Secondly, there must be no dirt on the friction surface. If there is dirt, it needs to be washed off with gasoline or thinner; the gear box, gearbox, external gear and other parts of the equipment and the hydraulic oil must be in accordance with the requirements in the table; Correctly maintain the hydraulic guide rail lift. Regularly check whether the wire ropes in each part are broken or loose. If this phenomenon is found, replace them in time. If there is any looseness, it should be tightened in time. The connecting bolts of the equipment should be checked for tightness when the body is under pressure. All connecting shafts should be equipped with cotter pins; check whether each mechanism is operating normally, whether there is noise or failure , to eliminate all faults in a timely manner; when installing, dismantling and adjusting the slewing mechanism of the equipment, it is necessary to pay attention to the parallelism between the reducer and the center line of the gear, and the appropriate meshing gap; conduct a comprehensive inspection of the equipment regularly, whether the wires and cables are If there is damage, whether the motor is overheated, replace it in time and continue to run after troubleshooting; ensure that the bearings of the motor, each box, distribution box and brushes must be kept clean, and the travel switch points of each safety device must be safe and reliable.Outriggers: mechanical outriggers, hydraulic outriggers, ordinary hand-operated outriggers, pull-out outriggers.Villeban,The main categories of aluminum alloy lifts in the Chinese market are based on the structure of the aluminum alloy lifts. The load is generally below kg, especially suitable for one-person operation.Use Hydraulic lifts are widely used in various industrial enterprises and production lines such as automobiles, containers, mold manufacturing, wood processing, chemical filling, etc., to meet the lifting needs of different operating heights and can be equipped with various table forms (such as balls, rollers, Turntable, steering, tilting, telescopic),VillebanFloor lift cargo elevator, with various methods (separate, linkage, explosion-proof), with the characteristics of stable and accurate lifting, frequent starting, large load capacity, etc., effectively solving the difficulties of various lifting operations in industrial enterprises so that Production operations freely. The professional elevator factory has advanced technology, more affordable prices, and more discounts are in progress, welcome to consult.San-Vicente,Regular maintenance Regularly check whether the circuit system of the hydraulic lifting platform is loose, and check whether the wires and cables are aging and damaged, which may cause leakage of the line. If there is, it should be repaired in time to avoid electric shock.Always check the connections of the various parts of the hydraulic lift and tighten them if they are loose. The tightness of the connecting bolts of the body should be checked when the body is under pressure.Guide rail lift (also known as freight elevator) is a non-scissor hydraulic lifting platform, which is mainly used in industrial plants, restaurants, restaurants, warehouses, docks, workshops and other places that need to move goods vertically between high-rise buildings above the second floor. The low height is especially suitable for sites where the site is not suitable for digging pits. What problems do we need to pay attention to in these places where elevators are used?

Precautions for elevator installation Keep the access road of the external construction elevator smooth and have enough parking space for equipment. When it is necessary to use a steam crane for auxiliary installation, it should be fully considered whether the site environment meets the operating conditions of the steam crane.Since , China Mobile's elevator industry has developed rapidly, which has played a positive role in promoting social development. Over the years, mobile lift equipment has been used as equipment for manned high-altitude operations, and there are many manufacturers. There is a lack of corresponding industry standards and industry norms, production conditions, and product quality of various manufacturers in the market are different, and safety accidents when working at heights occur from time to time. The formulation of this standard establishes uniform regulations for the design, production and use of manufacturers in the market to ensure operational safety and prevent personal injury and death accidents, and plays an important role in guiding the design, manufacture and market use of various products.It is strictly forbidden for personnel to take the freight elevator to go up and down floors and climb.Administration,The contact opening and closing of the travel switch of each safety device must be reliable, and the contact arc crater should be polished in time.If the motor of the hydraulic lift is overheated, stop the machine in time and continue running after troubleshooting. The motor bearings must be in good condition.Correct construction elevator site inspection First of all, we need to check the foundation to see if there is any water accumulation, and check whether the grounding system meets the requirements. We also need to check how the structural bolts of the frame are fastened and whether there are any cracks in the welds. We need to follow the instructions to set it up. In mechanical transmission, it can be divided into two types: open type and closed type. Of course, the lift also has a lot of safety equipment.

What kind of function can be achieved by installing the elevator? Before installation confirm whether the motor and the elevator are intact, and strictly check whether the dimensions of the parts connected to the motor and the elevator match. Here are the dimensions of the positioning boss of the motor, the input shaft and the groove of the elevator. Fitting tolerances.High quality and low price,Are the water cooling and air cooling of the hydraulic station the same?Attention should be paid to checking whether there are any broken wires and loose strands in the wire ropes of each part. If it exceeds the relevant regulations, it must be replaced immediately. The care and maintenance of wire ropes should be strictly in accordance with regulations.Many customers think that the operating power supply of the hydraulic lifting platform is below the safe voltage of V, and there will be no electric shock. They are wrong. Normally, there will be no electric shock, but if there is improper operation, it will still be very dangerous. So how can we effectively prevent the occurrence of electric shock accidents? Today, the editor will share safety knowledge with you.Villeban,Use Hydraulic lifts are widely used in various industrial enterprises and production lines such as automobiles, mold manufacturing, wood processing, chemical filling, etc., to meet the lifting needs of different operating heights, and can be equipped with various table forms (such as balls, rollers, steering, telescopic), linkage, explosion-proof), with the characteristics of stable and accurate lifting, frequent starting, large load capacity etc., effectively solving the difficulties of various lifting operations in industrial enterprises,VillebanProduction of simple lifting cargo elevators, so that Production operations freely. The professional elevator factory has advanced technology, strict testing, more affordable prices, and more discounts are in progress, welcome to consult.Always check the connections of the various parts of the hydraulic lift, and tighten them if they are loose. The tightness of the connecting bolts of the body should be checked when the body is under pressure.The hydraulic lifting platform can be divided into: four-wheel mobile type, two-wheel traction type, car modified type car type, auxiliary self-propelled type, and the lifting height ranges from a meter to s meter.