The above is the correct sequence of impeller disassembly of submersible slurry pump. Because different types of pumps have some differences in structure, we also need to refer to the instructions when disassembling.　　The motor is scrapped. Moreover, because the length of the long shaft is generally fixed, the installation and use of the pump is troublesome, and the application occasions are subject to many restrictions.Azores,　　 Pipeline high-temperature oil pump, pipeline high-temperature chemical pump, pipeline high-temperature hot water pump. These models are designed to be formed on the basis of adding water cooling units,AzoresCentrifugal slurry pump, and the operating temperature can be as high as degrees or higher.　　Moreover, explosive and toxic liquid will cause fire, explosion and poisoning, and the consequences will be unimaginable.Tampico,　　Some of them are OK. For irrigation and other purposes in fact, we choose to use larger flow. Let&#;s take a look at the method of selecting pumps.　　A large amount of lubricating oil is stored.　　When this type of pump is used at ordinary times, the pump and motor operate in a coaxial whole. When it runs, the motor shaft will drive the impeller of the pump to rotate, and then at this time, the rotating force can be brought to the medium, so that

　　Avoid airborne sound transmission; Ensure the airtightness of machine room doors and windows. The water pump is equipped with a sound proof cover, and an exhaust fan is added inside the cover to ensure the ventilation of the equipment. At the same time, the inlet and outlet of the sound proof cover are equipped with silencing equipment. A vibration isolation platform is installed at the bottom of the water pump for foundation vibration reduction to isolate the vibration generated during the operation of the water pump　　 the experimental water shall meet the relevant process requirements.　　It is an auxiliary means for some on-site monitoring.Quality improvement,　　Vertical slurry pump is an early product. Submersible slurry pump is a new product developed with the improvement of social demand and operating environment.　　 When adding lubricating oil to the pump at ordinary times, the metering must be controlled, and the excess lubricating oil in the pump must be discharged and replaced regularly.　　 The difference between the vertical slurry pump and the submersible slurry pump The working position of the vertical slurry pump is different. The vertical slurry pump is partially immersed in the pit and cannot be completely immersed in the liquid level. The submersible slurry pump can be completely immersed (including the motor part) below the liquid level; Use of motor for vertical slurry pump

　　There is a difference between submersible slurry pump and sewage pump. Although the media conveyed by the two are not pure water and other media, the difference between slag slurry and sewage is still large. Let&#;s take a look at the difference between the two.investment,　　Occurrence of personal injury accident. The slurry pump is mainly used to transport water or similar media when in use. It can also be regarded as a common pump in our life, but it will also be overloaded when in use. Let&#;s have a look today　　Then start the spray pump. It is specially used for control equipment such as fire fighting, sprinkler and water curtain in high-rise and low-rise industrial and civil buildings. It is also suitable for restaurants, stores warehouses, underground garages and other places. The ordinary sprinkler head can be directly installed or hung on the sprinkler pipe network　　After meters,AzoresCarbon steel explosion-proof pipeline pump, the sealing of the equipment can not bear the water pressure at this depth.Azores,　　Normal operation. The submersible slurry pump can transport the slurry with corrosive or solid particles, some sand layers around the equipment will make the equipment covered by a large amount of sediment, and the current will slowly increase during use. Well, we should choose　　The whole packing body, including the packing gland, needs to be disassembled; Submersible slurry pump Disassemble the o-seal ring, shaft sleeve, balance disc and key on the shaft in turn,AzoresQuotation slurry pump, and then the discharge section includes the last stage guide vane　　Causes: there is air or gas accumulation in the water inlet pipe of the pump or the bottom valve is not closed tightly, the water supply is not satisfied, the packing of the vacuum pump leaks seriously, and the gate valve or flap valve is not closed tightly.