Meet the needs of architects and structural designers.When using this method it should be noted that the water-soluble paper should be double-layer and must be pasted well, otherwise it is easy to cause damage and fall off of the water-soluble paper, resulting in loss of argon protection of the inner weld and oxidation, resulting in cutting of the weld junction and re welding, which can not ensure the welding quality and seriously affect the construction period. Therefore, the water-soluble paper should be strictly checked and pasted before welding.Coatepeque,Cold drawn (rolled) seamless steel pipe: round billet → Heating → Perforation & rarr; Lead & rarr; Annealing & rarr; Pickling → Oiling (copper plating) → Multi pass cold drawing (cold rolling) → Blank tube & rarr; Heat treatment & rarr; Straightening & rarr; Hydrostatic test (flaw detection) → Mark & rarr; Warehousing.The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, which has strict requirements on the chemical composition and temperature of molten steel; In order to prevent secondary oxidation of molten steel, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, tundish, nozzle and submerged nozzle.Bissora,Indicates that the chemical composition is represented by international chemical element symbols and national symbols, and the composition content is represented by letters: for example, China and Russia use fixed digit numbers to represent steel series or numbers; For example, the United States,Coatepeque304 stainless steel decorative pipe, Japan, series series and series; The serial number is composed of Latin letters and order, which only indicates the purpose.Model & mdash; The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.The intergranular corrosion of austenitic stainless steel can be prevented by adding Ti, Nb and other elements that can form stable carbides (tic or NBC) and avoiding the precipitation of crc on the grain boundary.

Stainless steel pipe is durable and has been recognized by the engineering community, and relevant parties are starting from reducing the wall thickness and lowering the grid,Coatepeque40Cr precision steel pipe, so as to facilitate further development. In particular, the price of stainless steel pipe is not high, so the supporting connection, the reliability and price of pipe fittings are the main factors determining its development. Domestic developers have independently developed connection technology and pipe fittings in Sichuan, Guangdong, Zhejiang, Jiangsu and other places, especially in the environment containing chloride ions. Stress corrosion is a prominent problem that ordinary austenitic stainless steel is difficult to solve.Model & mdash; Commonly used precipitation hardening stainless steel model, usually also called -; %Cr,%Ni.system,Only soluble paper or the combination of soluble paper and blocking plate is used for blocking ventilation protection (i.e. solid core welding wire + TIG + water-soluble paper)When using this process, the following key points should be paid attention to: during the welding process, the correct included angle between the welding handle, welding wire and weldment should be maintained. The ideal caster angle of the welding handle nozzle is & deg; & mdash; & deg;, and the included angle between the welding wire and the weldment surface is & deg; & mdash; & deg;; correct the molten pool temperature, change the included angle between the welding handle and weldment, change the welding speed, etc. to change the molten pool temperature, so as to ensure Beautiful weld formation (uniform width, no concave, convex and other defects) During operation, the current shall be slightly larger than that of solid core welding wire, and the welding handle shall be slightly adjusted to accelerate the separation of molten iron and molten flux coating, so as to facilitate the observation of molten pool and penetration; when filling the welding wire, it shall be sent to places of molten pool and pressed inward slightly to ensure penetration and prevent concave; during welding, the welding wire shall be regularly sent and taken out, and the welding wire shall always be ensured Under the protection of argon to prevent the end of the welding wire from being oxidized and affect the welding quality; pay attention to the welding quality of the arc and arc stop, and the spot weld shall be polished to & deg; the slope shall be gentle, the strength of the steel is greatly improved, especially when rolling in the subzero temperature zone. The tensile strength can reach more than MPa. This is because in addition to the cold hardening effect, there are also superimposed Deformation induced M transition.

Editor's note on the causes of steel rusting: chloride ions exist widely, such as salt, sweat stains, seawater, sea breeze, soil, etc. stainless steel corrodes rapidly in the presence of chloride ions, even surpassing ordinary low-carbon steel. Chloride ions form complexes with Fe in alloy elements, reducing the positive potential of Fe, and then being stripped of electrons and oxidized [].property right,Stainless steel tube for boiler tube and heat exchanger (gjb- (yb-) aviation structural tube, thick wall seamless steel tube (gjb- (yb-) aviation stainless steel tube (ybt-) (yb-) aviation a blind rivet seamless steel tube (gjb- (yb-) aviation structural tube, seamless steel tube (ybt- (yb- aviation conduit A seamless steel pipe small diameter stainless steel pipe seamless steel pipe for high pressure boiler low and medium pressure boiler pipe stainless acid resistant extremely seamless steel pipe seamless steel pipe for petroleum cracking seamless steel boiler and heat exchanger Ferritic and austenitic alloy pipe general purpose austenitic stainless steel pipe and welded pipe austenitic stainless steel seamless steel pipe welded steel pipe welded steel pipe carbon steel, Ferritic and austenitic alloy steel pipe) General requirements General requirements for ferrous and alloy steels for special purposes General requirements for carbon　　SPHESPHE—& mdash; Hot rolled steel plate and strip for deep drawing.When using this process, the following key points should be paid attention to: during the welding process, the correct included angle between the welding handle, welding wire and weldment should be maintained. The ideal caster angle of the welding handle nozzle is & deg; & mdash; & deg;, and the included angle between the welding wire and the weldment surface is & deg; & mdash; & deg;; correct the molten pool temperature, change the welding speed, so as to ensure Beautiful weld formation (uniform width, no concave, convex and other defects) During operation, the current shall be slightly larger than that of solid core welding wire, and the welding handle shall be slightly adjusted to accelerate the separation of molten iron and molten flux coating, so as to facilitate the observation of molten pool and penetration; when filling the welding wire, it shall be sent to places of molten pool and pressed inward slightly to ensure penetration and prevent concave; during welding, the welding wire shall be regularly sent and taken out, and the welding wire shall always be ensured Under the protection of argon to prevent the end of the welding wire from being oxidized and affect the welding quality; pay attention to the welding quality of the arc and arc stop and the spot weld shall be polished to & deg; the slope shall be gentle, and pay attention to the defects such as arc pit and shrinkage hole during arc stop.Coatepeque,Coatepeque309S stainless steel strip,Some reasons for product composition ratio: in order to reduce the production cost, reduce the proportion content of some important elements such as chromium and nickel, and increase the content of other elements such as carbon. This production phenomenon that the composition ratio is not strictly in accordance with the product model and product characteristics not only greatly reduces the product quality, for example, when the chromium content of stainless steel pipe is insufficient, it not only affects the production The corrosion resistance and formability of products have potential product quality and safety hazards when they are used in chemical equipment and production industries. At the same time, they also affect the appearance and oxidation resistance of products.Various welding methods of combined welding stainless steel welded pipe have their own advantages and disadvantages. Combined welding methods include argon arc welding plus plasma welding, high-frequency welding plus plasma weldingThere shall be a special storage rack. The storage rack shall be a wooden or painted carbon steel support or padded with rubber pad to isolate it from carbon steel and other metal materials. During storage, collision with other components, purification and damage of iron metal.