscosity of the hydraulic oil used is too low. When checking the leakage point of the hydraulic oil system, generally, the place where hydraulic oil seeps out is the leakage point, but it is not ruled out that the leaked hydraulic oil may accumulate along the pipeline deviating from the leakage point. Therefore,Tanovsky kegurAluminum alloy mast type elevator, it is important to carefully search during inspection. High priced aluminum alloy elevator manufacturers of various specifications welcome scrap merchants, industrial companies, enterprises,The hydraulic aluminum alloy elevator is widely used in various industrial enterprises and production lines such as automobile, container, mold manufacturing, wood processing, chemical filling, etc., to meet the lifting requirements of different operation heights. At the same time, it can be equipped with various table forms (such as ball, roller, turntable, turning, tipping, telescoping), and with various ways (transfer, linkage, explosion-proof), it has stable and accurate lifting, frequent starting The characteristics of large load capacity effectively solve various lifting and lowering difficulties in industrial enterprises making production operations smooth. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure ensures high stability of the aluminum alloy elevator, with a wide working platform and high bearing capacity, making the high-altitude work range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.The hydraulic aluminum alloy elevator is widely used in various industrial enterprises and production lines such as automobile, container, mold manufacturing, etc., it can be equipped with various table forms (such as ball, roller, turntable, turning, tipping, telescoping), and with various ways (transfer, linkage, explosion-proof), it has stable and accurate lifting, frequent starting The characteristics of large load capacity effectively solve various lifting and lowering difficulties in industrial enterprises, making production operations smooth. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure ensures high stability of the aluminum alloy elevator, with a wide working platform and high bearing capacity, making the high-altitude work range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.Is the power source noise abnormal during the lifting process of the aluminum alloy elevator?

With the continuous increase of our productivity and the continuous improvement of our lives, the demand for aluminum alloy elevators is also increasing. The application of aluminum alloy elevators in every corner of our lives will bring us objective benefits.Quality department,Regularly check all wires and cables for damage. Timely bandage and replace damaged parts.Customizable according to the actual situation of the customer.The aluminum alloy elevator with strong controllable performance is easy to operate and has high accuracy,Tanovsky kegurAluminum alloy high-altitude elevator, which can meet the different needs of different heights that is, press and stop, making high-altitude operations simple and feasible.Tanovsky kegur,Strictly follow the operating instructions of the aluminum alloy elevator for safe use, and strictly prohibit illegal operations.Each box, distribution box, etc. should be kept clean regularly and dust on electrical equipment should be promptly cleaned.Advantages: Due to the wide selection of electronic control switches, the aluminum alloy elevator with remote operation system can be operated remotely even on harsh construction sites, improving the comfort of operation and convenient walking. On the basis of traditional aluminum alloy elevators,Tanovsky kegurAluminum alloy lifting herringbone ladder, steel bar transportation devices and concrete transportation devices are installed, which can transport steel bars, concrete, and workers, greatly improving construction efficiency; The optional advanced stepless frequency control system enables the elevator to achieve stepless speed regulation of -m/min.