Anti-corrosion measures for the body of aerial work vehicles Pay attention to small scratches. The paint surface of aerial work vehicles is often corroded. In addition to common collisions, scratches, small rocks on the driving tires, there may also be a peeling paint spot, and a small rust will appear after a long time. Because most of these scars are small, they are easy to ignore. Therefore, check regularly, the engine compartment cover and its surroundings, and once found,TarantoTwo layers of hydraulic lifting cargo elevator, go to a professional beauty shop for processing.Safety performance: The lifting structure is made of high-strength manganese steel rectangular tube, and the scissor-type mechanical mechanism is easy to maintain, with strong stability and high carrying capacity. The maximum lifting height is about meters, and the maximum load is about tons. .Taranto,Beginners operating mobile lifts should pay attention to which equipment wears quickly: due to the processing and installation of mobile lifts and other aerial work platform equipment components, the surface of the equipment is rough, the area is small, and the load is uneven, causing equipment wear. During the operation of aerial work platform equipment such as mobile lifts, the concave and convex parts on the surface of the parts fit and rub against each other, and the metal debris and the equipment undergo secondary friction, which will accelerate the wear of the surface of the equipment parts. Therefore, during the break-in period of mobile lifts and other aerial work platform equipment, it is easy to cause wear of parts and components, and the wear speed is fast.Brake operators of various mechanisms on the equipment should regularly check and adjust the gap between the brake shoe and the brake wheel to ensure flexibility and reliability. Long-term promotion of freight elevator factory, old brand,Conscientiously write the special construction plan for installation and construction quality guaranteed!Tougan, and make safety technical disclosures to the installers.The load of this series of products is divided into . to . tons, and can also be customized according to user requirements, with a load of up to tons.Unscrew the screw on the dust-proof hole outside the flange of the elevator, adjust the PCS system ring to align the side hole with the dust-proof hole and tighten the inner hexagon. After that, remove the motor shaft key.

Regular maintenance Regularly check whether the circuit system of the hydraulic lifting platform is loose, and check whether the wires and cables are aging and damaged, which may cause leakage of the line. If there is, it should be repaired in time to avoid electric shock.Integrity of the overall structure Check whether the overall structure is deformed and whether important parts are damaged, especially the load-bearing poles and chains.The surface of the brushes of each part should be kept clean, and the pressure of the brushes should be adjusted so that the area is not less than %. Professional elevator factory, large quantity favorably, high quality and low price. Fire-resistant-waterproof-high temperature resistant durable,Before using the aerial work platform, it is necessary to confirm whether the outriggers are well supported, refer to the level beads on the equipment to judge and debug, and then proceed with the operation; the rollers and slideways confirm whether the roller slideways of the hydraulic lifting platform are dry, and if there is When drying the site, an appropriate amount of butter should be added to ensure the smoothness during operation and to avoid head-to-head wear between mechanical parts.Check the limit switch to see if all the limit switches are loose. If so, please tighten them. Pay special attention to the ultra-high protection stroke of the hydraulic lifting platform to avoid accidents caused by the equipment exceeding the high safety height; check the pins (ear pins and center pins) Check whether the nuts, nuts, screws, etc. are loose, if any, should be reinforced immediately; ensure that the hydraulic lifting platform rises and falls smoothly; outriggers (for high-altitude operating platform)Frequently check the humidity of the aerial work vehicle that is prone to water accumulation. It is inevitable that the aerial work vehicle is driving in rainy and snowy weather, or on muddy roads. The bottom and some gaps and indoor floors are easy to accumulate sludge. If the owner does not clean it in time, this will hide the moisture. Therefore, the outer edge of the wheel hub, the door, the corner of the bottom of the trunk, the key hole and the wiper frame and other areas should be checked regularly, and the drainage holes in the door and various parts should be kept unblocked to ensure that the car seat covers, some small problems will inevitably appear after a long period of time. At this time, what we should do is to maintain and maintain the elevator. How to follow the steps correctly It has become a difficult problem, and I will answer it with you.new product,The hydraulic lifting platform is widely used in the maintenance of industrial and mining enterprises, municipal construction and decoration of hotels and hotels, with reliable quality and perfect performance.Guide rail hydraulic freight elevator is a kind of hydraulic lifting mechanical equipment. It is used for the transportation of goods between the floors of industrial plants with more than one floor restaurants and hotels. The low height is suitable for a variety of working conditions, no upper lifting point is required, and the structure is diversified (single-column, double-column, the operation is simple, and the goods are transported up and down stably.The motor connection is wrong. When the delta connection motor is wrongly connected into a star shape, the motor still runs with full load,TarantoCar lift cargo elevator, and the current flowing through the stator winding will exceed the rated current, and even cause the motor to stop by itself. If it overheats, it will burn out. When the star-connected motor is wrongly connected into a triangle, or the motor with several coil groups connected in series to form a branch circuit is connected in parallel with two branches, and in severe cases, the winding will be burned.Taranto,The cleanliness of the hydraulic station is an important aspect of the elevator hydraulic station, so it should not be careless. Moreover, from a professional point of view, and you should refer to the specification manual, so that you can have a correct understanding and know how to achieve better cleanliness.Many people think that the strength of the elevator itself is relatively high when using the elevator, so they did not strictly follow the installation method in the manual during the installation process, but they do not know that this will cause increased wear and tear of the parts and inflexible operation, and pay attention to the work The installation precautions corresponding to the environment should not be ignored. Correct installation, use and maintenance of elevators are an important part of ensuring the normal operation of mechanical equipment. Therefore, when you install the elevator, please be sure to strictly follow the installation and use related matters below, and assemble and use it carefully.Guide rail lift (also known as freight elevator) is a non-scissor hydraulic lifting platform, which is mainly used in industrial plants, restaurants, restaurants, warehouses, docks, workshops and other places that need to move goods vertically between high-rise buildings above the second floor. The low height is especially suitable for sites where the site is not suitable for digging pits. What problems do we need to pay attention to in these places where elevators are used?