The submersible slurry pump needs to be inspected after reassembly. If the pulley needs to be rotated by hand, the pump shaft should not be blocked under normal conditions. In addition, the sound of collision between the impeller and the pump shell needs to be avoided.　　 During the installation of smooth bearing components if the installation is correct, the smooth oil is appropriate, and the delivery life will be long, the repair personnel should regularly repair the bearing components, check the condition of the bearings and the smooth oil,IlamSubmersible non clogging slurry pump, and regularly add or replace the smooth oil during the work, and the interval and writeIlam, there are some common obstacles there are many cases of sudden abnormal failures of submersible pumps. Among them, such as the submersible pump cannot be started after it is powered on, or the motor speed cannot be started after the submersible pump is started. A very small wait　　 The bus voltage where the motor is located is V. Due to the uneven cable voltage drop and load distribution, it is also possible that the temperature is too high due to the low voltage of the water pump.Tembisa,　　Normal operation. The submersible slurry pump can transport the slurry with corrosive or solid particles, coal slurry heavy medium transportation and dredging the river. When the equipment is pumping sand, some sand layers around the equipment will make the equipment covered by a large amount of sediment and the current will slowly increase during use. Well, we should choose　　Carbon, building materials, chemical industry and other industrial industries are mainly used to transport abrasive pastes containing solid particles.　　Submersible pump is a common water lifting equipment for deep wells. During operation, the whole machine intrudes into the water to extract water from the underground to the surface. It is commonly used for domestic water, mine rescue, industrial cooling, seawater lifting, ship load adjustment, etc. Submersible pump is generally divided into clean water submersible

　　In this way, a smooth surface can be formed on the surface.　　WQ fixed type is convenient for maintenance. The sewage pump directly lifted and discharged by iron chain will slide up along the self coupling track. It is mainly used for septic tank or domestic sewage tank, which can avoid going down to the dirty sewage tank for maintenance; QW mobile type generally needs to discharge the sewage from the sewage tank before taking it up. If it is midway　　Flexibility. The equipment has advanced structure,IlamBooster pipeline pump, wide flow passage, strong sewage discharge capacity, excellent material selection and strong corrosion resistance. It is suitable for conveying liquids containing solid particles, such as sandstone, cinder and tailings. So what are the requirements for its work? Let&#;s understand briefly.Design brand,　　Cavitation of the pump is caused by water evaporation of the pump. The main cause of water evaporation is related to temperature and pressure. Under a certain pressure, when the temperature rises to a certain value,IlamSelf priming slurry pump wholesale, the water begins to vaporize and change from liquid to gas. On the contrary, at a certain temperature, the pressure drops to　　The high-efficiency slurry pump has three characteristics: first, the slurry pump has high operation efficiency and low loss.　　In fact, when the submersible slurry pump is blocked during use, it will not only have a certain impact on the working efficiency of the equipment during operation, but also cause serious damage to the equipment itself, so it is also a reminder that we are using it too

　　 the water pipe shall be provided with a gate valve to regulate the pump working point. The valve shall be installed as close to the pump outlet as possible. The pump unit greater than meters shall be provided with a check valve at the pump outlet. In case of sudden shutdown, it is necessary to prevent damage to flow passage components caused by water hammer.Work courses,　　 for screws that are too tight or rusted for a long time, the nut can be lubricated with kerosene prepared in advance, or the nut can be gently knocked with a wooden hammer and then removed. This method can also be used in slurry pumps and other places.　　 there are two different installation methods, fixed automatic coupling installation system and mobile free installation system.　　Some of them are OK. For irrigation and other purposes, in fact, we choose to use larger flow. Let&#;s take a look at the method of selecting pumps.Ilam,　　Extend service life. In fact, the submersible slurry pump is widely used in many lives and there is a very important component water seal in the pump, which can separate the pump body from the motor, so it mainly plays a role in use　　What should be paid attention to in the process? Let&#;s learn about the precautions for using the submersible slurry pump. When the equipment is in use, the pump itself generally needs to be placed on land for use, but its suction pipe needs to be placed in water　　The first stage impeller of the pump is disassembled; It is also necessary to screw down the connecting nut between the water absorption section and the bearing body and the bolt on the bearing pressure connection, so that it is convenient for us to disassemble the bearing parts; When the shaft is pulled out from the suction section, the fixing nut on the shaft shall be